Airlinkplus 32-bit PCI Gigabit Ethernet Card AGIGA32PCI Quick Installation Manual

Ver. 1A

Quick Installation Guide

Package Content:

• 

32-bit PCI Gigabit Ethernet

   Card

• 

Driver Disk

• 

Quick Installation Guide

1

Model # AGIGA32PCI

Section 1

Installing Hardware

Step 1

 Shut down the computer, unplug its power cord, and remove the chassis

cover.

Step 2

 Insert the Ethernet card into a PCI slot on the computer and secure it with

a chassis screw.

Step 3

 Cover the computer’s chassis.

Step 4

 Connect an Ethernet cable to the RJ-45 port of the Ethernet card.

Step 5

 Re-plug the power cord and turn on the computer.

Section 2

Installing Driver

Note: The following steps and screen shots are for

Windows XP. Steps for other Windows operating

systems will be noted beneath each screen shot.

Step 1

 At the Found New Hardware Wizard, select Install from a list or

specific location (Advanced) and click Next.

Windows 2000: Click Next  at the Found New Hardware Wizard. Select

Search for a suitable driver for my device (recommended) and click Next.

Windows ME: Click Next  at the Add New Hardware Wizard. Select Specify

the location of the driver (Advanced) and click Next.

Windows 98SE: Click Next  at the Add New Hardware Wizard. Select Search

for the best driver for your device (Recommended) and click Next.