Airpura UV600 Operating & Filter Replacement Directions

Operating 

& Filter Replacement 

Directions

Thank You for choosing an 

Airpura High Efficiency Air Purifier

To bring you the benefits of clean indoor air 

To Begin Using Your Airpura...

Inspect the exterior of your Airpura to verify there is no 

damage from shipping. If any damage is noted please 

follow the instructions in the Airpura returns policy.

Wipe the unit with a damp cloth to remove any dust from 

packaging

Plug the unit into a regular grounded 110 volt outlet

Turn on the unit to MAX and allow it to run for a few minutes

Set the variable speed control to the level you wish

The most efficient way to use your Airpura for regular air 

quality maintenance is to run it at a low speed 24 hours a 

day 7 days a week

Feel the difference breathing clean air makes

 to your health

Replace the 

4 screws and 

tighten

Turn the 

Airpura

back onto 

it's casters

Replace the 

gasket

To close the filter chamber

Position the 

indentation

in the cover

into the center of

the HEPA filter

UV600

Replacing the UV Bulb

Open the filter chamber following the instructions on page 2

Snip off the plastic retainer (for shipping only:

doesnot need to be replaced)

Pull the bulb upward out of the connector

Push the replacement bulb firmly into the connector

Close the filter chamber following instructions on page 3

Airpura limited warranty

5 years on parts and 10 years labor

Register on line at www.airpura.com