Ventilation products aircycler® frv installation & user’s guide ventilation made breezy!™ a breeze to install • a breeze to use.
2 w w w . A i r c y c l e r . C o m 4.50 in. 11.5 cm 3.50 in. 9 cm 1.30 in. 3.4 cm introduction the aircycler® is a digital programmable furnace fan timer. By oper - ating the furnace fan periodically, the aircycler® improves indoor air quality and thermal comfort by circulating and filtering indoor...
3 w w w . A i r c y c l e r . C o m installation considerations the aircycler® model does not require batteries. It does require 24 vac (r and c terminals) to be connected for proper operation. The aircycler will not operate without these two connections. The wires (r, c, w & y ) from the air handle...
4 w w w . A i r c y c l e r . C o m installation instructions 1.0 controller location the aircycler® can be installed anywhere in your home. It can be installed near a thermostat or out of view on/near the air handler unit. The wiring configuration is flexible. Warning: before installing the aircycl...
5 w w w . A i r c y c l e r . C o m 3.1 configure fan on time press the mode key once to enter the menu mode. Fan on will flash on the display. 1. Use the increase or decrease keys to change the fan on time from 1 - 199 minutes or to select unlimited on time (un). Un allows the fan to operate contin...
6 w w w . A i r c y c l e r . C o m 4.0 operating mode if the thermostat activates heating, cooling, or constant fan operation, the numeric display will read on. Otherwise, the display will read fan off and will indicate the time remaining until the fan is activated again. Once activated, the displa...
7 w w w . A i r c y c l e r . C o m 5.0 troubleshooting problem: blank display on the aircycler® solution check: 1. Confirm that the furnace has power. 2. Verify that the thermostat is operational. 3. Check that furnace will call for heat from the thermostat. 4. Ensure that fan operates with a fan-o...
