Ex-g009 hdmi 1.3 over cat5 extender with ir control path user manual ace plus corp. Headquarters : 9f-2., no. 190 sec. 2 jung shing rd.,hsin-dian, taipei, taiwan 231 tel: +886-2-2912-4201 fax: +886-2-2912-3164 website: www.Ace-plus.Com page 1 of 11.
Safety and notice the ex-g009 hdmi 1.3 over cat5 extender with ir control path has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the ex-g009 should be used with care. Please read and follow t...
Introduction the ex-g009 hdmi 1.3 over cat5 extender with ir control path boosts up your hdmi transmission distance up to 60m (200ft) in hdtv 720p / 1080i format. With two low cost cat-5/5e/6 lan cables, users can readily extend hdtv sources from dvd players, blu-ray disc player, ps3, pc, and any ot...
Features z hdmi 1.3c compliant z extends the transmission distance up to 60m (200ft) from the sources under 1080i or 720p z extends the transmission distance up to 40m (130ft) from the sources under 1080p z provides independent ddc channel, fully hdcp compliant z minimizes the cable skew by adjustab...
Ace plus corp. Headquarters : 9f-2., no. 190 sec. 2 jung shing rd.,hsin-dian, taipei, taiwan 231 tel: +886-2-2912-4201 fax: +886-2-2912-3164 website: www.Ace-plus.Com page 5 of 11 model name ex-g006 ex-g009 ex-g007 technical ex-g006-tx ex-g006-rx ex-g009-tx ex-g009-rx ex-g007-tx ex-g007-rx aka ex-g0...
Panel descriptions front panel — transmitting unit ex-g009-tx hdmi in ir extender hdmi in: connect to a hdmi source with a hdmi m-m cable here ir extender: extendable infrared sending socket for plugging in the extension cable of ir emitter rear panel — transmitting unit ex-g009-tx tmds ddc tmds: pl...
Front view — receiving unit ex-g009-rx ir eq hdmi out extender hdmi out: connect to a hdmi display with a hdmi m-m cable here. Eq: adjust the 8-level equalization control knob to the received hdmi signals. 0 – 7 = strongest – weakest. It is recommended to switch from 7 to 0 to find the optimal visua...
Ir control path ir cables ir emitter cable ir receiver cable ir sockets ex-g009-tx ir extender: plug in the ir emitter cable here to transmit all ir command signals received from the ir receiver. Ex-g009-rx ir extender: plug in ir receiver cable connected here to receive all ir command signals from ...
Supported ir data format data format suitable not recommended nec 5 rc5 5 toshiba micom code 5 grundig code 5 sony 12 bit code 5 sony 15 bit code 5 sony 20 bit code 5 rca code 5 rcm code 5 matsushita code 5 mitsubishi code 5 zenith code 5 jvc code 5 m50560-001p 5 mn6125h 5 mn6125l 5 mn6014_c5d7 5 mn...
Notice 1. If the dvi or hdmi device requires the edid information, please use edid reader/writer to retrieve and provide dvi/hdmi edid information. 2. All hdmi over cat5 transmission distances are measured using belden 1583a cat5e 125mhz lan cable and astrodesign video signal generator vg-859c. 3. T...
Limited warranty the seller warrants the ex-g009 hdmi 1.3 over cat5 extender with ir control path to be free from defects in the material and workmanship for 1 year from the date of purchase from the seller or an authorized dealer. Should this product fail to be in good working order within 1 year w...
