Airlink101 AWLH6075 Quick Installation Manual

Other manuals for AWLH6075: User Manual

Manual is about: Wireless N PCI Adapter

Page of 4

Download

Bookmark us

Quick Installation Guide

Wireless N PCI Adapter

Model # AWLH6075

Install Wireless PCI Adapter

This Quick Installation Guide only provides the basic installation instructions.

For detailed installation instructions on advanced features, please refer to the

User’s Manual that can be found on the provided CD.

Step 1.1

SWITCH THE COMPUTER OFF, remove the cover and insert the

wireless PCI adapter into an available PCI slot of your computer.

Step 1.2

Fasten the 2 antennas to the antenna connectors on the wireless PCI

adapter.

Step 1.3

To improve radio reception, please adjust antennas to the position

shown in the picture.

Section 1

Package Contents:

• Wireless N PCI Adapter

• 2 Antennas

• Driver & Utility CD

• Quick Installation Guide

Ver. 1.0

Step 1.4

Switch on the computer.

Step 1.5

Click

Cancel when you see the Found New Hardware Wizard.

(Windows XP)

(Windows Vista

)

Page 1
Quick installation guide wireless n pci adapter model # awlh6075 install wireless pci adapter this quick installation guide only provides the basic installation instructions. For detailed installation instructions on advanced features, please refer to the user’s manual that can be found on the provi...
Page 2
Step 1.6 insert the installation cd in the cd drive. When the autorun screen pops up, select install utility and driver. Windows vista users : when you get warning message(s), make sure that you click allow to continue with the installation of the driver software. Step 1.7 click next. Step 1.8 click...
Page 3
Step 1.9 click finish and restart your computer as prompted. Step 1.10 you will see the airlink101 wireless monitor pops up. Congratulations! The wireless n pci adapter has now been successfully installed on your computer. Connect to wireless network note: if the airlink101 wireless monitor does not...
Page 4
Step 2.2 type in the network key of your wireless network and click ok. Step 2.3 after the adapter connects to the wireless network successfully, a blue triangle will appear at the front of your wireless network. 1. If you cannot open the wireless monitor utility, make sure that the pci adapter is i...