1. DL manuals
  2. Airlink101
  3. PCI Card
  4. AWLH3028V2
  5. User Manual

Airlink101 AWLH3028V2 User Manual

Other manuals for AWLH3028V2: Quick Installation Manual
Manual is about: 802.11g Wireless PCI Adapter

Summary of AWLH3028V2

  • Page 1

    802.11g wireless pci adapter model # awlh3028v2 user’s manual rev. 1.0

  • Page 2

    2 table of contents 1. Introduction................................................................................................................................. 3 1.1 package contents ...................................................................................................................

  • Page 3: 1. Introduction

    3 1. Introduction thank you for purchasing the 802.11g wireless pci adapter. This pci adapter is designed to comply with ieee 802.11g wireless lan standard and is suitable for desktop computers with a 32-bit pci slot. This adapter supports wifi protected access (wpa2-psk and wpa-psk) data encryption...

  • Page 4: 2. Installation

    4 2. Installation 2.1 install driver & utility this section provides instructions on how to install the wireless pci adapter. The driver is installed along with the utility. Step 2.1 switch the computer off, remove the cover and insert the wireless pci adapter into an available pci slot of your comp...

  • Page 5

    5 step 2.5 insert the cd into the cd drive.The autorun screen will pop up. Windows 7 users : select install driver (windows 7) from the menu. Windows vista/xp/2000 users : select install utility and driver (windows vista/xp/2k) from the menu. Note: if the autorun screen doesn’t appear automatically,...

  • Page 6

    6 step 2.7 click install to start installing the driver/utility..

  • Page 7

    7 step 2.8 windows 2000/xp users : click continue anyway at the windows logo screen. (for windows 2000, click yes at the digital signature not found prompt). Please wait when windows is installing the driver for airlink101 802.11g wireless adapter and the utility, airlink101 wireless lan monitor. St...

  • Page 8

    8 step 2.10 select yes, i will restart my computer now. Click finish to reboot the computer. The driver and utility have been installed. Please continue to next chapter..

  • Page 9

    9 3. Connect to wireless network for windows 7 users: you will need to use the utility built in windows 7 to manage this wireless pci adapter. Currently, airlink101 wireless lan monitor does not support windows 7. Step 3.1 click on the wireless icon in the system tray at the bottom right-hand corner...

  • Page 10

    10 for windows vista/xp/2000 users: step 3.1 open the airlink101 802.11g wireless lan monitor utility by double clicking on the icon in the system tray at the bottom right-hand corner of your screen..

  • Page 11

    11 step 3.2 click the available network tab of the wireless lan monitor, select the wireless network that you wish to connect to, and click add to profile. If the network that you are attempting to connect does not have encryption enabled, you will receive a warning about connecting to an unsecured ...

  • Page 12

    12 step 3.4 the connection should be now established. Under general tab, you can check the status of wireless connectivity. Verify that ip address, subnet mask and gateway have valid numbers assigned to them (instead of all 0’s). The status should be associated, and there should be green bars next t...

  • Page 13

    13 congratulations! You have now connected to the wireless network successfully..

  • Page 14

    14 4. Configure wireless lan monitor this section describes the various functions of the 802.11g wireless lan monitor that you can configure, including the settings of wireless encryption. 4.1 general the general tab provides you with the status of the current connection, including signal, network n...

  • Page 15

    15 radio off: check/uncheck this box to turn off/on the wireless function of the adapter. Disable adapter: check/uncheck this box to disable/enable the wireless adapter. For windows xp users, you will see a checkbox “windows zero config” which can be used to enable or disable the windows xp’s built-...

  • Page 16

    16 4.2 profile settings the profile tab lists the current profiles and allows you to add/remove/edit profiles. The available profile(s) box lists all the profiles that you’ve created for your network. A profile is automatically created and added to this list when you connect to a new network. You ca...

  • Page 17

    17 enter the profile settings here, including profile name, ssid, network authentication, data encryption and network key. Click ok to save the changes. The section 4.7, configuring encryption will give you the information of how to set the different options of the wireless network encryption settin...

  • Page 18

    18 4.3 available network the available network tab lists all of the networks that the adapter detects in your area. Clicking refresh will refresh the list. To connect to a network, select a network from the list and click add to profile..

  • Page 19

    19 4.4 status the status section provides you with a list of information about the current status of the adapter..

