User guide compressor model number: as18-2 1 year warranty after sales support uk/n.Ireland helpline n o : website: email: 01270 508530 www.Airbrushheaven.Co.Uk enquiries@airbrushheaven.Co.Uk.
Contents 1. Welcome section 2. General information & safety instructions 3. Contents & features 4. Parts & assembly 5. General maintenance 6. Using the airbrush 7. Specifications 7. Trouble shooting after sales support uk/n.Ireland helpline n o : website: email: 01270 508530 www.Airbrushheaven.Co.Uk...
Welcome congratulations! You have made an excellent choice with the purchase of this quality airbrush heaven product. By doing so you now have the assurance and peace of mind which comes from purchasing a product that has been manufactured to the highest standards of performance and safety, supporte...
General information & safety instructions • industrial applications must follow osha requirements. • maintain a safe working environment. Keep the work area well lit and make sure there is adequate work space. • use the product only in a well ventilated area with an ambient temperature of between 5 ...
Contents 1 x single cylinder piston compressor 1 x pressure regulator with gauge and water release valve 1 x 3m air hose 1 x 3 way adaptor 1 x compressor mounted twin airbrush holder 1 x 1/8th to 5mm hose adaptor 1 x 1/4” to 1/8” hose adaptor features • auto pressure restart (47psi/3bar) • auto pres...
Parts & assembly 4 after sales support uk/n.Ireland helpline n o : website: email: 01270 508530 www.Airbrushheaven.Co.Uk enquiries@airbrushheaven.Co.Uk.
5 attaching the 3 way adaptor • place the female end of the 3 way adaptor to the 1/8” connector on the regulator valve and turn till tight by hand. Please note: to attach additional hoses please remove the end caps. Using more than one airbrush simultaneously will lower the output pressure from the ...
6 using the compressor with an airbrush • connect the compressor to a mains outlet. • check the 3 way adaptor outlets are screwed on air tight. • attach the air hose to the compressor. • attach the airbrush to the other end of the air hose. • turn on the compressor. • set air pressure to 2-40 psi on...
• single cylinder piston compressor • 1/6hp • 1450/1700 rpm • 20-23 l/min airflow • 0-57psi maximum pressure • 3.6kg total weight • 275mm x 140mm x 220mm overall dimensions specifications 7 trouble shooting problem no air compressor always on air pressure too low or high cause not connected to mains...
Warranty this product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion, solely at our option with no ...
Warranty card compressor please keep your purchase receipt/invoice together with your warranty card fault description: name: address: date of purchase: location of purchase: we recommend that you attach a photocopy of your receipt/invoice, showing the date of purchase, to this warranty card and keep...
For further help, advice and video demonstrations please visit: www.Airbrushheaven.Co.Uk.
