Ace CTU-100 Installation And Operating Manual - page 5
- 5 -
ALL SPECIFICATIONS ARE SUBJECT TO CHANGE FOR IMPROVEMENT PURPOSES WITHOUT PRIOR NOTICE
AUDIO CRAFT ENGINEERING
FRONT PANEL AM/FM TUNER
1. CD/TUNER
No function in this version
2. BAND
Changes between AM and FM band
3. SLEEP
This button allows you to set acountdown timer to switch the tunermodule off. It is set in increments
of10mins from 90mins down to 10mins.Pressing this button while in sleepcountdown mode turns off
the sleepfunction.
4. DOWN
Changes the tuner frequency down.
5. UP
Changes the tuner frequency up.
6. ME-DOWN
Changes the preset number down.
7. ME-UP
Changes the preset number up.
8. 1
Select preset 1 / 6
9. 2
Select preset 2 / 7
10. 3
Select preset 3 / 8
11. 4
Select preset 4 / 9
12. 5
Select preset 5 / 10
13. +5
Toggles buttons 1 – 5 to 6 - 10
14. MEMORY
This button allows the memory settingto be programmed. To program amemory setting:1. Tune to the
frequency you want2. Press MEMORY(MEMO flashes on LCD display),3. Press a number from 1-5(or
+5 and a number for 6-10)4. Press MEMORY again.This process must be completed within4 secs or
you will need to start again.