  • Page 20

    20 4.5 statistics the statistics section gives you information about transmit and receive packet count..

  • Page 21

    21 4.6 wi-fi protected setup (easy setup button) the wi-fi protected setup™ (easy setup button) is a new and easy way to configure the encryption for your wireless network clients. In order to use it, you need to have a router that supports this feature, like the ar570w airlink101 wireless 150 route...

  • Page 22

    22 - for push button method, click push button config (pbc) button, continue to step 4.6.2 - for pin input config method, click pin input config (pin) button, continue to step 4.6.3a step 4.6.2 when you see this window pops up, within the following 2 minutes, push the easy setup button (i.E. Wps but...

  • Page 23

    23 step 4.6.3a if you choose the pin code method, click yes when prompted with the question “do you want to select a specific ap?”. Select the access point that you want to connect, and then click select..

  • Page 24

    24 write down the pin code on a piece of paper. (the following steps are different for each router. Please refer to the user’s manual of your router for detailed instructions.) step 4.6.3b log on to the router ar570w’s web configuration page from the browser (i.E. Internet explore or mozilla firefox...

  • Page 25

    25 after a few moments both the router configuration screen and the adapter configuration screen should show a message telling you that a connection is established. Note: if you cannot connect successfully with wps, you need to log in to your router’s configuration and make sure the wps feature is e...

  • Page 26

    26 4.7 configuring encryption this section describes the available encryption types and how to configure them. In most cases, encryption type will be automatically detected by the wireless adapter; all you need to do is to enter the network key, as described in section 3, step 3.3. If you are creati...

  • Page 27

    27 4.7.1 configuring wep encryption select wep from the data encryption box. Under network authentication, select either shared key or open system, depending on the router settings. If your wep key is 5 or 13-digit, alphanumeric : • check ascii and enter your wep key into the box next to passphrase ...

  • Page 28

    28 4.7.2 configuring wpa/wpa2-psk encryption (for home users) select wpa-psk/wpa2-psk from the network authentication box. Under data encryption select either aes or tkip depending on the settings for your router. Enter the encryption key that the router is using into the network key, confirm networ...

  • Page 29

    29 4.7.3 configuring wpa/wpa2 encryption (for corporate networks) select wpa 802.1x / wpa2 802.1x from the network authentication box and click ok . The following window will pop up after few seconds..

  • Page 30

    30 you can choose a network authentication method: protected eap or smart card or other certificate then click settings to configure the advanced settings. 1) choose protected eap then click on settings to configure the advanced security settings..

  • Page 31

    31 configure the advanced security settings for peap then click ok. Refer to your system administrator for information about what settings you should enter here..

  • Page 32

    32 2) choose smart card or other certificate then click on settings to configure the advanced security settings. Refer to your system administrator for information about what settings you should enter here..

  • Page 33

    33 4.8 ad-hoc and peer-to-peer wireless networks ad-hoc networking is used when you want to connect two or more computers together without going through a router. In ad-hoc mode, you lose a lot of the features that come with a router. The maximum connection speed drops to 11mbps. In addition, wep en...

  • Page 34

    34 you can also choose between no security or wep security. If you choose wep security, you can follow the instructions in the configuring encryption section of the manual. Click ok to save the profile. Select your new profile from the available profile(s) box, and double click to enable it. You nee...

  • Page 35

    35 4.9 about the about window provides the information about the airlink101 802.11g wireless lan monitor utility version and the current driver version..

  • Page 36: 5 Troubleshooting

    36 5 troubleshooting 1. If you cannot open the wireless lan monitor utility, make sure that the pci adapter is inserted firmly into the pci slot. 2. If you cannot connect to the wireless router, you may want to double check the wireless security settings on the router. The network key you entered in...

  • Page 37

    37 appendix a – specifications frequency band • 2.4ghz ism bandwidth standards • ieee 802.11g • ieee 802.11b channel • 11 channels interface • 32-bit pci antenna type • 2dbi dipole antenna security • 64 / 128-bit wep encryption • wpa-psk, wpa2-psk • 802.1x diagnostic leds • link • activity (tx/rx) t...

  • Page 38: Technical Support

    38 technical support e-mail: support@airlink101.Com toll free: 1-888-746-3238 web site: www.Airlink101.Com *theoretical maximum wireless signal rate based on ieee standard 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of netw...