Accutone USB400 VoIP COMMUNICATION HEADSET Installation Manual & User Manual - page 4
Setup new device from your computer.
3 LED INDICATIONS
4 INSTALLING USB DRIVER & SOFTWARE
The LED-indicator on the USB controller is able to display various status of the device,
and the definitions are listed as below:
To begin, you should restart your computer, and when your operating system finishes
loading, close all applications and connect the USB400 headset to any USB port in your
computer. This manual will use Windows XP interface as demonstration but the steps
should be identical for Windows 98SE, ME or 2000 versions.
(1) Connect USB400 headset to USB port of computer
(2) Insert "Driver & Software Installation CD" into your CD-ROM
(3) Setup program should start automatically
(4) If Setup program doesn't start, go to the root directory of your CD-ROM and click
on the setup.exe file
installing USB driver
steady GREEN light
STANDBY MODE
flashing GREEN light
OPERATING MODE
steady AMBER light
MUTED STANDBY
flashing AMBER light
MUTED OPERATING
the device is in
standby mode, ready
to receive or
transmit voice data.
the device is
operating, meaning
voice data is being
received.
the device is in
standby mode but
microphone is
muted and no data
is coming in or going
out.
the device is
operating, but
microphone has
been muted, the
device can receive
data but not
transmit.
Please note that after you plug in the USB400 headset, your operating system
may automatically launch the Hardware Installation Wizard. You should abort
such installation by pressing cancel, because you should use the Driver Software
CD for optimal performance.
* Apple Macintosh OS X automatically detects the USB device and loads up the driver instantly, no software or
driver installation is required.
to USB port
+
_
Hooking all the parts together!
1 CONNECTING THE COMPUTER
Connect the USB plug extended from the USB400 headset to the USB port of your
notebook or desktop computer. The LED indicator will light up indicating correct
connection to the computer.
2 ADJUSTING YOUR HEADSET
There are multiple points of adjustment with the USB400 headset, designed for comfort
as well as accomodating different preferences. The double-arm headband (A) is
extendable on both sides to fit different head sizes; and the aluminum voice tube (B) is
rotatable so users can place the microphone closer to their mouth if neccessary. The
suggested distance between a user's mouth and the microphone is 1/2 inch.
connection & setup
A
B
C
The voice tube rubber holder (C) also allows
adjustments, so users can shorten the
extension of the microphone capsule when
needed.
USB400 Headset
®
Accutone USB VoIP headset - Installation Guide & User Manual