Airmaster TIGER 11/510 Operation & Maintenance Instructions Manual - Before Use

7

BEFORE USE

Before connecting your compressor to the power supply, check the following:-

• Set the ON/OFF switch to the 

OFF position (pushed down).

• Make sure that the compressor 

is on level ground. 

• Make sure that the supply 

voltage matches the voltage 

shown on the data label.

CHECK THE OIL LEVEL

1. Make sure that the oil level is half 

way up the oil sight glass.

2. If not, remove the oil cap and 

add oil to the reservoir.

• Only use SAE30 compressor oil, 

available from your Clarke 

Dealer Part No. 3050801