1. DL manuals
  2. Acer
  3. Laptop
  4. Veriton 3500
  5. Service Manual

Acer Veriton 3500 Service Manual

Other manuals for Veriton 3500: User Manual, User Manual, User Manual, User Manual, Service Manual
Manual is about: Aspire Digital Personal Computer

Summary of Veriton 3500

  • Page 1

    Veriton 3500/5500/7500 service guide part no.: printed in taiwan service guide files and updates are available on the aipg/csd web; for more information, please refer to http://csd.Acer.Com.Tw.

  • Page 2: Revision History

    Ii revision history please refer to the table below for the updates made on veriton 3500/5500/7500 service guide. Date chapter updates.

  • Page 3: Copyright

    Iii copyright copyright © 2002 by acer incorporated. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optica...

  • Page 4: Conventions

    Iv conventions the following conventions are used in this manual: screen messages denotes actual messages that appear on screen. Note gives bits and pieces of additional information related to the current topic. Warning alerts you to any damage that might result from doing or not doing specific acti...

  • Page 5: Preface

    V preface before using this information and the product it supports, please read the following general information. 1. This service guide provides you with all technical information relating to the basic configuration decided for acer's "global" product offering. To better fit local market requireme...

  • Page 6

    Vi.

  • Page 7: Table Of Contents

    Vii table of contents chapter 1 system specifications 1 overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 fr...

  • Page 8: Table Of Contents

    Viii table of contents removing the intrusion alarm cable module . . . . . . . . . . . . . . . . . . . . . . 77 removing the dimm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77 removing and installing the rtc battery . . . . . . . . . . . . . . . . . . . . . . ...

  • Page 9: Table Of Contents

    Ix table of contents chapter 4 troubleshooting 110 power-on self-test (post) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111 post error messages list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117 error symptoms list . . . . . . . ...

  • Page 10: Overview

    Chapter 1 1 overview the veriton 3500, 5500, 7500 supports intel ® pentium iv (willamette 478/northwood) flip chip-pin grid array 2 processor (fc-pga2) based micro atx, ibm pc/at compatible system with pci bus. The veriton 3500g, 5500g, 7500g supports intel ® pentium iv (willamette 478/northwood) fl...

  • Page 11: Features

    2 veriton 3500/5500/7500 features performance ! Intel pentium® iv processor with intel netburst™ micro-architecture and integrated 256kb/ 512kb embedded l2 cache memory in flip chip 2 (fc)-mpga 478 socket form factor, with supporting cpu clock up to 2.4ghz+. ! System front side bus speed:400/533 mhz...

  • Page 12

    Chapter 1 3 ! High-speed 56k v9.0 fax/data/voice pci modem (optional) ! One rj45 connector supports ieee 802.3./802.3u 10base-t/100base-tx-compatible network with remote wake-up function (wfm 2.0 complaint) expansion ! 3 pci slots + 2 dimm slots+ 1 agp slot (no agp slot for veriton 3500, 5500 and 75...

  • Page 13

    4 veriton 3500/5500/7500 front panel-veriton 3500/3500g the computer’s front panel consists of the following: label icon description 1 floppy drive light-emitting diode (led 2 3.5-inch floppy drive 3 floppy drive eject button 4 cd-rom/dvd-rom/cd-rw headphone/earphone port 5 volume control tune 6 cd-...

  • Page 14

    Chapter 1 5 note: *the system has two microphone-in ports (front and rear). However, you cannot use both of them at the same time. The default setting for your system enables the microphone-in port in front and disables the one at the back. 14 lan activity led 15 power led 16 power button label icon...

  • Page 15

    6 veriton 3500/5500/7500 rear panel-veriton 3500/3500g label icon color description 1 power supply 2 voltage selector switch 3 keyhol 4 green ps/2 mouse port 5 power jack (for external speakers) 6 teal or turquoise serial port 7 burgundy parallel/printer port 8 blue crt/lcd monitor port* 9 white net...

  • Page 16

    Chapter 1 7 note: * the crt monitor port is automatically disabled when an add-on agp vga card is installed into the system. Connect the monitor to the vga port instead. (available for s88m/ g) note: ** the system has two microphone-in ports (front and rear). However, you can not use both of them at...

  • Page 17

    8 veriton 3500/5500/7500 front panel-veriron 5500/5500g the computer’s front panel consists of the following: label icon description 1 hard disk drive activity light-emitting diode (led) 2 lan activity led 3 power led 4 power button 5 cd-rom/dvd-rom headphone/earphone port 6 floppy drive light-emitt...

  • Page 18

    Chapter 1 9 note: * the system has two microphone-in ports (front and rear). However, you can not use both of them at the same time. The default setting for your system enables the microphone-in port in front and disables the one at the back. 15 headphone/ earphone port 16 microphone-in port (front)...

  • Page 19

    10 veriton 3500/5500/7500 rear panel-veriton 5500/5500g label icon color escription 1 voltage selector switch 2 green ps/2 mouse port 3 power jack (for external speakers) 4 teal or turquoise serial port 5 burgundy parallel/printer port 6 blue monitor port* 7 white network port 8 keyhol 9 black modem...

  • Page 20

    Chapter 1 11 note: * the crt monitor port is automatically disabled when an add-on agp vga card is installed into the system. Connect the monitor to the vga port instead. (available for s88m/ g) note: ** the system has two microphone-in ports (front and rear). However, you can not use both of them a...

  • Page 21

    12 veriton 3500/5500/7500 front panel-veriton 7500/7500g the computer’s front panel consists of the following: label icon description 1 cd-rom/dvd-rom tray 2 stop/eject butto 3 skip/forward button 4 hard disk drive activity light-emitting diode (led) 5 lan activity le 6 power led 7 power button 8 cd...

  • Page 22

    Chapter 1 13 note: * the system has two microphone-in ports (front and rear). However, you can not use both of them at the same time. The default setting for your system enables the microphone-in port in front and disables the one at the back. 9 volume control tuner 10 headphone/earphone port 11 5.2...

  • Page 23

    14 veriton 3500/5500/7500 rear panel-veriton 7500/7500g label icon color description 1 voltage selector switch 2 power cord socket 3 burgundy parallel/printer port 4 white network port 5 power jack (for external speakers) 6 power supply 7 green ps/2 mouse port 8 purple ps/2 keyboard port.

  • Page 24

    Chapter 1 15 note: * the crt monitor port is automatically disabled when an add-on agp vga card is installed into the system. Connect the monitor to the vga port instead. (available for s88m/ g) note: * *the system has two microphone-in ports (front and rear). However, you can not use both of them a...

