1. DL manuals
  2. AirLive
  3. Switch
  4. POE-FSH2442G
  5. User Manual

AirLive POE-FSH2442G User Manual

Manual is about: 24+4-port Web Smart PoE Switch

Summary of POE-FSH2442G

  • Page 1

    Poe-fsh2442g 24+4-port web smart poe switch user’s manual.

  • Page 2: Declaration of Conformity

    Clause description ■ en 55022:1998+1 limits and methods of measurement of radio disturbance 2002+a2:2003 class characteristics of information technology equipmen ■ en 61000-3-2:2000+ disturbances in supply systems caused by household appliances a2:2005 class a and similar electrical equipment "harmo...

  • Page 3

    Airlive poe-fsh2442g ce declaration statement country declaration country declaration cs Česky [czech] ovislink corp. Tímto prohlašuje, že tento airlive poe-fsh2442g je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/es. Lt lietuvių [lithuanian] Šiuo ovislink corp...

  • Page 4: Copyright

    Copyright copyright ©2005/2006 by this company. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, ch...

  • Page 5: Ul Warning

    Ul warning a) elevated operating ambient temperature- if installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible wi...

  • Page 6: Content

    I content chapter 1: about this guide ............................................................................................................................... 1 1.1 purpose ...........................................................................................................................

  • Page 7

    Airlive poe-fsh2442 user’s manual ii 6.11.5 statistic .................................................................................................................................................... 23 6.11.6 factory reset.............................................................................

  • Page 8

    Airlive poe-fsh2442 user’s manual 1 chapter 1: about this guide congratulations on your purchase of the poe-fsh2442g. This device integrates 1000mbps gigabit ethernet, 100mbps fast ethernet and 10mbps ethernet network capabilities in a highly flexible package. 1.1 purpose this guide discusses how to...

  • Page 9: Chapter 2:  Introduction

    Airlive poe-fsh2442 user’s manual 2 chapter 2: introduction this chapter describes the features of the poe-fsh2442g and some background information about ethernet/fast ethernet/gigabit ethernet switching technology. 2.1 gigabit ethernet technology gigabit ethernet is an extension of ieee 802.3 ether...

  • Page 10

    Airlive poe-fsh2442 user’s manual 3 were characterized by higher latencies. Routers have also been used to segment local area networks, but the cost of a router, the setup and maintenance required make routers relatively impractical. Today switches are an ideal solution to most kinds of local area n...

  • Page 11

    Airlive poe-fsh2442 user’s manual 4 chapter 3: unpacking and installation this chapter provides unpacking and installation information for the switch. 3.1 unpacking open the giftbox of the poe-fsh2442g and carefully unpacks its contents. The packing content should contain the following items: one 24...

  • Page 12

    Airlive poe-fsh2442 user’s manual 5 figure 2. Combine the switch with the provided screws then, use screws provided with the equipment rack to mount each switch in the rack. Figure 3. Mount the switch in the rack 3.4 connecting network cable the switch supports 24-port 10/100mbps 100base-tx fast eth...

  • Page 13

    Airlive poe-fsh2442 user’s manual 6 chapter 4: identifying external components this chapter describes the front panel, rear panel, and led indicators of the switch. 4.1 front panel the figure below shows the front panels of the switch. Figure 4. Front panel led indicators: comprehensive led indicato...

  • Page 14

    Airlive poe-fsh2442 user’s manual 7 ac power connector: this is a three-pronged connector that supports the power cord. Plug in the female connector of the provided power cord into this connector, and the male into a power outlet. Supported input voltages range from 100- 240v ac at 50-60hz..

  • Page 15

    Airlive poe-fsh2442 user’s manual 8 chapter 5: understanding led indicators the front panel leds provides instant status feedback, and, helps monitor and troubleshoot when needed. Figure 6. Led indicators led indicator color status meaning power and system pwr ● green on off power on power off sys ●...

  • Page 16

    Airlive poe-fsh2442 user’s manual 9 off port is connected 100mbps ● green on off works on 100mbps works on 10mbps 1000mbps ● green on off works on 1000mbps works on 10mbps or 100mbps.

  • Page 17: Chapter 6:  Configuration

    Airlive poe-fsh2442 user’s manual 10 chapter 6: configuration through the web browser you can configure the switch such as vlan, port trunking, and broadcast storm … etc. With the attached web management utility, you can easily discover all the web management switch, assign the ip address, changing ...

