Accutome PachPen User Manual - page 13
www.accutome.com
• (800) 979-2020 US & CA • (610) 889-0200 International • +31 (0) 485-350300 Europe
8
Accutome PachPen Manual
CAUTION: USE ONLY THE STYLE AND TYPE OF BATTERY SPECIFIED. ANY OTHER STYLE
OR TYPE OF BATTERY MAY CAUSE DAMAGE TO THE PRODUCT AND INVALIDATE THE
WARRANTY.
Battery Installation
CAUTION: THE BATTERY IS POLARIZED SO THAT IT ONLY FITS INTO THE BATTERY
COMPARTMENT ONE WAY. CHECK TO BE SURE THAT THE BATTERY IS INSTALLED
CORRECTLY, AND DO NOT FORCE THE BATTERY INTO PLACE. INCORRECT BATTERY
INSTALLATION COULD CAUSE SEVERE DAMAGE TO THE PRODUCT AND INVALIDATE THE
WARRANTY.
To install the battery in the PachPen:
1. Locate the battery compartment on the underside of the PachPen and
open the compartment by unscrewing the captive battery door screw.
The battery door is hinged to the bottom of the handle and should not be
removed from the product.
2. Insert the XENO model XLP-050F lithium battery, or an equivalent, into the
battery compartment as shown in Figure 3.2.
3. Close the battery compartment door and screw the captive battery door
screw back into position to firmly hold the battery compartment door in a
closed position. Do not overtighten the screw.
Figure 3.2 - Battery Insertion
Instructions for Use
CAUTION: DO NOT AUTOCLAVE THE PACHPEN PACHYMETER.
Initial PachPen Pachymeter Setup
The steps below outline the basic setup of the PachPen.
1. If the battery is not installed in the PachPen, install the battery as described
in “Battery Installation” above.
2. If you wish to change the speed of sound setting for the unit, press and
hold the Action Control Button for 2 to 3 seconds until the Speed of Sound