ACDC Motorized Solutions RollerGlide Owner's Manual
1
ACDC Motorized Solutions Pty. Ltd.
RollerGlide
Rolling Door Operator
Owner manual
Congratulations on the purchase of a
RollerGlide
rolling door operator, this quality
product is designed to provide years of trouble free service
Operation
Two remotes controls are supplied
An optional fixed push button can be used
With each press of the button the door will open, stop or close
The courtesy light switches on for several minutes when the door is operated
Auto-Close
The Auto-Close feature can be selected to close the door automatically after 45
seconds
Safety
Timers are provided to stop the motor if it operates longer than the required time
The power transformer contains a thermal overload device to prevent the transformer
from overheating and causing a fire
The door should only be operated when it can be observed to avoid accidents
Emergency stopping
The
RollerGlide
will stop and reverse if the door is obstructed or jammed when
closing and will stop if the door is jammed when opening.
The obstruction force
setting must be set correctly for the function to operate properly.
Manual operation
The
RollerGlide
can be set for manual operation by pulling the service lever this
could be required if no power is available and the door has to be opened or closed
Open and Close limits
The
RollerGlide
is adjustable to stop the door at the correct place in both open and
closed positions
Adding extra remote controls (see figure 3)
Remove the white plastic light diffuser – beware of connected Push button
attached.
•
Press the LEARN button on the control panel
•
Press one of the buttons on the remote control which you wish to use
•
Wait a few seconds and press the same remote button again
•
To erase existing remote controls press and hold the LEARN button for 15
seconds
•
Up to 25 remote controls may be used
Other products available
Check our Website http://www.acdcms.com.au