Airlink101 ATVUSB01 Quick Installation Manual - page 3
Section 2
Installing Hardware
Before you plug the Airlink101 video capture adapter into your computer’s USB 2.0 port, please check
your USB 2.0 device driver first. If your USB 2.0 host controller driver is not the latest version or provided
by Microsoft, we strongly recommend you use our “USB 2.0 Updater” utility from the autorun page on the
CD. It will help you to upgrade your USB 2.0 driver to the latest version released by Microsoft in order to
avoid some compatibility issues.
Step 1
Connect the Composite In (or S-Video In) and Audio In connectors to the
output cables of your video/audio source.
Step 2
Connect the Audio Out cable of the video capture adapter to the Line In port
of your sound card.
Step 3
Connect your speakers to the Line Out port of your sound card.
Step 4
Connect the USB 2.0 connector to the USB 2.0 port of your computer.
Note: Be sure to follow the steps carefully and plug in the USB 2.0 connector last.