Table of contents special notes on lcd monitors........................................................ 1 information for your safety and comfort ............................... 2 unpacking .................................................................................................. 5 attaching...
T230h en- 1 special notes on lcd monitors the following symptoms are normal with lcd monitor and do not indicate a problem. Notes y due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the power switch and then turn it on again to make sure the flicker disa...
T230h information for your safety and comfort safety instructions read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Caution for accessibility be sure that the power outlet you plug the power cord into is easily acc...
T230h en- 3 product servicing do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified servic...
T230h en- 4 taking care of your vision long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room lighting, poorly focused screens, very small typefaces and low-contrast displays could stress your eyes. The following sections provide suggestions on how to reduce eyestrain...
T230h en- 5 unpacking please check the following items are present when you unpack the box, and save the packing materials in case you will need to ship or transport the monitor in future. Lcd monitor ac power cord d-sub cable dvi cable hdmi cable usb cable audio cable user manual quick start guide.
T230h en- 6 attaching / removing the base install: align the base with the stand and push the base towards the top ofthe monitor, and then rotate the base clockwise. Tighten the screw clock-wise. Remove: reverse the steps to remove the base..
T230h en- 7 screen position adjustment in oder to optimize the best viewing position, you can adjust the height/tilt/swivel of the monitor. Y height adjustment after pressing the top of the monitor, push the lock button towards right,then you can adjust the height of the monitor. Y tilt please see t...
T230h en- 8 y swivel with the built-in pedestal, you can swivel the monitor for the mostcomfortable viewing angle..
T230h en- 9 connecting the power cord y check first to make sure that the power cord you use is the correct type required for your area. Y this monitor has a universal power supply that allows operation in either 100/120v ac or 220/240 v ac voltage areas. No user-adjustment is required. Y plug one e...
T230h en- 10 power saving the monitor will be driven into power saving” mode by the control signal from the display controller, as indicated by the amber-color power led. State led light on blue power saving mode amber the power saving states will be kept until a control signal has been detected or ...
T230h en- 11 connector pin assignment 15-pin color display signal cable pin no. Description pin no. Description 1. Red 9. +5v 2. Green 10. Logic ground 3. Blue 11. Monitor ground 4. Monitor ground 12. Ddc-serial data 5. Ddc-return 13. H-sync 6. R-ground 14. V-sync 7. G-ground 15. Ddc-serial clock 8....
T230h en- 12 24-pin color display signal cable pin no. Description pin no. Description 1. Tmds data2- 13. Tmds data3+ 2. Tmds data2+ 14. +5v power 3. Tmds data 2/4 shield 15. Gnd(return for +5v hsync.Vsync) 4. Tmds data4- 16. Hot plug detect 5. Tmds data4+ 17. Tmds data0- 6. Ddc clock 18. Tmds data0...
T230h en- 13 standard timing table mode resolution 1 vga 640 x 480 60 hz 2 vga 640 x 480 66.6 hz 3 vesa 720 x 400 70 hz 4 svga 800 x 600 56 hz 5 svga 800 x 600 60 hz 6 xga 1024 x 768 60 hz 7 xga 1024 x 768 70 hz 8 vesa 1152 x 864 75 hz 9 wxga 1280 x 800 60 hz 10 sxga 1280 x 1024 60 hz 11 wxga+ 1440 ...
T230h en- 14 installation to install the monitor to your host system, please follow the steps as given below: steps make sure both the monitor and computer are powered-off. 1. 1-1 connect video cable connect the vga video cable to the computer. 1-2 connect digital cable . Connect one end of the 24-p...
T230h en- 15 user controls front panel controls 1.Power switch: to turn on or off the power. 2.Power led: lights up to indicate the power is turned on. 3.Empowering / exit: 1) when osd menu is in active status, this button will act as exit-key(exit osd menu). 2) when osd menu is in off status, press...
T230h en- 16 how to adjust a setting 1. Press the menu-button to activate the osd window. 2. Press to select the desired function. 3. Press the menu-button to select the function that you want to adjust. 4. Press to change the settings of the current function. 5. To exit and save, select the exit fu...
T230h en- 17 adjusting the picture the descriptions for function control leds a. Acer ecolor management main menu icon sub menu icon sub menu item description n/a user mode user defined. Settings can be fine-tuned to suit any situation n/a text mode optimal balance of brightness and contrast prevent...
T230h en- 18 main menu icon sub menu icon sub menu item description h. Position adjust the horizontal position. (available in analog mode only) v. Position adjust the vertical position. (available in analog mode only) n/a warm set the color temperature to warm white. N/a cool set the color temperatu...
T230h en- 19 acer ecolor management osd operation instructions acer ecolor management step 1: press “ key” to open the acer ecolor management osd and access the scenario modes step 2: press “” to select the mode step 3: press “auto key” to confirm the mode and run auto adjust features and benefits m...
T230h en- 20 troubleshooting before sending your lcd monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. (vga mode) problems current status remedy led on y using osd, adjust brightness and contrast to maximum or reset to their default setti...
T230h en- 21 energy star ® acer’s energy star qualified products save you money by reducing energy costs and helps protect the environment without sacrificing features or performance. Acer is proud to offer our customers products with the energy star mark. What is energy star? Products that are ener...
Acer incorporated 8f, 88, sec. 1, hsin tai wu rd., hsichih taipei hsien 221, taiwan declaration of conformity we, acer incorporated 8f, 88, sec. 1, hsin tai wu rd., hsichih, taipei hsien 221, taiwan contact person: mr. Easy lai tel: 886-2-8691-3089 fax: 886-2-8691-3120 e-mail: easy_lai@acer.Com.Tw h...
Acer america corporation 333 west san carlos st., san jose ca 95110, u. S. A. Tel : 254-298-4000 fax : 254-298-4147 www.Acer.Com federal communications commission declaration of conformity this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1) t...
