- DL manuals
- Airflow
- Fan
- QT 150VS
- Installation And Operating Instructions Manual
Airflow QT 150VS Installation And Operating Instructions Manual
Summary of QT 150VS
Page 1
Installation and operating instructions quietair 150mm axial fan model:qt 150vs –variable speed fan (50 - 260m 3 /hr) with adjustable timer control • variable speed with timer • low energy • quiet • long life • extra safe 80000309 issue 1 02/15.
Page 2
Contents chapter 1. General installation- and operation instructions 1.0 important information 1.1 warnings 1.2 safety instructions 1.3 warranty claims – disclaimer 1.4 regulations - guidelines 1.5 transport 1.6 acceptance of delivery 1.7 storage 1.8 operational area 1.9 performance data 1.10 noise ...
Page 3
Chapter 1 general safety instructions 1.0 important information to ensure a proper function and your own safety manual should be thoroughly read and observed. This document is part of the product and has to be available and durable at all times to ensure a safe operation of the fan. All equipment-re...
Page 4
Ensure a uniform inflow and free outlet! During operation of a fire place in ventilated room, sufficient air supply must be provided in all operating conditions (please contact chimney sweep). Valid local regulations and laws must be observed! Quietair 150 vs is not to be used by children and person...
Page 5
1.8 operational area - appropriate use: quietair 150 fans are used to convey normal or slightly dusty (particles size µm), little aggressive and humid air, into moderate climate and suitable area of its performance curve (see airflow developments sales documents / internet). Operation permitted only...
Page 6
2.2 motor protection quietair 150 fans use an energy-saving maintenance-free ec motor with high efficiency. The motor is equipped with a thermal contact, wired in series, which automatically switching on/off after cooling. If the motor is blocked than attempt to restart it every 3 seconds. 2.3 start...
Page 7
3.3 dimensions chapter 4 function 4.0 function description all of the following information and instructions are intended for use by authorized electricians. All times may vary slightly due to component tolerances and ambient temperatures. Quietair qt150 vs can be continuously operated by e.G. Conne...
Page 8
Chapter 5 cleaning / deinstallation 5.0 cleaning safety instructions listed in chapter 1.2 must be observed! - before cleaning always ensure that the fan unit is isolated from the power supply and secured against restarting! - clean facade, protective guard and visible housing parts (the external ho...
Page 9
All of the following information and instructions are only for authorized electricians. Chapter 6 installation 6.0 scope of delivery / mechanical installation a visual inspection upon delivery should be performed including a check to ensure all components are present. Take the delivery unit out of t...
Page 10
2. Boreholes position the housing, then mark and drill the holes and mount it with at least two fastening screws and wall plugs. 3. Backdraft shutter and guide vane - if required backdraft shutter (scope of delivery) can be installed behind the guide vane (fig 6). - during the housing installation, ...
Page 11
6.3 electrical installation/commissioning safety instructions listed in chapter 1.2 must be observed - all electrical installation to be carried out by an approved electrician in accordance with presented manual and wiring diagrams. - the relevant standards, safety regulations (for instance din vde ...
Page 12
- cable entry nym-o (on the bottom left) - cable entry liyy (on the top right) rotated mounting positions must be observed! - relay with 230v-consumers - connection combined with supply cable through nym-o 4×1.5mm 2 - relays with low voltage consumers - connection combined with control line through ...
Page 13
6.5 mounting 6.6 operation safety instructions listed in chapter 1.2 must be observed! To guarantee the proper function of the fan, the following need to be checked regularly: - appearance of dust or dirt in the housing (on the motor and impeller) - free running of the impeller - appearance of exces...
Page 14
Chapter 7 installer function 7.0 function description quietair qt150 vs quietair qt150 vs can be continuously operated by e.G. Connecting a 3 amp- stepless speed controller (accessory) or 0-10 v set point generator. The control board is on terminal 7 where a potentiometer supply of +10 v is availabl...
Page 15
2.1 speed setting / adjustment by using a potentiometer p3 and p4, the adjustment range of the speed is limited internally. P3 = minimum speed, supply turn to left stop = 20% p4 = maximum speeed, supply turn to right stop = 100% as a result of factory settings the entire range of the control spectru...
Page 16
At a scaling value on potentiometer 1, which exceeds the value of potentiometer 2, the fan runs at the minimum speed. Note: minimum air operation and minimum rate of air can be achieved by electronic temperature sensors, such as the etr-type (see accessories). 4. Relay output an operating message wi...
Page 17
5. Schematic overview for quietair qt150 vs fig 17.
Page 18
Chapter 8 care and maintenance 8.0 care and maintenance safety instructions listed in chapter 1.2 must be observed! - prior to all work always ensure that the fan unit is isolated from the power supply and secured against restarting! - in principle the devices are maintenance-free; the unit is not u...
Page 19
8.2 decommissioning and disposal safety instructions listed in chapter 1.2 must be observed! During transportation safety instructions listed in chapter 1.4 must be observed. Parts and components of the fan which have reached the end of their lifespan, for instance because of the wear, corrosion, me...
Page 20
Warranty: applicable to units installed and used in the united kingdom. Airflow ’s warranty covers the quietair fan for two years. The warranty can be upgraded to three years from date of purchase against faulty material or workmanship by registering on our web site at www.Airflow.Com. The warranty ...