  • Page 25: Brookdale-Gl

    16 veriton 3500/5500/7500 system block diagram (veriton 3500/ 5500/ 7500) willamette/ northwood processor brookdale-gl gmch ich4 6 usb 2.0 ports 2 ata 100 ide channels lan connect ac97’ audio codec ddr-266/ 200 ddr-266/ 200 pc i sl ot pc i slot pc i slot sio fwh scaleable bus 3.2gb/s 2.12gb/s 8-bit ...

  • Page 26: Brookdale-G

    Chapter 1 17 system block diagram (veriton 3500g/ 5500g/ 7500g) willamette/ northwood processor brookdale-g gmch ich4 agp 6 usb 2.0 ports 2 ata 100 ide channels lan connect ac97’ audio codec ddr-266/ 200 ddr-266/ 200 pci sl o t pci sl ot pci sl ot sio fwh scaleable bus 3.2gb/s (4.25gb/s) 2.12gb/s 8-...

  • Page 27

    18 veriton 3500/5500/7500 main board layout (veriton 3500/ 5500/ 7500) (s88m/ gl) 30 29 28 27 26 17 1 36 35 34 33 32 31 18 9 13 14 15 16 19 20 21 2 3 4 5 6 7 8 10 11 12 22 23 25 37 38.

  • Page 28

    Chapter 1 19 main board layout (veriton 3500g/5500g/7500g) (s88m/ g) 30 29 28 27 26 17 1 36 35 34 33 32 31 18 9 13 14 15 16 19 20 21 2 3 4 5 6 7 8 10 11 12 22 23 24 25 37 38.

  • Page 29

    20 veriton 3500/5500/7500 note: *: default setting note: **: intel 845 gl (veriton 3500/ 5500/ 7500); intel 845g (veriton 3500g/ 5500g/ 7500g) note: ***: not for brookdale-gl label component label component 1 game port 20 pci slot 2 2 fdd connector 21 pci slot 3 3 ide 2 connector 22 cd-in connecto 4...

  • Page 30

    Chapter 1 21 keyboard (3500/ 3500g, 5500/ 5500g, 7500/ 7500g) the keyboard has full-sized keys that include separate cursor keys, two windows keys, and twelve function keys. Icon component description 1 function keys access most of the computer's controls like screen brightness, volume output and th...

  • Page 31

    22 veriton 3500/5500/7500 9 volume control/mute knob controls the speaker volume. Turn it clockwise or counterclockwise to adjust the volume. Press it to toggle between mute and sound. 10 multimedia keys allow you to do the following: • play/pause button : press to start playing the audio track or v...

  • Page 32

    Chapter 1 23 hardware specifications and configurations note: the bios can be overwritten/upgraded using the flash utility (awdflash.Exe). Processor item specification type intel® pentium iv fc-pga2 processors with mpga478 package slot socket mpga478 speed internal: 1.4~2.4ghz+ external: 400/533mhz ...

  • Page 33

    24 veriton 3500/5500/7500 this section has two table lists, system memory specification and the possible combinations of memory module. *x, y, z: 0~2gb system memory item specification memory socket numbe 2 sockets (4 rows) support memory size per socket 64/128/256/512mb support maximum memory size ...

  • Page 34

    Chapter 1 25 note: s88m/ gl for veriton 3500/ 5500/ 7500 doesn’t have agp vga slot. Cache memory item specification first-level cache configurations cache function control enable/disable by bios setup (advanced options) second-level cache configurations: below information is only applicable to syste...

  • Page 35

    26 veriton 3500/5500/7500 audio interface item specification audio controller embedded in intel 82801db ich 4 audio controller resident bus ac’97 link audio function control enable/disable by bios setup mono or stere stereo resolution 20 bits compatibility ac’97 2.1 compliant sound blaster pro compa...

  • Page 36

    Chapter 1 27 mtbf (mean time between failure) 30,000 floppy disk drive controller embedded in smsc lpc47m192 floppy disk drive controller resident bus lpc support fdd format 360kb, 720kb, 1.2mb, 1.44mb, 2.88mb; 3-mode hard disk drive interface item specification vendor & model name seagate u series ...

  • Page 37

    28 veriton 3500/5500/7500 power requirement +5v +12v voltage tolerance +/-5% +/-5% standby (sleep) 150ma 2ma avtiv 500ma 1.2a cd-r/w interface item specification vendor & model name aopen crw3248 transfer rate (kb/sec) sustained: max 6000 kb/sec average access time 100ms data buffer capacity 8mb/ 2m...

  • Page 38

    Chapter 1 29 optional serial port i/o address (via bios setup) 2f8-2ff 3f8-3ff optional serial port irq (via bios setup) 4, 3 modem item specification fax modem data baud rate (bps) 14.4k bps data modem data baud rate (bps) 56k bps voice modem yes modem connector type rj11 full duplex yes usb port i...

  • Page 39

    30 veriton 3500/5500/7500 note : upper limit means the maximum size of installed memory. The main memory maximum size are 768m bytes. Memory address map address size function 000000 - 07ffff 512kbyte host memory 080000 - 09ffff 128kbyte host/pci memory 0a0000 - 0bffff 128kbyte pci/isa video buffer m...

  • Page 40

    Chapter 1 31 note: n - not be used. I/o address map hex range devices 000-00f 020-021 040-043 060-060 061-061 070-071 081-08f 0a0-0a1 0c0-0df 0f0-0ff 170-177 1f0-1f7 278-27f 2f8-2ff 378-37f 3f0-3f5 3f6-3f6 3f7-3f7 3f8-3ff 0cf8 0cfc 778-77a dma controller-1 interrupt controller-1 system timer keyboar...

  • Page 41

    32 veriton 3500/5500/7500 note: n - not to be used. Drqx assignment map drqx system devices add-on-card devices drq0 n (notes) reserved drq1 n reserved drq2 floppy diskette n drq3 n reserved drq4 cascade n drq5 n reserved drq6 n reserved drq7 n reserved main board major chips item controller north b...

  • Page 42

    Chapter 1 33 (this is 145w power supply) ! This “4a” includes the outlet supply current: 2a ! Measure at line input 90 vrms and maximum load condition. Note: 1. +5v & +3.3v total power is 80w max . Mechanical specifications item specification dimensions 244(l)x 244(w)x18mm(h) weight one 3.5 fdd and ...

  • Page 43: Power Management Functions

    34 veriton 3500/5500/7500 power management functions device standby mode ! Independent power management timer for hard disk drive devices (0-15 minutes, time step=1 minute). ! Hard disk drive goes into standby mode (for ata standard interface). ! Disable v-sync to control the vesa dpms monitor. ! Re...

