Airlink101 AWLC3026T Quick Installation Manual - page 3
Manual is about: 802.11g CardBus Adapter
of
4
Section 3
Section 2
Configure the Cardbus Adapter
To open the Cardbus Adapter’s utility go to Start > (All) Programs > Airlink101
802.11g CardBus Utility > Airlink101 802.11g CardBus Utility.
Step 1
Go to the AP List tab, select the SSID (Network Name) of the wireless
network you wish to connect to, and click Connect.
Step 2
If encryption is not enabled for the selected access point / router, skip to
step 6. Otherwise, enter a Profile Name for your wireless setting and click Next.
Step 3
Verify that the Network Name matches the SSID of your wireless network
and click Next.