Accusplit Healthengine AH190M28 Operating Instructions

ACCUSPLIT, Inc.

3090 Independence Drive, Suite 148

Livermore, CA 94551 USA

800-935-1996  •  925-290-1900  •  FAX 925-290-1930

 www.ACCUSPLIT.com

  •  support@ACCUSPLI

T.com

Eat Right! Walk More! Live Well! 

e ACCUSPLIT Lifestyle

Operating  Instructions

ACCUSPLIT

AH190M28

PEDOMETER

DISPLAYS

CURRENT DAY

Display

 days 

1

 7329

MEMORY 

display area 

(flashes when in memory mode)

MEMORY 

button

(no clock 

in memory 

mode)

MEMORY

Display

 Mile/h 

3.21

9:58

 3.57

The pedometer has two display modes: CURRENT DAY and 

MEMORY. 

  1. CURRENT DAY display: Display area in lower right of  

    screen shows SPEEDOMETER function: Mile/h and  

    clock is present in lower left corner.

  2. MEMORY display: Memory display area in lower right  

    of screen shows which day’s results you are viewing.  

    To enter MEMORY display, first press the yellow MODE  

    button, then press the gray “M” button.  

    Return to CURRENT DAY display by repeatedly pressing  

    the gray “M” button until the memory display area goes  

    back to speed indication and the clock returns.

Make sure you are in CURRENT DAY display when setting up 

your pedometer and checking today’s results.

SETTING UP YOUR PEDOMETER 

ACCUSPLIT products use a common setting procedure, S1-

S2-S3-S4.

Press S1 for 2 seconds: Enter the SET mode

Press S2: Change the field to be set

Press S3: Change the field value

Press S4 for 2 seconds: Exit the SET mode

Setting the Clock 

The clock must be set in order for the memory’s automatic 

rollover function to work correctly.

 Mile/h 

2.04

5:18

8722

Clock

Speed

STEP count

2

3

4

5

  1. Repeatedly press the yellow MODE button until the  

    pedometer displays the current step count. (The  

    display will show a line underneath the word “STEP”  

    on the label.)

  2. 

S1:

 Press and hold the yellow S1 (MODE) button for 2  

    seconds. The HOUR display will start to blink, showing  

    that you’ve entered SET mode.

  3. 

S3:

 Press the S3 

▲

 (MEMORY) button to increase the  

    HOUR display. Press the S3 

▼

 (RESET) button to de- 

    crease the HOUR display. Hold the button down to  

    change hours quickly. PM hours are displayed in  

    military time (1:00 PM is 13:00, 2:00 PM is 14:00, etc.).

6

7

990-004B

How to Open your pedometer.

See diagrams at right.

ACCU

SPLIT

healthengine

125379

 15:15       785

MODE

MEMOR

Y

RESET