AireRyder FN52307 Manual

Summary of FN52307

  • Page 1

    Model no.: fn52307 aireryder original ceiling fan limited lifetime warranty the limited lifetime warranty covers this ceiling fan, for residential use by the original purchaser, against defects in material or workmanship as follows: if your aireryder ceiling fan motor fails at any time during the li...

  • Page 2

    Unpack your fan and check the contents. You should have the following items. 1.) hanger bracket 2.) canopy 3.) downrod stand cover 4.) downrod set(included hanger ball,6 in.Downrod,hanger pin & lock pin) 5.) fan fixture set 6.) blade holder (x5) 7.) fan blade(x5) 8.) switch box 9.) assembly kit a. 1...

  • Page 3: Exploded View Detail

    Hanger bracket canopy downrod downrod stand cover hanger ball hanger pin blade holder collar lock pin housing switch box blade downrod mount slope ceiling mount (up to 23 degrees) exploded view detail triple mount drawing f a n c o 100111.

  • Page 4

    Safety instructions read all safety information and installation instructions before you begin installing the fan. Save instructions. All set screws of the fan must be checked and retightened where necessary before installation. To reduce the risk of personal injury , do not bend the blade brackets ...

  • Page 5: Installation Instructions

    Fig.5 hanger pin motor wires thread the motor wires through the canopy, downrod stand cover and downrod. Page: 1 / 3 installation steps : hanger pin lock pin installation instructions important: before you begin installing the fan, carefully read all information on the separate sheet "safety instruc...

  • Page 6

    Tighten blades to blade holders by using blade screws and washers. Note: before installing blade holders to the motor, please remove the plastic inserts page: 2 / 3 secure blade holders to the motor with motor screws and washers. Assembly without fan light make sure the lead wire of fan light in swi...

  • Page 7

    Trouble shooting guide if you have dif ficulty operating your new ceiling fan, it may be the result of incorrect assembly , installation or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check this trouble shooting guide. If a probl...

  • Page 8: Dynamic Blade Balancing Kit

    Dynamic blade balancing kit your ceiling fan may sometimes have wobbling problems when operating due to irregularity in the blades or the blade holders. Also, improper assembly in the mounting system or crooked bearings may cause some additional problems. This balancing kit can be used to fix wobbli...