User guide airbrush model number: bd-116c 1 year warranty after sales support uk/n.Ireland helpline n o : website: email: 01270 508530 www.Airbrushheaven.Co.Uk enquiries@airbrushheaven.Co.Uk.
Contents 1. Welcome section 2. General information & safety instructions 3. Contents & features 4. Parts & assembly 4. Changing the needle 5. General maintenance 6. Using the airbrush 7. Specifications 7. Trouble shooting after sales support uk/n.Ireland helpline n o : website: email: 01270 508530 w...
Welcome congratulations! You have made an excellent choice with the purchase of this quality airbrush heaven product. By doing so you now have the assurance and peace of mind which comes from purchasing a product that has been manufactured to the highest standards of performance and safety, supporte...
General information & safety instructions • industrial applications must follow osha requirements. • maintain a safe working environment. Keep the work area well lit and make sure there is adequate work space. • use the product only in a well ventilated area. • check for damaged parts including hose...
Contents 1 x single action airbrush 3 x nozzles (0.3mm, 0.5mm & 0.8mm) 3 x needles (0.3mm, 0.5mm & 0.8mm) 1 x 2cc metal reservoir cup 1 x 5cc metal reservoir cup & cap 1 x 13cc metal reservoir cup & cap 1 x hose 1 x hose adaptor ring 2 x hose connectors 1 x nozzle spanner 1 x fitted protective case ...
25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. Parts & assembly 4 screw for valve spring valve spindle hex nut holder trigger trigger bolt colour cup 2cc colour cup 13cc cup cover colour cup 5cc needle after sales support uk/n.Ireland helpline n o : website: email: 01270 508530 www.Airbrushheaven.C...
5 storage • always disconnect the airbrush from its air supply source before any maintenance on the airbrush body. • when not in use, tools and equipment should be kept in a dry location to inhibit rust. Basic cleaning • empty the reservoir cup or jar of used medium. • remove and wipe clean the rese...
6 setting up & using the airbrush • attach the hose to the compressor. (we recommend our as-18a or as-186 compressor for this model) • set air pressure to 2-40 psi on the compressor. • remove the protection cap from the airbrush. • add your chosen medium to the reservoir cup. • press down on the tri...
• single action trigger • 3, 5 & 13cc metal reservoir cups • 0.3, 0.5 & 0.8mm fluid nozzle • 50 psi maximum • 1/8th” bsp (9mm) & 5mm screw connectors specifications 7 trouble shooting problem medium leaking. Poor medium atomization. Air bubble(s) in the cup. Medium leaks from back. Air leaking mediu...
Warranty this product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion, solely at our option with no ...
Warranty card airbrush please keep your purchase receipt/invoice together with your warranty card fault description: name: address: date of purchase: location of purchase: service helpline we recommend that you attach a photocopy of your receipt/invoice, showing the date of purchase, to this warrant...
For further help, advice and video demonstrations please visit: www.Airbrushheaven.Co.Uk.
