1. DL manuals
  2. Airlink101
  3. Print Server
  4. AMPS230
  5. Quick Installation Manual

Airlink101 AMPS230 Quick Installation Manual

Other manuals for AMPS230: User Manual
Manual is about: 1-Port USB 2.0 Multi-Functional Printer Server

Summary of AMPS230

  • Page 1

    Quick installation guide usb2.0 1-port multi-functional printer server model # amps230 this quick installation guide only provides basic instructions. For detailed information on using this product, please refer to the user’s manual on the supplied cd. Connecting the printer server warning: only a u...

  • Page 2: Section 2

    Step 4 turn on the printer. Once the printer is powered on, connect the print server’s power adapter to an electrical outlet. Installing the ps software note: the ps software must be installed on all computers you plan to use with the print server. Step 1 insert the utility cd into your cd-rom drive...

  • Page 3

    Note: if the autorun window does not appear automatically, go to start -> run and type d:\utility\setup.Exe (where d is the letter of your cd-rom drive) and click ok. Step 2 select your setup language and click ok. Step 3 click next at the welcome screen..

  • Page 4

    Step 4 click next at the choose destination location screen. Step 5 click next at the select program folder..

  • Page 5: Section 3

    Step 6 once the installation is complete, make sure that the launch ps-link box is checked and click finish. Configuring the printer server note: the following steps only need to be performed one time from one computer. Step 1 click the discover button and your printer should show up under server na...

  • Page 6

    Step 2 once the printer server appears in the server name box, click on it. You should see your printer next to device name. Click on the setup wizard button to configure the printer server. Step 3 a password box will appear. The default password is admin. Enter it and click ok..

  • Page 7

    Step 4 click next at the welcome screen. Step 5 at the system screen you can change the server name, port name, and password. Click next after making the desired changes. If you do not have a specific server name, port name, or password that you would like to use, click next to accept the default se...

  • Page 8

    Step 6 if you have a specific ip address you would like to assign to the print server, select manually assign and enter your custom settings. Otherwise, select dhcp assign automatically and click next. Step 7 if your network uses a workgroup name other than workgroup, you can enter it here, or accep...

  • Page 9

    Step 8 if you have specific appletalk settings, you can enter them here or accept the default settings, and click next. Step 9 click save to save the changes to your print server..

  • Page 10: Section 4

    Adding the printer to the computer note: the following steps must be completed on all computers you plan to use with the print server. Step 1 double click on the ps-link icon in the system tray to open the ps-link software. Step 2 click the discover button and your printer should show up under serve...

  • Page 11

    Step 3 select your print server from the server name box and click the link button. Step 4 click ok at the link successfully screen. You will see notices appearing in the bottom right-hand corner of your screen while windows configures the printer. Step 5 once you see a notice that says your new har...

  • Page 12

    Step 6 in printers and faxes (or printers) you will see a copy of your printer. Right click on the copy and click set as default printer. Congratulations, the configuration is now complete. Remember to repeat all steps in section 4 on each of the computers you plan to use with the print server. Afte...

  • Page 13: Section 5

    Technical support e-mail: support@airlink101.Com toll free: 1-888-746-3238 website: www.Airlink101.Com *printer server may not support all printers. Go to the airlink101 website to view the printer compatibility list *actual data throughput will vary. Network conditions and environmental factors low...