  • Page 44: System Utilities

    Chapter 2 36 most systems are already configured by the manufacturer or the dealer. There is no need to run setup when starting the computer unless you get a run setup message. The setup program loads configuration values into the battery-backed nonvolatile memory called cmos ram. This memory area i...

  • Page 45: Entering Setup

    37 veriton 3500/5500/7500 entering setup to enter setup, press the key c c c c during the post (power-on self-test). Note: you must press c c c c simultaneously while the system is booting. The setup utility main menu then appears: the above screen is the bios utility basic level screen. It allows y...

  • Page 46: Product Information

    Chapter 2 38 product information the screen below appears if you select product information from the main menu: the product information menu contains general data about the system, such as the product name, serial number, bios version, etc. These information is necessary for troubleshooting (maybe r...

  • Page 47: Standard Cmos Features

    39 veriton 3500/5500/7500 standard cmos features select “standard cmos features” from the main menu to configure the drives installed in your system. The following screen shows the disk drives menu: the following table describes the parameters found in this menu. Parameter description options date l...

  • Page 48

    Chapter 2 40 drive a allows you to configure your floppy drive a. 1.44 mb, 3.5-inch none 360 kb, 5.25-inch 1.2 mb, 5.25-inch 720 kb, 3.5-inch 2.88 mb, 3.5-inch drive b allows you to configure your floppy drive b. None 360 kb, 5.25-inch 1.2 mb, 5.25-inch 720 kb, 3.5-inch 1.44 mb, 3.5-inch 2.88 mb, 3....

  • Page 49

    41 veriton 3500/5500/7500 ide primary master/slave and ide secondary master/slave setup the following screen appears if you select any of the ide drive parameters: the following table describes the parameters found in this menu. Parameter description options ide hdd auto- detection auto-detects your...

  • Page 50: Advanced Bios Features

    Chapter 2 42 advanced bios features the following screen shows the advanced bios features. The following table describes each advanced bios features parameter. Settings in boldface are the default and suggested settings. Parameter description options virus warning allows you to choose the virus warn...

  • Page 51

    43 veriton 3500/5500/7500 boot other device this parameter allows you to specify the syste boot up search sequence. Enabled disabled security option the setup option limits access only to bios setup. To disable the security option, select password setting from the main menu, don’t type anything and ...

  • Page 52: Advanced Chipset Features

    Chapter 2 44 advanced chipset features the following screen shows the advanced chipset features. The following table describes each advanced chipset features parameter. Settings in boldface are the default and suggested settings. Parameter description options memory hole at 15m-16 this option lets y...

  • Page 53: Integrated Peripherals

    45 veriton 3500/5500/7500 integrated peripherals the following table describes each integrated peripherals parameter. Settings in boldface are the default and suggested settings. Parameter description options on-chip primary pci ide on-chip secondary pci ide these parameters let you enable or disabl...

  • Page 54

    Chapter 2 46 ide primary master pio ide primary slave pio ide secondary master pio ide secondary slave pio setting these items to auto activates the hdd speed auto-detect function. The pio mode specifies the data transfer rate of the hdd. For example, mode 0 data transfer rate is 3.3 mb/s, mode 1 is...

  • Page 55

    47 veriton 3500/5500/7500 onboard serial port 2 this item allows you to assign an address and interrupt for the board serial port. 2f8/ irq3 auto 3f8/ irq4 3e8/ irq4 2e8/ irq3 disabled onboard parallel port this item controls the onboard parallel port address an interrupt. Note: if you are using an ...

  • Page 56: Power Management Setup

    Chapter 2 48 power management setup the power management menu lets you configure the system power-management feature. It works only in apm mode. Important:if an acpi-aware operating system such as windows 98 or windows 2000 is installed in acpi mode, the operating system will use the acpi interfaces...

  • Page 57

    49 veriton 3500/5500/7500 the following table describes the parameters found in this menu. Parameter description options run vgabios if s3 resume auto:bios decides whether the vga bios should initiate or not. If the default is set to “yes”, then the vga bios initiates automatically. If it is set to ...

  • Page 58

    Chapter 2 50 note: in acpi mode: valid-s5 and s4. In apm mode: valid- shutdown resume by alarm (function enabled in acpi and apm mode) use this option to set the date and time for you computer to boot up. Date (of month) alarm * - indicate month when system will boot up. Set it to 0 if you want to b...

  • Page 59: Pnp/pci Configurations

    51 veriton 3500/5500/7500 pnp/pci configurations the table below describes each pnp/pci configuration parameter. Settings in boldface are the default and suggested settings. Parameter description options reset configuration dat select enabled to reset extended system configuration data (escd) when y...

  • Page 60

    Chapter 2 52 pci/vga palette snoop this parameter permits you to use the palette snooping feature if you installed more than one vga card in the system. The pvi/vga palette snoop function allows the control palette register (cpr) to manage and update the vga ramdac (digital analog converter, a color...

  • Page 61: Pc Health Status

    53 veriton 3500/5500/7500 pc health status parameter description options cpu shutdown temperature (function enabled in acpi mode) when the temperature of the cpu reaches th default value, the system will shut down by initiating beep sounds. 90 degree c/ 194 degree f 60 degree c/ 140 degree f 70 degr...

  • Page 62

    Chapter 2 54 system warning temperature(function enabled in acpi mode when the temperature of the system reaches the default value, the system will give warning by initiating beep sounds. 55 degree c/ 131 degree f 25degree c/ 77 degree f 35 degree c/ 95 degree f 45 degree c/ 113 degree f disabled 65...

  • Page 63: Frequency Control

    55 veriton 3500/5500/7500 frequency control the following table describes the parameters found in this menu. Parameter description processor indicates the type of processor installed in your computer. Processor spee indicates the processor speed..

  • Page 64: System Security

    Chapter 2 56 system security the setup program has a number of security features to prevent unauthorized access to the system and its data. Supervisor password to set a password: 1. At the prompt, type your password. Your password can be up to 8 alphanumeric characters. When you type the characters,...

  • Page 65

    57 veriton 3500/5500/7500

  • Page 66

    Chapter 2 58 user password important:to show the “set user password”: 1. Choose “set superviser password” and press e e e e . 2. Type the password and then press e e e e . 3. Confirm the password, and then press e e e e . 4. The screen as below with “set user password” enabled will be shown. To set ...

  • Page 67

    59 veriton 3500/5500/7500 bypassing the password if you forgot your password, you can bypass the password security feature thru hardware configuration. Rtc battery follow these steps to bypass the password: 1. Turn off and unplug the system. 2. Open the system housing. Take off battery and short it....

