Ace Plus EX-G048C User Manual - Notice
Notice
1. While connecting a new monitor to the splitter, experiencing a short period of time no display may
be expected. Automatic EDID learning will analyze the newly connected monitor to see if the EDID
for the DVI input is necessary to update!
2. For long range high definition DVI transmission applications, please adopt CAT5/6 cable based
DVI extenders.
3. For firmware update through USB, users MUST first turn off the power, plug USB cable connected
to your PC, and then power up the module! In this setup, the power LED indicator will NOT blink,
and this is normal! Execute the attached or download EPFlash.exe, and the following window will
pop up. Click on “OpenFile” button to direct to the new firmware HEX file, and keep PORT at USB
0! Meantime, keep “Program With Verification” selected, and then click on “START” button on the
bottom of the window! Wait for seconds until the update process is completed! After firmware
update is successfully accomplished, please unplug USB cable and power off the splitter!
ACE PLUS CORP.
Headquarters :
9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,
Taipei, Taiwan 231
TEL: +886-2-2912-4201
FAX: +886-2-2912-3164
Website:
www.ace-plus.com
www.ace-plus.tw
Page
7
of
8