Ace Plus EX-G039 User Manual - Notice
1. Only HDMI enabled TV sets with
underscan/overscan
* support, the full active video can be
accurately displayed. Some HDMI equipped TV sets may not support this feature. If
underscan/overscan* is NOT supported, the top, bottom, left and right border of the active video
may be screened, and the S/PDIF audio may not sound right.
2. Analog stereo audio can merely support 2-channel audio. This version does NOT support
8-channel analog audio applications.
3. S/PDIF audio input supports 2-channel stereo audio input only.
4. S/PDIF supports only 48KHz audio sample rate. Other than this rate, the input digital audio should
be adjusted to 48KHz in order to get audio signal correctly sent.
*
The underscan mode displays the full video frame, which reveals content on the edge that is
recorded. In overscan, the field monitor zooms in to the area that would be visible on most
televisions. Set the field monitor to underscan if your video will be viewed on a computer monitor
or shown with a projector and also to look for light stands, microphones, and other unwanted
objects on the edges of your shot. Set it to overscan to see how the video will look on a television.
Notice
ACE PLUS CORP.
Headquarters :
9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,
Taipei, Taiwan 231
TEL: +886-2-2912-4201
FAX: +886-2-2912-3164
Website:
www.ace-plus.com
Page
8
of
9