  • Page 68: Load Default Settings

    Chapter 2 60 load default settings you need to reload the bios default settings every time you make changes to your system hardware configuration (such as memory size, cpu type, hard disk type, etc.); otherwise, bios will keep the previous cmos settings. Selecting this option displays the following ...

  • Page 69: Exiting Setup

    61 veriton 3500/5500/7500 exiting setup to exit the bios utility, simply press ^ ^ ^ ^ . The following dialog box appears: select yes to exit setup. Select no to return to the main menu. If you have made changes in the parameter settings, you will be asked if you want to keep the changes made to the...

  • Page 70: Advanced Options

    Chapter 2 62 advanced options note: the advanced options menu is available only when you press a a a a + o o o o in the main menu. The “advanced options” menu allows you to configure the system memory and pci device settings. The following screen shows the advanced options parameter: caution: do not...

  • Page 71

    63 veriton 3500/5500/7500 advanced bios features selecting “advanced bios features” from the advanced options menu displays the following screen: the following table describes the parameters found in the sub- menu. Settings in boldface are the default and suggested settings. Parameter description sy...

  • Page 72

    Chapter 2 64 advanced chipset features selecting “advanced bios features” from the advanced options menu displays the following screen. The following table describes the parameters found in the sub-menu. Settings in boldface are the default and suggested settings. . Parameter description options cpu...

  • Page 73

    65 veriton 3500/5500/7500 integrated peripherals . Parameter description option dram timing selectable cas latency time active to precharge delay dram ras #to cas# delay dram ras# precharge sdram timing the default setting by your dram’s spd. The default setting by your dram’s spd. The default setti...

  • Page 74

    Chapter 2 66 the followingtable describes the parameters found in the sub-menu. Settings in boldface are the default and suggested settings. Power management setup selecting “power management setup” from the advanced options menu displays the following screen: parameter description option uart mode ...

  • Page 75

    67 veriton 3500/5500/7500 the followingtable describes the parameters found in the sub-menu. Settings in boldface are the default and suggested settings..

  • Page 76

    Chapter 2 68 note: these are global timer events. The followingtable describes the parameters found in the sub-menu. Frequency control selecting “ frequency control” from the advanced options menu displays the following screen: parameter description option acpi functiont acpi power management enable...

  • Page 77

    69 veriton 3500/5500/7500 the followingtable describes the parameters found in the sub-menu. Parameter description option cpu clock ratio core clock frequency to system bus ratio (ro) the option items vary depending on your bios. Min=10 max=24 key in a dec number auto detect pci clk detect pci card....

  • Page 78

    Chapter 3 70 this chapter contains step-by-step procedures on how to disassemble the veriton 3500/ 5500/ 7500 and the veriton 3500g/ 5500g/ 7500g desktop computer for maintenance and troubleshooting. To disassemble the computer, you need the following tools: q wrist grounding strap and conductive ma...

  • Page 79: General Information

    71 veriton 3500/5500/7500 general information before you begin before proceeding with the disassembly procedure, make sure that you do the following: 1. Turn off the power to the system and all peripherals. 2. Unplug the ac adapter and all power and signal cables from the system..

  • Page 80

    Chapter 3 72 veriton 3500/ 3500g disassembly flow chart note: there is no agp vga slot for veriton 3500. Housing cover front bezel rtc battery main unit front panel a g p v g a card lan card rotate bracket w / d v d - r o m & fdd module emi audio cover usb/audio board module power supply d v d - r o...

  • Page 81

    73 veriton 3500/5500/7500 disassembling the veriton 3500/ 3500g opening the housing this section tells you how to open the housing cover when you need to install additional components inside the system unit. Caution: before you proceed, make sure that you have turned off the system and all periphera...

  • Page 82

    Chapter 3 74 removing the front panel 1. See “removing the housing cover” on page 73 2. Remove the four screws as shown here. 3. Detach the front bezel from the front panel gently in the way as shown here. Removing the agp vga card 1. See “removing the housing cover” on page 73 2. Remove the screw a...

  • Page 83

    75 veriton 3500/5500/7500 removing the lan card 1. See “removing the housing cover” on page 73 2. Remove the screw as shown below and then remove the modem card from the slot. Removing the emi audio cover 1. See “removing the housing cover” on page 73 2. Press and then remove the emi audio cover fro...

  • Page 84

    Chapter 3 76 5. Disconnect the intrusion alarm cable from the main board and then pull the fdd and dvd frame from the lower case . 6. Remove the floppy disk drive cable and optical drive ide cable from the main board. . 7. Remove the four screws as shown here then detach the dvd-rom drive from the f...

  • Page 85

    77 veriton 3500/5500/7500 removing the intrusion alarm cable module 1. See “removing the housing cover” on page 73 2. See “removing the fdd and dvd frame” on page 75 3. Disconnect the cable from the main board , use the flat screwdriver to release the latches and then detach the intrusion alarm cabl...

  • Page 86

    Chapter 3 78 removing and installing the rtc battery 1. See “removing the housing cover” on page 73 2. Press the latch to release the rtc battery, lift up the rtc battery. To install the rtc battery, put it back and press it into the correct position to secure it well.Press the latch to release the ...

  • Page 87

    79 veriton 3500/5500/7500 removing the usb/ audio board 1. See “removing the housing cover” on page 73 2. See “removing the fdd and dvd frame” on page 75 3. See “removing the lan card” on page 75 4. Disconnect the memory stick cable and usb cable from the main board. . 5. Disconnect the memory stick...

  • Page 88

    Chapter 3 80 removing the hard disk drive 1. See “removing the housing cover” on page 73 2. See “removing the fdd and dvd frame” on page 75 3. Disconnect the hard disk drive ide from the main board. Detach the hard disk drive power connector and hard disk drive ide cable from the hard disk drive. 4....

  • Page 89

    81 veriton 3500/5500/7500 removing the led activity indicators 1. See “removing the housing cover” on page 73. 2. See “removing the fdd and dvd frame” on page 75” 3. See “removing the hard disk drive” on page 80 4. Disconnect the power led, hard disk drive activity led and network activity cables fr...

  • Page 90

    Chapter 3 82 removing the power supply 1. See “removing the housing cover” on page 73. 2. Disconnect the fdd power connector from the fdd drive and the dvd-rom power connector from the dvd-rom drive. 3. Remove the hard disk drive power connector from the hard disk drive. 4. Disconnect the main power...

  • Page 91

    83 veriton 3500/5500/7500 4. Remove the cpu fan sink from the main board and then put the levers back to their original positions. Warning:the heatsink becomes very hot when the system is on. Never touch the heatsink with any metal or with your hands. Removing and installing the processor 1. See “re...

