1. DL manuals
  2. Airlink101
  3. Wireless Router
  4. AR570WV2
  5. Quick Installation Manual

Airlink101 AR570WV2 Quick Installation Manual

Other manuals for AR570WV2: User Manual
Manual is about: Wireless N 150 Green Router

Summary of AR570WV2

  • Page 1

    Quick installation guide wireless n 150 green router model # ar570wv2 ver. 1a.

  • Page 2: Hardware Introduction

    1 before you begin the installation, please check the items in the package: • wireless n 150 green router with 1 un-detachable antenna • power adapter • setup cd • quick installation guide • ethernet cable this quick installation guide only provides basic instructions. For detailed information on us...

  • Page 3

    2 leds status description status blinking (green) device is working properly on (green) network device is connected blinking data access wan off not connected on (green) network device is connected blinking data access lan 1~4 off not connected on (green) wireless feature is enabled blinking slowly ...

  • Page 4: B. Back Panel

    3 b. Back panel item name description antennas these antennas are un-detachable 1.8dbi dipole antennas. 1 - 4 local area network (lan) ports 1 to 4. Wan wide area network (wan / internet) port. Reset press this button and hold it for 4 seconds to restore factory default settings. Pwr power connector...

  • Page 5: Configuring The Router

    4 configuring the router note: prior to connecting the router, be sure to power off your computer, dsl/cable modem, and the router. Step 1 connect one end of a network cable to the wan port of the router and connect the other end of the cable to the dsl/cable modem. Step 2 power on the modem. Step 3...

  • Page 6: Step 4

    5 step 4 plug the power adapter to the router and connect it to an electrical outlet. Step 5 power on your computer..

  • Page 7: Step 6

    6 step 6 check leds of the router: make sure status, wan, w.Lan, and the lan port that the computer is connected to are on. If one or more leds are not on, please refer to section 4 troubleshooting. Step 7 insert the setup cd into cd-rom drive. Step 8 when the autorun menu pops up, click ez setup wi...

  • Page 8: Windows 7 and Vista Users:

    7 windows 7 and vista users: an autoplay window pops up on screen. Please make sure you give permission to run the setup program by clicking run autorun.Exe. Step 9 select your language and click next..

  • Page 9: Step 10

    8 step 10 click on wizard. Step 11 please make sure your computer is connected to the one of the four lan ports of the router, and your modem is connected to the wan port of the router. Click next to configure the basic wireless settings.

  • Page 10: Step 12

    9 step 12 the default wireless encryption setting is disabled. It is suggested to select wpa2-psk for best wireless security. Step 13 configure the ssid (wireless network name, i.E. Airlink101), channel, security and key. It is suggested to select wpa2-psk for best wireless security. Enter 8~63 char...

  • Page 11: Step 14

    10 step 14 click next and the wizard will detect your wan settings, or you can select your wan type manually by checking “let me select wan service by myself”. Step 15 enter the settings based on your wan service type. Cable (dynamic ip) if you are using cable internet service, your wan type is “dyn...

  • Page 12: Dsl (Pppoe Or Dynamic Ip)

    11 dsl (pppoe or dynamic ip) for dsl users, your wan type is either pppoe or dynamic ip. You can try both types and determine which one works for you..

  • Page 13: Step 16

    12 for pppoe settings, please enter the user name and password provided by your isp (internet service provider). Note: depending on the settings provided by your isp, you may need to include the domain name with your user name. Example: username@sbcglobal.Net step 16 verify the settings you have con...

  • Page 14: Step 17

    13 step 17 click next to test the internet connection, or you can ignore the test, and just open the internet browser and verify if your computer is connected to the internet. If your computer is not connected to the internet, please go to section 4, troubleshooting..

  • Page 15: Step 18

    14 step 18 after the wan service test is completed, click finish. The wizard will open the web configuration page for the router automatically unless you uncheck “open the default web browser to access the advanced configuration”. You will see the status of the router on the web configuration page b...

  • Page 16

    15 congratulations! Your router is configured successfully..

  • Page 17: Step 1

    16 connect to the router wirelessly you must configure your wireless computer in order to establish a wireless connection to the router. In this section, you can find the instructions of how to connect to the router wirelessly with your windows 7 computer. You can also refer to the manual of your wi...

  • Page 18: Step 2

    17 step 2 enter the key you configured in step 13 if you have enabled the wireless security, then click ok. The wireless connection should be now established..

  • Page 19: Troubleshooting

    18 troubleshooting a. Diagnosing problems from led indicators: 1. If the wan led is off, but status led is on, please check if the modem is powered on, and the network cable from the modem is plugged into the wan port of the router. 2. If the wireless led is off, but status led is on, the wireless f...

  • Page 20: Step 3

    19 step 3 turn on the router and wait for the lights on the router to settle down. Step 4 turn on the computer. C. Your wireless adapter is not connected to the router: 1. Please make sure your wireless adapter is connected the router with the correct security key you configured at step 13. 2. Pleas...

  • Page 21: Technical Support

    20 technical support e-mail: support@airlink101.Com toll free: 1-888-746-3238 website: www.Airlink101.Com *theoretical maximum wireless signal rate derived from ieee standard 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of n...