[ operation manual ] updated: 09/12/15.
Elements: distort welcome! Thank you for purchasing elements: distort. Distort is a versatile, warm-sounding stereo eq and distortion effect, which integrates seamlessly into our elements modular series. It combines a freely assignable envelope follower with a parabolic eq and waveshaper section, co...
Elements: distort contents loading and saving patches loading and saving patches in chorus is done in the same way as with any other reason device. See “loading patches” and “saving patches” in the reason operation manual for further information. Controls and displays env follower the env follower g...
Elements: distort amp — controls the amount of envelope modulation applied to the destinations specified by the individual envelope mod target toggle buttons. Attack — controls the attack of the envelope. Higher settings result in a slower attack, whereas lower settings are much faster. Release — co...
Elements: distort waveshaper drive — acts as a pre-amp, in that it boosts the volume level of the input signal before the distortion algorithm is applied to the signal. Distortion type — toggles between the 6 different distortion types. Distortion types hard clip — amplifies and hard-clips the audio...
Elements: distort global mix — controls the dry/wet mix of the device. Vol — controls the volume level of the device’s output, allowing you to either attenuate it or boost it by up to 6 decibels. Rear panel as with most other devices in our elements series, distort offers two distinct types of cv mo...
