1. DL manuals
  2. Airlink101
  3. PCI Card
  4. AWLH3026T
  5. User Manual

Airlink101 AWLH3026T User Manual

Other manuals for AWLH3026T: Quick Installation Manual
Manual is about: Airlink101 User's Manual Network Adapter AWLH3026T

Summary of AWLH3026T

  • Page 1

    802.11g wireless pci adapter model # awlh3026t user’s manual ver. 1a.

  • Page 2

    2 table of contents 1. Introduction ................................................................................................................. 3 1.1 package contents ................................................................................................. 3 2. Installation ..............

  • Page 3: 1. Introduction

    3 1. Introduction thank you for purchasing the 802.11g wireless pci adapter. The wireless pci adapter is an advanced ieee 802.11b/g compatible, high-performance wireless card that supports data transfer speeds of up to 54 mbps. The adapter can be integrated into a network in either ad-hoc mode (with...

  • Page 4: 2. Installation

    4 2. Installation 2.1 install driver & utility this section provides instructions on how to install the airlink101 802.11g wireless pci adapter. The driver is installed along with the utility. Note: be sure to power off your computer before inserting the pci adapter. For windows 98se and me users, y...

  • Page 5

    5 step 3 the autorun screen will appear. Select install utility and driver from the menu. Note: if the autorun screen doesn’t appear automatically go to start, run, and type d:\utility\setup.Exe (where d is the letter of your cd drive) and click ok. Step 4 click next at the welcome screen..

  • Page 6

    6 step 5 click next to accept the default destination folder. Step 6 click next to accept the default program folder..

  • Page 7

    7 step 6 click continue anyway at the windows logo screen. (for windows 2000, click yes at the digital signature not found prompt). Step 7 verify yes, i want to restart my computer now is selected and click finish to restart your computer..

  • Page 8

    8 2.2 verify driver installation to verify if the driver has been installed successfully, please perform the following steps. Step 1 right-click on my computer from your desktop and select properties. Step 2 select the device manager tab. (for windows 2000/xp, select the hardware tab first and then ...

  • Page 9

    9 step 3 expand network adapters from the list and verify that airlink101 802.11g pci adapter is listed and no yellow question mark is beside it. If airlink101 802.11g pci adapter is not listed, or you see a yellow question mark beside it, please re-install the driver again..

  • Page 10

    10 3. Configure the wireless pci adapter this section describes how to connect your airlink101 802.11g wireless pci adapter to a wireless network. Note to windows xp users: you must disable the wireless zero configuration utility in order to use the wlan monitor. Please refer to the following steps ...

  • Page 11

    11 to open the wireless pci adapter’s utility go to start > (all) programs > airlink101 > wlan monitor. Note: the utility automatically adds an available wireless network to the preferred wlans box. If no ssid is added, or if the ssid is wrong, please refer to the following steps to join the appropr...

  • Page 12

    12 step 2 if you are connecting to an unsecured wireless network, a caution message will appear. Click ok to exit the message. Step 3 verify the ssid you have selected is in the preferred wlans box and click apply. Step 4 a blue circle appears indicating a connection is established. Click ok. Note: ...

  • Page 13

    13 4. Configure the wlan monitor this section describes the various functions of the wlan monitor that you can configure, including the settings of wireless encryption. 4.1 configuration tab the configuration tab displays all available access points detected. Available wlans: displays all available ...

  • Page 14

    14 listed beginning from the top of the list. If you wish to configure the properties of a wlan, highlight it and click on properties. Profile group control: once you have added all the ssids you want to the preferred wlans box, you can group them by giving them a name in the profile group control b...

  • Page 15

    15 step 2 select wep from the data encryption drop-down list. Step 3 select the appropriate key length and default key and enter the password in the network key field and click ok. The key length, default key, and password must all be the same as the wireless network you are connecting to. Step 4 cl...

  • Page 16

    16 4.1.2 configuring wpa-psk encryption step 1 select the ssid you wish to configure the encryption for from the preferred wlans box and then click properties. Step 2 select wpa-psk from the authentication mode drop-down list and then click on the authentication config button..

  • Page 17

    17 step 3 enter the password in the wpa passphrase field. The password must be the same as the wireless network you are connecting to. Step 4 click ok and then ok again. Step 5 click apply and then ok at the configuration tab..

  • Page 18

    18 4.2 status tab the status tab displays information about the connection state, hardware information, and advance state. Connection status: displays the status of the connection ssid: the ssid that the wireless adapter is connected to bssid: the mac address of the access point that the wireless ad...

  • Page 19

    19 4.3 option tab the option tab allows you to configure the wireless adapter’s general and advanced settings as well as its connection type. General setting auto launch when windows starts up: check the box to launch the wlan monitor when windows starts up remember mini status position: remembers t...

  • Page 20

    20 advance setting disable radio: check the box to disable the radio signal fragmentation threshold: set the desired fragmentation threshold rts threshold: set the desired rts threshold frequency: 802.11b/g switches automatically between 802.11b and 802.11g speed depending on the other wireless devi...

  • Page 21

    21 4.4 about tab the about tab displays the driver and utility’s version number..

  • Page 22: 5. Specifications

    22 5. Specifications frequency band • 2.4 - 2.5 ghz ism bandwidth standards • ieee 802.11b / 802.11g host interface • 32-bit pci antenna type • omni-direction +2dbi dipole detachable antenna security • 64 / 128-bit wep encryption • tkip, aes transmitted power • 14dbm @54mbps • 18dbm @11mbps data tra...

  • Page 23: Technical Support

    23 technical support e-mail: support@airlink101.Com toll free: 1-888-746-3238 web site: www.Airlink101.Com *theoretical maximum wireless signal rate based on ieee standard 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of netw...