  • Page 92

    Chapter 3 84 removing the system main board 1. See “removing the housing cover” on page 73 2. See “removing the fdd and dvd frame” on page 75 3. See “removing the agp vga card” on page 74 4. See “removing the lan card” on page 75 5. Before you remove the system main board, make sure that all cables ...

  • Page 93

    85 veriton 3500/5500/7500 veriton 5500/ 5500g disassembly procedure flowchart note: there is no agp slot for veriton 5500. Housing cover main unit d u m m y l i n k bar link bar d i m m led activity indicators m o d e m c a r d a g p v g a c a r d main board c p u c p u f a n s i n k rtc battery u s...

  • Page 94

    Chapter 3 86 disassembling the veriton 5500/ 5500g open the housing cover this section tells you how to open the housing cover when you need to install additional components inside the system unit. Caution: before you proceed, make sure that you have turned off the system and all peripherals connect...

  • Page 95

    87 veriton 3500/5500/7500 removing the empty cover 1. See “removing the housing cover” on page 86 2. See “removing the front panel” on page 86 3. Release the latches as shown here and then detach the empty cover from the front panel . Removing a dummy link bar 4. See “removing the housing cover” on ...

  • Page 96

    Chapter 3 88 removing the agp vga card 1. See “removing the housing cover” on page 86 2. Remove the screw on the bracket of the agp card. Set the screw aside, you will need it when inserting the agp card. 3. Gently pull out the agp card to remove it from the agp slot . Note: there is no agp slot for...

  • Page 97

    89 veriton 3500/5500/7500 . 5. Disconnect the usb cable and memory stick cable from the usb/ audio board consecutively. Removing a dimm 1. See “removing the housing cover” on page 86 2. See “removing a dummy link bar” on page 87 3. Press the levers on both sides of the dimm socket outward to release...

  • Page 98

    Chapter 3 90 removing the cpu fan sink 1. See “removing the housing cover” on page 86 2. See “removing a dummy link bar” on page 87 3. Detach the fan/heatsink cable connector and release the two cpu fan sink levers from the cpu fan sink socket carefully, and then lift the fan/heatsink from the proce...

  • Page 99

    91 veriton 3500/5500/7500 removing and installing the processor 1. See “removing the housing cover” on page 86 2. See “removing a dummy link bar” on page 87 3. See “removing the cpu fan sink” on page 90 4. Pull the socket lever up to release the processor pins from the socket holes an pull out the p...

  • Page 100

    Chapter 3 92 removing the hard diskette drive and floppy diskette drive 1. See “removing the housing cover” on page 86 2. See “removing a dummy link bar” on page 87 3. See “removing a link bar” on page 87 4. Turn the link bar over, and then detach the hard disk drive power connector and hard disk dr...

  • Page 101

    93 veriton 3500/5500/7500 8. Remove the four screws as shown here and then detach the floppy disk drive module from the link bar . Removing the cd-rw & dvd-rom drive 1. See “removing the housing cover” on page 86. 2. See “removing the front panel” on page 86 3. See “removing a dummy link bar” on pag...

  • Page 102

    Chapter 3 94 8. Remove the two screws that hold the dvd-rw driver to the bracket frame. 9. Disconnect the dvd-rom power cable, dvd-rom ide cable, and audio cable from the dvd-rom drive, and pull out the dvd-rom drive. 10. Detach the cd-rom module and dvd-rom module from the housing. ..

  • Page 103

    95 veriton 3500/5500/7500 removing the power supply 1. See “removing the housing cover” on page 86 2. See “removing a dummy link bar” on page 87 3. See “removing a link bar” on page 87 4. Disconnect the fdd power connector from the fdd drive and the hdd power connector from the hdd.. 5. Disconnect t...

  • Page 104

    Chapter 3 96 3. Disconnect the power led, hard disk drive activity led and network activity cables from the main board. Removing power switch cable 1. See “removing the housing cover” on page 86 2. See “removing the front panel” on page 86 3. Remove the power switch cable from the main board and rel...

  • Page 105

    97 veriton 3500/5500/7500 removing the system main board 1. See “removing the housing cover” on page 86 2. See “removing a dummy link bar” on page 87 3. See “removing the agp vga card” on page 88 4. See “removing the modem card” on page 88 5. Before you remove the system main board, make sure that a...

  • Page 106

    Chapter 3 98 veriton 7500/ 7500g disassembly procedure flowchart the flowchart on the succeeding page gives you a graphical representation on the entire disassembly sequence and instructs you on the components that need to be removed during servicing. Note: there is no agp vga slot for veriton 7500....

  • Page 107

    99 veriton 3500/5500/7500 disassembling the veriton 7500/ 7500g opening the housing this section tells you how to open the housing cover when you need to install additional components inside the system unit. Caution: before you proceed, make sure that you have turned off the system and all periphera...

  • Page 108

    Chapter 3 100 removing the modem card 1. See “removing the housing” on page 99. (remove the left panel only) 2. Remove the screw on the bracket of the modem card. Set the screw aside, you will need it when reinserting the modem card . Removing the agp vga card 1. See “removing the housing” on page 9...

  • Page 109

    101 veriton 3500/5500/7500 removing the usb/ audio board 1. See “removing the housing” on page 99 2. See “removing the front panel” on page 99 3. See “removing the modem card” on page 100 4. Disconnect the memory stick cable and usb cable from the main board 5. Disconnect the memory stick cable and ...

  • Page 110

    Chapter 3 102 removing the dvd-rom and cd-rw drive 1. See “removing the housing” on page 99. 2. See “removing the front panel” on page 99 3. Disconnect the optical drive ide cable and audio cable from the main board.. 4. Remove the four screws holding the cd-rw drive to the housing . 5. Disconnect t...

  • Page 111

    103 veriton 3500/5500/7500 6. Remove the four screws holding dvd-rom to the housing . 7. Disconnect the dvd-rom power cable, dvd-rom ide cable, and audio cable from the dvd-rom, then remove the dvd-rom drive from the housing . Removing the floppy disk drive 1. See “removing the housing” on page 99. ...

  • Page 112

    Chapter 3 104 3. Disconnect the floppy disk drive cable and the floppy disk drive power connector, then remove the diskette drive from the housing . Removing the hard disk drive 1. See “removing the housing” on page 99. (remove the left panel only) 2. Disconnect the hard disk drive ide cable from th...

  • Page 113

    105 veriton 3500/5500/7500 removing a dimm 1. See “removing the housing” on page 99. (remove the left panel only) 2. Press the levers on both sides of the dimm socket outward to release the dimm, and then gently pull the dimm out to remove it . Removing the cpu fan sink 1. See “removing the housing”...

