AirQ AQ150 User Manual - page 12
Setting Up AirQ
™
Selecting Operating Mode
With the cover off, decide which mode of operation you want to use.
1. 24/7 mode allows for continuous scenting at the intensity level you select.
It requires you to turn AirQ
™
ON and OFF.
2. Program mode allows for up to 3 programs of start/stop time for everyday or
each day of the week.
24/7 Mode Setup: (In this mode, you must turn AirQ ON and OFF. This mode is
good for 24-hour operation.
1. Turn the dial to Run 24/7.
2. Place the cover back on the appliance.
3. Press the POWER button. A blue light will illuminate indicating the AirQ system
is ready and scenting will begin.
4. Set desired intensity level (1-50) for 24/7 operation by pressing the +/- buttons.
Program Mode Setup: (This option allows you to set up to 3 programs of start/
stop time for everyday or each day of the week.)
1. Turn the dial to Set Program. The Program icon comes on.
2. The “Mon” icon will blink, indicating you are selecting Monday for setting
program. If you want to program a specific day, use the +/- buttons to scroll
to the day or scroll to the end for all days. You can set maximum of 3 on/off
programs individually for each day or same for every day. After selecting the day,
press the Set button to advance to programming options.
3. Now the “1” icon is turned on to indicate you are setting program 1. The Rate
(intensity) digits blink to prompt you to set the rate. You may set to any value
between 1 and 50, or set to 0 to disable the program. Press the Set button to
advance to programming Start and End times.
NOTE: If you set the rate to 0, then the current and subsequent programs are all
12