El-320 cli020202 combustible gas leak detector user’s guide.
El-320 user’s guide 2 congratulations on the purchase of the accutools™ el-320 combustible gas leak detector, the most technologically advanced of its kind. The el-320’s low power requirements, small size and high sensitivity combine to create a tool which is easy to handle and ultra effective at lo...
El-320 user’s guide 3 instructions 1. Move the el-320 to a fresh-air environment. Press the button to turn the unit on. 2. The led will flash rapidly for a period of time (see warm- up time, below) to indicate warm-up and auto-calibration, afterwards the unit will begin beeping and flashing green. 3...
El-320 user’s guide 4 warm-up time the warm-up time for the el-320 will range between 25 seconds and 1.5 minutes. Each sensor has different warm-up characteristics that change with use over the life of the sensor. The el-320 has built-in intelligence that recognizes sensor differences and adjusts th...
El-320 user’s guide 5 recalibration when the el-320 is turned on, the unit automatically calibrates the sensor for maximum sensitivity. Occasionally, the signal from the sensor may drift (especially if moving from one location to another where the ambient humidity changes), causing a continuous alar...
El-320 user’s guide 6 sensor a el-320 sensor should last many hundreds of hours of continuous operation. A failed or failing sensor will be indicated by a continuous “siren” sound. In addition, it is recommended that the sensor be replaced yearly for optimum performance. Sensor replacement in either...