  • Page 114

    Chapter 3 106 removing and installing the processor 1. See “removing the housing” on page 99. (remove the left panel only) 2. See “removing the cpu fan sink” on page 105. 3. Pull the socket lever up to release the processor pins from the socket holes an pull out the processor from the socket.. 4. Be...

  • Page 115

    107 veriton 3500/5500/7500 removing the power supply 1. See “removing the housing” on page 99. (remove the left panel only) 2. Disconnect the fdd power connector from the fdd drive and the hdd power connector from the hdd. 3. Disconnect the cd-rw power connector from the cd-rw drive and dvd-rom powe...

  • Page 116

    Chapter 3 108 removing the main board 1. See “removing the housing” on page 99. (remove the left panel only) 2. Put the housing to lying position with the open area facing upward. 3. See “removing the agp vga card” on page 100 4. See “removing the modem card” on page 100 5. Before you remove the sys...

  • Page 117

    109 veriton 3500/5500/7500

  • Page 118: Troubleshooting

    Chapter 4 110 this chapter provides troubleshooting information for the veriton 3500/5500/7500, and the veriton 3500g/ 5500g/7500g ! Power-on self-test (post) ! Index of error message ! Index of error symptoms ! Undetermined problems chapter 4 troubleshooting.

  • Page 119: Power-On Self-Test (Post)

    111 veriton 3500/5500/7500 power-on self-test (post) each time you turn on the system, the power-on self test (post) is initiated. Several items are tested during post, but is for the most part transparent to the user. The power-on self test (post) is a bios procedure that boots the system, initiali...

  • Page 120

    Chapter 4 112 04h reserved 05h 1. Blank out screen 2. Clear cmos error flag 06h reserved 07h 1. Clear 8042 interfac 2. Initialize 8042 self-test 08h 1. Test special keyboard controller for winbond 977 series super i/o chips. 2. Enable keyboard interface. 09h reserved 0ah 1. Disable ps/2 mouse interf...

  • Page 121

    113 veriton 3500/5500/7500 23h 1. Check validity of rtc value: e.G. A value of 5ah is an invalid value for rtc minute. 2. Load cmos settings into bios stack. If cmos checksum fails, use default value instead. 3. Prepare bios resource map for pci & pnp use. If escd is valid, take into consideration o...

  • Page 122

    Chapter 4 114 43h test 8259 functionality 44h reserved 45h reserved 46h reserved 47h initialize eisa slot 48h reserved 49h 1. Calculate total memory by testing the last double word of each 64k page. 2. Program writes allocation for amd k5 cpu 4ah reserved 4bh reserved 4ch reserved 4dh reserved 4eh 1...

  • Page 123

    115 veriton 3500/5500/7500 67h prepare memory size information for function call: int 15h ax=e820h 68h reserved 69h turn on l2 cach 6ah reserved 6bh program chipset registers according to items described in setup& auto-configuration table. 6ch reserved 6dh 1. Assign resources to all isa pnp devices....

  • Page 124

    Chapter 4 116 85h 1. Usb final initialization 2. Net pc: build sysid structure 3. Switch screen back to text mode. 4. Set up acpi table at top of memory. 5. Invoke isa adapter roms. 6. Assign irqs to pci devices 7. Initialize apm 8. Clear noise of irqs/ 86h reserved 87h reserved 88h reserved 89h res...

  • Page 125: Post Error Messages List

    117 veriton 3500/5500/7500 post error messages list if you cannot run the diagnostics program tests but did receive a post error message, use “post error messages list” to diagnose system problems. If you did not receive any error message, look for a description of your error symptoms in “error symp...

  • Page 126

    Chapter 4 118 memory test: this message displays during a full memory test, counting down the memory areas being tested. Memory test fail if post detects an error during memory testing, additional information appears giving specifics about the type and location of the memory error. Override enabled ...

  • Page 127: Error Symptoms List

    119 veriton 3500/5500/7500 error symptoms list note: to diagnose a problem, first find the error symptom in the left column. If directed to a check procedure, replace the fru indicated in the check procedure. If no check procedure is indicated, the first action/ fru listed in right column is the mos...

  • Page 128

    Chapter 4 120 diskette drive led comes on for more than 2 minutes when reading data. 1. Diskette 2. Diskette drive connection/cable 3. Diskette drive 4. Main board diskette drive led fails to light, and the drive is unable to access for more than 2 minutes. 1. Diskette 2. Diskette drive power 3. Dis...

  • Page 129

    121 veriton 3500/5500/7500 audio audio software program invokes but no sound comes from speakers. 1. Speaker power/connection/cable. Modem modem ring cannot wake up system from suspend mode. 1. For the external modem, make sure power on by ring in bios setup or power management is set to enabled. Fo...

  • Page 130

    Chapter 4 122 parallel/serial ports execute “load bios default settings” in bios setup to confirm ports presence before diagnosing any parallel/serial ports problems. Serial or parallel port loop-back test failed. 1. Make sure that the lpt# or com# you test is the same as the setting in bios setup. ...

  • Page 131: Undetermined Problems

    123 veriton 3500/5500/7500 undetermined problems if an error message is present, go to “post error messages list” on page 117. If you did not receive any messages, if the symptom is listed in “or “error symptoms list” on page 119 . If you still cannot solve the problem, continue with this check: 1. ...

  • Page 132: Jumpers And Connectors

    Chapter 5 124 jumpers and connectors refer to the following figure for the location of the jumpers and connectors on the main board: jumper and connector information chapter 5.

  • Page 133

    125 veriton 3500/5500/7500 main board (3500/ 5500/ 7500)(s88m/gl) cn2 cn3 cn8 cn10 cn14 cn18 cn6 cn11 cn4 cn7 dimm 2 dimm 1 fn1 u8 fn2 u14 cn16 cn17 cn21 cn25 cn19 jp2 cn20 cn22 cn24 u21 cn9 cn12 cn13 bt1 u24 cn23 cn26 sl1 sl2 sl3 u3.

  • Page 134

    Chapter 5 126 main board (3500g/ 5500g/ 7500g)(s88m/g) cn2 cn3 cn8 cn10 cn14 cn18 cn6 cn11 cn4 cn7 dimm 2 dimm 1 fn1 u8 fn2 u14 sl t1 cn16 cn17 cn21 cn25 cn19 jp2 cn20 cn22 cn24 u21 cn9 cn12 cn13 bt1 u24 cn23 cn26 sl1 sl2 sl3 u3.