  • Page 18

    Airlive poe-fsh2442 user’s manual 11 system word definitions in the discovery list: z mac address: shows the device mac address. Z ip address: shows the current ip address of the device. Z protocol version: shows the version of the utility protocol. Z product name: shows the device product name. Z s...

  • Page 19

    Airlive poe-fsh2442 user’s manual 12 delete item: to delete the device in the monitor list. 6.4 device setting you can set the device by using the function key in the device setting dialog box. Configuration setting: in this configuration setting, you can set the ip address, subnet mask, gateway, se...

  • Page 20

    Airlive poe-fsh2442 user’s manual 13 z monitor save: to record the setting of the monitor list to the default, when you open the web management utility next time, it will auto load the default recorded setting. Z monitor save as: to record the setting of the monitor list in appointed filename and fi...

  • Page 21

    Airlive poe-fsh2442 user’s manual 14 6.6 configuring the switch the poe-fsh2442g has a web gui interface for smart switch configuration. The switch can be configured through the web browser. A network administrator can manage, control and monitor the switch from the local lan. This section indicates...

  • Page 22

    Airlive poe-fsh2442 user’s manual 15 figure 16. Configuration menu.

  • Page 23

    Airlive poe-fsh2442 user’s manual 16 6.9 configuration setting find that there are seven items, including port setting, ieee 802.1q vlan settings, trunk setting, mirror setting, ieee 802.1p default priority, poe port setting, poe system setting and broadcast strom control setting in setup menu. 6.9....

  • Page 24

    Airlive poe-fsh2442 user’s manual 17 figure 18. 802.1q vlan setting add vid: click to create a new vid group, assigning ports from 01 to 16 as untag, tag, or not member. A port can be “untagged” in only one vid. To save the vid group, press apply. Figure 19. Add new vid delete: click to delete selec...

  • Page 25

    Airlive poe-fsh2442 user’s manual 18 6.9.3 trunk setting the trunking function enables the cascading of two or more ports for a combined larger bandwidth. Up to six trunk groups may be created, each supporting up to 8 ports. Add a trunking name and select the ports to be trunked together, and click ...

  • Page 26

    Airlive poe-fsh2442 user’s manual 19 figure 25. Ieee 802.1p default priority setting.

  • Page 27

    Airlive poe-fsh2442 user’s manual 20 6.10 poe setting 6.10.1 poe port setting when you click on the poe setting, the poe status will appear on the screen, it will display the poe status, including port enable, power limit, power (w), voltage(v), current (ma), classification and port status. Note: th...

  • Page 28

    Airlive poe-fsh2442 user’s manual 21 > port 2 > … > port 24. 6.10.3 broadcast storm control setting the broadcast storm control feature provides the ability to control the receive rate of broadcasted packets. If enabled (default is disabled), threshold settings of 8,000 ~ 4,096,000 bytes per second ...

  • Page 29

    Airlive poe-fsh2442 user’s manual 22 figure 30. System setting 6.11.3 trap setting by configuring the trap setting, it allows web management utility to monitor specified events on this web- smart switch. By default, trap setting is disabled. When the trap setting is enabled, enter the destination ip...

  • Page 30

    Airlive poe-fsh2442 user’s manual 23 figure 32. Password setting 6.11.5 statistic the statistic menu screen will show the status of each port packet count. Figure 33. Statistics refresh: to renew the details collected and displayed. Clear counter: to reset the details displayed. To view the statisti...

  • Page 31

    Airlive poe-fsh2442 user’s manual 24 proceed the setting of the recorded file. Figure 36. Backup setting note: when restoring a recorded file, the current password will not be erased. 6.11.8 firmware upload the firmware upload helps you to backup or upload firmware from/to the switch. Once you need ...

  • Page 32

    Airlive poe-fsh2442 user’s manual 25 chapter 7: technical specifications standard z ieee 802.3 10base-t z ieee 802.3u 100base-tx z ieee 802.3ab 1000base-t z ieee 802.3z 1000base-sx/lx (gbic) z ieee 802.3af dte power via mdi (12,36 pin) interface z 24 x 10/100mbps auto-negotiation, auto-mdix poe port...

  • Page 33

    Airlive poe-fsh2442 user’s manual 26 address table z 8k led indicators z per unit : power, system ( 2 leds ) z per port : tx: link/activity, speed ( 2 leds ) z poe : poe status (port 1 ~ port 24) (bi-color led) z per copper gigabit port: link/act, 1000m, 100m z per gbic gigabit port: link/act, 1000m...