Quick installation guide 16-port 10/100mbps fast ethernet switch model# asw316 ver. 1a.
1 trademarks copyright © 2009 airlink101® airlink101® is a registered trademark. All other trademarks belong to their respective proprietors. Copyright statement no part of this publication may be reproduced in any form or by any means or used to make any derivative such as translation, transformati...
2 1 introduction congratulations on your purchase of the 16-port 10/100mbps fast ethernet switch! It is an easy-to-install network switch which helps you to extend your network structure quickly and reliably. Purpose this quick installation guide tells you how to install your switch and how to conne...
3 1.2 panels 1.2.1 front panel the front panel of the switch consists of led indicators, and 16 10/100mbps ports. The figure below shows the front panel of the switch. Figure 1-1 front panel view of the switch • 10/100mbps ports (port 1~16): these ports support 10/ 100mbps, and can operate in half/f...
4 notice: do not envelop radiator fan while the switch is working. 1.2.3 led indicators information the front panel leds provide instant status feedback and help monitoring and troubleshooting when needed. Figure 1-3 front panel view of the switch • power: power indicator status led color solid blin...
5 • port 1~16 10/100m status leds status led color solid blinking off link/ act green the respective port is successfully connected to an ethernet network. The port is transmitting or receiving data on the ethernet network. No link status led color solid blinking off 10/100m green the respective por...
6 ports • 16 x 10/100mbps tx auto-negotiation rj45 port access method • csma/cd transmission method • store and forward mac address table • 8k built-in buffer • 1.25m bits data transfer rate* • ethernet: 10/20mbps – half/full-duplex • fast ethernet: 100/200mbps – half/full duplex physical and enviro...
7 performance. When installing, take the following into your consideration. 2.1 installation follow the guidelines below to install the switch: install the switch in a fairly cool and dry place. See the technical specifications for the acceptable temperature and humidity operating ranges. Install th...
8 power source automatically. 3 connecting the switch this section describes how to connect the switch to your 10/100mbps fast ethernet network. 3.1 connection your network device (i.E. Computer, switch, ip camera, voip) can be connected to any port of the switch via a two-pair category 5 cable or a...
9 4 technical support e-mail: support@airlink101.Com toll-free: 1-888-746-3238 web site: www.Airlink101.Com *actual throughput varies. Network conditions and environmental factors as well as network overhead lower actual data throughput rate. Copyright © 2009 airlink101. All rights reserved. Airlink...