  • Page 135

    127 veriton 3500/5500/7500 connector description note: there is no agp vga slot for s88m/gl. Note: *: intel 845 gl (veriton 3500/ 5500/ 7500); intel 845g (veriton 3500g/ 5500g/ 7500g) jumper setting note: *: default settings. Label component label component cn6 game port sl2 pci slot 2 cn9 fdd conne...

  • Page 136

    Chapter 6 128 this chapter gives you the fru (field replaceable unit) listing in global configurations of veriton 3500/ 3500g, 5500/ 5500g, 7500/ 7500g. Refer to this chapter whenever ordering for parts to repair or for rma (return merchandise authorization). Important: please note when ordering fru...

  • Page 137

    129 veriton 3500/5500/7500 veriton 3500/ 3500g exploded diagram picture no. Part name description floppy disk drive 3 fdd 1.44m mitsumi/d353m3d fdd 1.44mb 1"h mitsumi/d353m3 battery.

  • Page 138

    Chapter 6 130 ns rtc battery li 3v 200mah battery li 3v cr2032 200mah cable ns ide cable 40pin 2c 300m c.A.40p 2c 300mm hdd h34 8 fdd cable 34/34pin 280mm h34 c.A.34/34p fdd 280mm h34 1-10 hdd led cable 4pin 500mm lx-45 w.A 4p/hdd led 500mm lx-45 1-12 power led cable 3pin 500mm lx- 45 w.A 3p/pwr led...

  • Page 139

    131 veriton 3500/5500/7500 1-8 micro switch cable 2pin 500mm h34 c.A.2p micro sw 500mm h34 ns audio cable 4pin 2connector 520m w.A 4p 2c audio 520mm h61 1-9 power switch cable 2pin 500m lx-45 w.A 2p/pwr sw 500mm lx-45 1-11 turbo led cable 2pin 500mm lx-45 w.A 2p/turbo led 500mm lx-45 ns audio board ...

  • Page 140

    Chapter 6 132 board ns audio/usb board s88m daughter board power supply ns power supply 160w aopen fsp160-60sav v.1 sps 160wnopfc fsp160-60sav v.1 case/cover/bracket assembly 1-6 upper case secc h34a assembly upper case secc h34a ns lower case w/o led cable,swich cable,micro switch cable assembly lo...

  • Page 141

    133 veriton 3500/5500/7500 1-5 i/o pport bracket w/ label assy. I/o bracket miscellaneous 7 foot stand assy foot stand abs 501 h34 ns i/o port label label i/o port 40.7x155 h34a-s88m screws ns screw screw hdd flat 6#32 l9.8m h34 ns screw screw mach bdg #6-32*l8 ni 5 1-3 screw scrw tap hex zinc m3*.5...

  • Page 142

    Chapter 6 134 ns screw scrw tap pan m3*8l 2lead picture no. Part name description.

  • Page 143

    135 veriton 3500/5500/7500 veriton 5500/ 5500g exploded diagram picture no. Part name description floppy disk drive 8 fdd 1.44m mitsumi/d353m3d fdd 1.44mb 1"h mitsumi/d353m3 battery.

  • Page 144

    Chapter 6 136 ns rtc battery li 3v 200mah battery li 3v cr2032 200mah cable ns ide cable 40pin 3connector 150+300m c.A 40p 3c 150+300mm ide h61 9 fdd cable 34pin 2connector 450m c.A 34p 2c 450mm fdd h61 ns ide cable 40pin 3connector 150+300mm ata66 c.A 40p 3c 150+300mm ata66 h61 ns audio cable 4pin ...

  • Page 145

    137 veriton 3500/5500/7500 1-13 intrusion alert micro switch cable assy micro/sw cable h4 vt5100 1-12 led cable module turbo/hdd/ power assembly led cable (a) h40 ns audio board cable 2connector 10pin 380mm w.A 2c 10p audio bd 385mm s88m ns usb cable 2connector 10pin 300m c.A 2conn usb/10p 300mm s88...

  • Page 146

    Chapter 6 138 power supply 3 power supply 200w delta dps- 200pb-112a 01 sps 200w pfc dps-200pb-112a 01 case/cover/bracket assembly 1-9 upper case assy upper case h40 1-10 lower case w/o led cable,switch cable,micro switch cable assy l case h40 1-5 empty cover 5.25" 5.25" empty cover h40 veriton 1-4 ...

  • Page 147

    139 veriton 3500/5500/7500 ns i/o port bracket w/o label assy port bracket(s88m) h80 miscellaneous ns name plate vt550 lbl name plt49.6*9.6vt5500 h40 ns i/o port label lbl i/o port 40.7x155 h34a-s88m screws 1-14 screw screw tap hex znic #6-32*4/16" ns screw screw mach bdg #6-32*l8 ni ns screw scrw m...

  • Page 148

    Chapter 6 140 4 1-14 screw screw tap hex znic #6-32*4/16" 1-15 screw scrw mach flat m3*0.5p*8l ni picture no. Part name description.

  • Page 149

    141 veriton 3500/5500/7500 veriton 7500/ 7500g exploded diagram picture no. Part name description floppy disk drive 2 fdd 1.44m mitsumi/d353m3d fdd 1.44mb 1"h mitsumi/d353m3 battery.

  • Page 150

    Chapter 6 142 ns rtc battery 3v 200mah battery li 3v cr2032 200mah cable ns ide cable 40pin 3connector 150+300m c.A 40p 3c 150+300mm ide h61 4 fdd cable 34pin 2connector 350m c.A 34p 2c 350mm fdd m19a/fu ns ide cable 40pin 3connector 150+300mm ata66 c.A 40p 3c 150+300mm ata66 h61 ns audio cable 4pin...

  • Page 151

    143 veriton 3500/5500/7500 1-15 intrusion alert micro switch cable 2pin 500mm w.A. 2p alarm sw 500mm cable 2 1-8 led cable module power led/ turbo led/hdd led/power switch assy hld lx45 ns audio board cable 10pin 385mm w.A 2c 10p audio bd 385mm s88m ns usb cable 2connector 10pin 300m c.A 2conn usb/1...

  • Page 152

    Chapter 6 144 power supply ns power supply 200w delta dps- 200pb-112b 01 sps 200w pfc dps-200pb-112b 01 case/cover/bracket assembly 1-1 right door cvr r secc t-.8 lx45 1-2 left cover cvr l secc t-.8 h80 1-7 front bezel assy bzl vertion new logo h80 1-6 lower case w/top cover,mainboard tray,usb holde...

