Ex-g048 a 1x3 dvi splitter data sheet ace plus corp. Headquarters : 9f-2., no. 190 sec. 2 jung shing rd.,hsin-dian, taipei, taiwan 231 tel: +886-2-2912-4201 fax: +886-2-2912-3164 website: www.Ace-plus.Com page 1 of 11.
Safety and notice the ex-g048 a 1x3 dvi splitter has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, ex-g048 a should be used with care. Please read and follow the safety instructions to protec...
Introduction the ex-g048 a receives and reconstructs (equalizing & reclocking) a dvi signal and distributes it to three identical outputs. It can be perfectly cascaded with one another in order to obtain more dvi outputs (at least 6 tiers). Each output can be turned on/off individually through an ir...
Features connects a dvi video source to 3 dvi compatible displays (comes with a dvi y-cable) perfectly as a repeater by regenerating the dvi signal stackable, 8 devices stacked can support up to 17 outputs ir remote control allows switching outputs reads and remembers the edid of displays can be mod...
Front panel 1. Connect a dvi display here. 2. Connect a dvi display or two displays by a dvi y-cable. *while cascading, use the short line of the dvi y-cable to connect to the next ex-g048 a dvi input and the long line to connect to a display. Rear panel 3. 5v dc 4. Connect a device equipped with dv...
Bottom panel mode on open eq. Less noise but more power consumption. 1 off close eq. On writing default edid. * set the dip switch at on and plug in power cord. The green led will light after the writing process is completed. 2 off record edid of the connected display via dvi-out1 * plug in dvi cabl...
We suggest you connect the monitor with the lowest resolution support to the dvi-out 1. (e.G. Suppose monitor a might support a maximum resolution of 1920 x 1200, monitor b supports a maximum resolution of 1280 x 1024 and monitor c supports a maximum resolution of 1024 x 768, please connect monitor ...
Monitor 1 monitor 2 monitor 4 monitor 6 dvi pc 2 nd ex-g048 a 3 rd ex-g048 a 4 th ex-g048 a monitor 3 monitor 5 y-cable 1 st ex-g048 a ace plus corp. Headquarters : 9f-2., no. 190 sec. 2 jung shing rd.,hsin-dian, taipei, taiwan 231 tel: +886-2-2912-4201 fax: +886-2-2912-3164 website: www.Ace-plus.Co...
Remote control 1. Turn on/off all devices (id) and channels (ch). 2. Id selection mode. Press up or down arrow button to select an id. Once the id selected matches the id of the ex-g048 a , green led lights. 3. Channel selection mode. Press this button before you would like to turn on/off any channe...
Operation- single device long line short line monitor 1 monitor 2 monitor 3 1. If monitor 2 needs to be turned off, then follow the instruction below. 2. Press “ch” to enter to the channel selection mode. 3. Press “2” to make channel 2 (output 2) selected and then press “on/off” to turn off or turn ...
The seller warrants the ex-g048 a 1x3 dvi splitter to be free from defects in the material and workmanship for 1 year from the date of purchase from the seller or an authorized dealer. Should this product fail to be in good working order within 1 year warranty period, the seller, at its option, repa...