Ace Plus EX-G015 User Manual - Dip Switch
DIP Switch
DIP Switch
Position
Pin#1
Pin#2
Pin#3
Pin#4
Video
Audio
Description
OFF
[
©
]
OFF
[
©
]
Up to
1080p
Stereo
2
Default Mode
3
– Up to 1080p & stereo audio output
for most HDTVs
OFF
[
©
]
ON
[
ª
]
Up to
720p/1080i
Stereo
Safe Mode
4
–
Enforce the system output at
720p/1080i video and stereo audio for basic
compatibility among HDTV
ON
[
ª
]
OFF
[
©
]
Bypass
5
Bypas
s
5
EDID Learning
6
Mode
– for learning EDID from the
display while playing any received HDMI audio format
ON
[
ª
]
ON
[
ª
]
Bypass Stereo
EDID Learning
6
& Stereo Mode
– for learning EDID
from the display while enforcing stereo output if any
HDTV cannot play surround sound normally
Note
1
Pin#1 and pin#2 are for HDMI INPUT 1; while pin#3 and pin#4 are for HDMI INPUT 2
2
If the HDTV shows video but without audio, please set audio mode to stereo.
3
Factory default setting is pin#1-OFF[
©
], pin#2-OFF[
©
], pin#3-OFF[
©
] & pin#4-OFF[
©
] for
1080p with stereo.
4
If you encounter any unsolved audio/video output problem during system installation,
please dial the DIP switch to pin#1-OFF[
©
], pin#2-ON[
ª
], pin#3-OFF[
©
], & Pin#4-ON[
ª
] for
safe mode to enforce the most compatible 720p stereo output for system check. However,
the safe mode cannot be initiated if your HDMI sources are set to enforce 1080p output. In
this case, please reconfigure your HDMI source to all resolution output for
troubleshooting.
5
Bypass means this device will maintain playing the original format of HDMI signals in
video and perhaps audio. By setting at this mode, the users may encounter compatibility
issue among different kinds of HDMI sources and displays. If you cannot get the audio
and/or video output normally at the system installation, please change the DIP switch
setting to default mode or even safe mode to verify the functionality of the device.
6
To learn the EDID of HDMI display for respective HDMI source devices, set (pin#1 and/or
pin#3) at ON[
ª
] first then connect the HDTV sets to respective HDMI inputs via HDMI
cables. Then please wait for 20 seconds for completing the EDID learning procedure. If you
want to learn the EDID from another HDTV, you must set pin#1 and/or pin#3) at OFF[
©
] first
and repeat this procedure all over again.
ACE PLUS CORP.
Headquarters :
9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,
Taipei, Taiwan 231
TEL: +886-2-2912-4201
FAX: +886-2-2912-3164
Website:
www.ace-plus.com
Page
7
of
11
www.ace-plus.tw