Acer DA241HL Quick Start Manual
1
English
DA241HL Quick Start Guide
Important safety instructions
Please read the following instructions carefully.
1
To clean the DA241HL screen:
•
Turn off the DA241HL and unplug the power cord.
•
Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2
Do not place the DA241HL near a window. Exposing the monitor to rain, moisture or sunlight can severely
damage it.
3
Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the
display.
4
Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform
servicing of any nature.
5
Store the DA241HL in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the DA241HL
outside this range may result in permanent damage.
6
Immediately unplug your monitor and call an authorized technician if any of the following circumstances
occur:
•
Monitor-to-PC signal cable is frayed or damaged.
•
Liquid spills onto the DA241HL or the monitor is exposed to rain.
•
The DA241HL or case is damaged.
Package contents
*
: Optional
Connecting your monitor to a computer
1
Turn off your computer and unplug your computer's power cord.
2
Connect the HDMI cable to the HDMI input socket of the monitor, and the HDMI output socket of the
graphics card on the computer.
3
Optional: Connect the micro USB port of the DA241HL and the USB-out port on the computer with the
USB cable.
4
Plug the DA241HL’s power adapter into the power port at the back of the monitor.
5
Plug the power cords of your computer and your monitor into a nearby electrical outlet.
6
Press the power button and the DA241HL turns on.
7
To switch to HDMI display, press the function keys to select or adjust an option.
Please refer to the User Guide for information about setting up your DA241HL.
Turning on for the first time
You will be asked some questions before you can use your monitor as a DA241HL.
To set up or access a Google account, connect your DA241HL to an Ethernet or Wi-Fi access point.
External controls
To change the volume, press the right function button to view the OSD. Slide the volume bar left or right.
DA241HL
Power cord and adapter
* Keyboard
and Mouse
* Mini USB
cable
* HDMI cable
(with MHL
support)
Quick start
guide and
setup guide
* User
manual
Power button
Turns the display on/off. White indicates power on.
When using the HDMI input, press the left function button to select or adjust an
option.