Acecad BTX-100 User manual - Trouble Shooting
7
JPG
\DigiMemo\My Memo
\DigiMemo
DHW
\DigiMemo\My Handwriting
(Selecting
Phone
Folder
in the DigiMemo Express software is to open
the
My Handwriting
folder.)
Trouble Shooting
Problem:
The digital pad and your phone do not connect
through
Bluetooth
connectivity.
Solution:
Please verify the following:
Turn on
Bluetooth
connectivity on your phone.
Turn on the digital pad into
Bluetooth
mode and
check the indicator light on the Transmitter remains
solidly lit.
The distance between the digital pad and your phone
is not over 10 meters (33 feet) and there are no walls
or other obstructions between the two devices.
If you have paired more than one Transmitter (BTX-
100) with your phone, you must select the right
Transmitter when prompted.
The Transmitter has paired with your phone.
Problem:
When you use the
Auto Capture
feature, a
large space is beside your desired handwriting area on the
captured picture.
Solution:
In the DHW file, any digital ink you write will be
captured by the feature. You may have written something
such as a dot or page number which is far away from your
desired handwritten area in the DHW file.
Specifications
Size
1.62" (W) x 0.98" (L) x 0.30" (T)
41.2 mm (W) x 24.8 mm (L) x 7.6 mm (T)
Weight
7.6 g (0.017 lbs)
Power Source
Supplied from the digital pad when connected
Smartphone
Requirements
Based on Symbian S60 3rd / 5th Edition (3.x /
5.x) / UIQ 3.x, or Windows Mobile 5 / 6 with
Bluetooth
wireless technology
Digital Notepad
Requirements
ACECAD DigiMemo L2 or A402