Airlinkplus ARW027 Quick Installation Manual

Section 1

Quick Installation Guide

Connecting the Router

Model # ARW027

Package Contents:

    Wireless Router

Power Adapter

Quick Installation Guide

User’s Manual

Note: Prior to connecting the router, be sure to power off your computer, DSL/Cable

modem, and the Wireless Router.

Step 1

 Connect one end of a network cable to the WAN port of the Wireless Router

and connect the other end of the cable to the DSL/Cable modem.

Step 2

 With another network cable, connect one end of the cable to your computer’s

network card and connect the other end to one of the LAN ports of the Wireless

Router.

Step 3

 Power on the DSL/Cable Modem.

Step 4

 Power on the Wireless Router by connecting one end of the supplied power

adapter to the power jack of the Wireless Router and connecting the other end to an

electrical outlet.

Step 5

 Power on your computer.

The following figure illustrates a connection example:

Section 2

Configuring Network Clients

Before configuring the Wireless Router, you must configure the network clients in order

to establish proper connection with the router. The router has a default IP address of

192.168.1.1 and a subnet mask of 255.255.255.0. Follow the steps below according to

your operating system to configure your network clients.

Step 1

For Windows 2000/XP:

 Right-click My Network Places on the desktop and select

Properties. Right-click Local Area Connection and select Properties.

For Windows 95/98/ME:

 Right-click Network Neighborhood or My Network Places

on the desktop and select Properties.