AIRIS KIRA Series User Manual - Resetting The System

29 

Beeping 

accelerates 

Battery Low Low:  Indicates that there is 1 to 2 

minutes of battery charge remaining.  Save your 

work and turn off the notebook, or connect the AC 

adapter. 

When there is only one minute of battery charge remaining, the 

notebook will suspend to the HDD and power off.  You should 

connect AC power and resume to save your work. 

Small Battery for the Real Time Clock 

There is a small built-in battery pack that supplies power to the 

system in order to maintain certain system information while the 

power is off.   

If the notebook is left without a power source for long period of 

time, this battery will be exhausted and system information will be 

lost.   

Danger of explosion if battery is 

incorrectly replaced. Replace only with the same or equivalent 

type recommended by the manufacturer.  

Dispose of used batteries according to the manufacturer's 

instructions.  Never remove the battery pack while the power 

is on as this may result in data loss when the system loses 

power. 

Resetting the System 

After installing a software application package, you may be 

prompted to reset the system to load the changed operating 

environment.  

To reset the system, or “reboot,” press the [Ctrl]+[Alt]+[Delete] 

keys simultaneously. This is known as “warm boot.” This key 

combination acts as “software” reset switch when you encounter 

hardware or software problems, which lock up the notebook.  

If this key combination does not shut down the notebook, you can 

reset the notebook by using the notebook’s power button. Should 

the notebook lock up for some reason, pressing this button powers 

the notebook off.