  • Page 153

    145 veriton 3500/5500/7500 ns name plate vt750 lbl name plt49.6*9.6vt7500 h80 ns rubber foot rubber foot t-6.8 idb ns i/o port label lbl i/o port 40.7x155 h34a-88m screws ns screw scrw hex i#4-40/o#4-40 l7.5 ni 1-17 screw scrw mach pan m2*10l ns screw scrw mach bdg #6-32*3/16" ni 1-10 screw scrw mac...

  • Page 154

    Chapter 6 146 9 1-18 screw scrw tap hex zinc m3*.5*5 8 1-9 screw screw tap hex znic #6-32*4/16" picture no. Part name description.

  • Page 155: Veriton 3500/5500/7500

    Appendix a 147 veriton 3500/5500/7500 1. Brand no: s88m/ gl mb 2. Project name/ code: s88m / 91.31v01.301(veriton 3500) s88m/ 91.31v01.201(veriton 5500) s88m/ 91.31v01.101(veriton 7500) 3. Description s88m/gl is positioned to be the first main board product that supports the latest intel chipset bro...

  • Page 156: Veriton 3500G/5500G/7500G

    148 veriton 3500/5500/7500 veriton 3500g/5500g/7500g 1. Brand no: s88m/ g mb 2. Project name/ code: s88m 91.31v01.301(veriton 3500g) s88m 91.31v01.201(veriton 5500g) s88m 91.31v01.101(veriton 7500g) 3. Description s88m/ g is positioned to be the first main board product that supports the latest inte...

  • Page 157: Main Features

    Appendix a 149 main features ! Single intel pentium 4/ northwood processor configurations at 400/ 533mhz for s88m/ g and at 400mhz for s88m/ gl. ! Agtl+ host bus with integrated termination supporting 32 bit host addressing ! Up to 2 gb (w/ 512mb technology) of ddr (double data rate) dimm module at ...

  • Page 158: Test Compatible Component

    Appendix b 150 this computer’s compatibility is a test plan released by acer internal testing department. Once the final report is available, this chapter will be revised accordingly. Test compatible component appendix b.

  • Page 159

    151 veriton 3500/5500/7500 microsoft windows xp professional environment test item specifications processor intel willamette 1.7g/1.8g/1.9g/2.0 socket 478 intel northwood 2.0g/2.2g/2.4g memory micron ddr 266, 128mb, 0.18u 16mx8x8 cl2.5 micron ddr 266, 256mb, 0.18u 16mx8x16 cl2.5 infineon ddr 266 128...

  • Page 160

    Appendix b 152 vga adapter leadtek geforce 2 mx-400 64m lp prolink geforce 2 mx-400 64m lp ecs sis 315e ecs sis 315e lb speake charming standard v-1 charming speake 2.1 channel philips a201s lan adapter 3com lan card, 10/100 mbps lan card, 10/100 mbps lb wireless lan adapter zcom pci 802.11 card fax...

  • Page 161

    153 veriton 3500/5500/7500 microsoft windows me professional environment test item specification processor intel willamette 1.7g/1.8g/1.9g/2.0 socket 478 intel northwood 2.0g/2.2g/2.4g/2.53g socket 47 intel pentium iv celeron 1.8g memory micron ddr 266, 128mb, 0.18u 16mx8x8 cl2.5 micron ddr 266, 256...

  • Page 162

    Appendix b 154 speake charming standard v-1 charming speake 2.1 channel lan adapter 3com lan card, 10/100 mbps lan card, 10/100 mbps lb fax/modem adapter ambit v92, 56k, hsfi v92, 6k, hsfi, lb askey v92, 56k, hsfi askey v92, 56k, hsfi, lb power supply delta 200w pfc delta 200w non pf delta 180w non ...

  • Page 163

    155 veriton 3500/5500/7500 microsoft windows 2000 professional environment test item specifications processor intel willamette 1.7g/1.8g/1.9g/2.0 socket 478 intel northwood 2.0g/2.2g/2.4g/2.53g socket 478 intel pentium iv celeron 1.8g memory micron ddr 266, 128mb, 0.18u 16mx8x8 cl2.5 micron ddr 266,...

  • Page 164

    Appendix b 156 speake charming standard v-1 charming speake 2.1 channel lan adapter 3com lan card, 10/100 mbps lan card, 10/100 mbps lb fax/modem adapter ambit v92, 56k, hsfi v92, 6k, hsfi, lb askey v92, 56k, hsfi askey v92, 56k, hsfi, lb power supply delta 200w pfc delta 200w non pfc delta 180w non...

  • Page 165

    157 veriton 3500/5500/7500 linux red hat environment test item specifications processor intel willamette 1.7g/1.8g/1.9g/2.0 socket 478 intel northwood 2.0g/2.2g/2.4g/2.53g socket 478 intel pentium iv celeron 1.8g memory micron ddr 266, 128mb, 0.18u 16mx8x8 cl2.5 micron ddr 266, 256mb, 0.18u 16mx8x16...

  • Page 166

    Appendix b 158 speake charming standard v-1 charming speake 2.1 channel lan adapter 3com lan card, 10/100 mbps lan card, 10/100 mbps lb fax/modem adapter ambit v92, 56k, hsfi v92, 6k, hsfi, lb askey v92, 56k, hsfi askey v92, 56k, hsfi, lb power supply delta 200w pfc delta 200w non pfc delta 180w non...

  • Page 167

    159 veriton 3500/5500/7500

  • Page 168: Online Support Information

    Appendix c 160 this section describes online technical support services available to help you repair your acer systems. If you are a distributor, dealer, asp or tpm, please refer your technical queries to your local acer branch office. Acer branch offices and regional business units may access our w...

  • Page 169

    161 veriton 3500/5500/7500

  • Page 170

    Index 162 a assignment map 30 audio controller 26 audio interface 26 audio-in/line-in port 11, 15 audio-out/line-out port 11, 15 b basic level 37 bios setup 36 entering setup 37 setup utility 37 bios utility disk drives 39 exiting setup 61 load default settings 60 power management 48 product informa...

  • Page 171

    163 index idsel 30 interface audio 26 ide 26 video 25 irq assignment map 31 j jumper and connector information 124 jumpers 124 k keyboard 21 l linux red hat environment test 157 load default settings 60 m machine disassembly 70 cover 73 housing cover 73 main board 125, 126 removing 108 main board la...

  • Page 172

    Index 164 audio 121 cd/dvd-rom drive 120 diskette drive 119 keyboard 122 memory 119 modem 121 monitor 121 other 122 parallel port 122 power supply 122 processor / processor fan 119 real-time clock 120 serial port 122 system board 119 video 121 system 36 system board removing 108 system memory 81, 10...

  • Page 173

    165 index.