1. DL manuals
  2. Animo
  3. Coffee Maker
  4. OptiVend NG 2015
  5. Service Book

Animo OptiVend NG 2015 Service Book

Summary of OptiVend NG 2015

  • Page 1

    Model 2015 optivend next generation service book tastes differ..

  • Page 2

    2 2016/12 rev. 2.0 optivend ng table of contents foreword ........................................................................................................................... 5 1. Introduction optivend ng ...........................................................................................

  • Page 3

    Optivend ng en 2016/12 rev. 2.0 3 4.3 the service menu ......................................................................................................... 36 [2.1] quick recipe pro [2.2] button settings [2.3] recipe settings ........................................................................

  • Page 4

    4 2016/12 rev. 2.0 optivend ng 11. Special options .............................................................................................................. 74 11.1 installation optivend ng hot & cold 12. Payment systems .............................................................................

  • Page 5

    Optivend ng en 2016/12 rev. 2.0 5 © 2016 animo® all rights reserved. No part of this document may be reproduced and/or made public in print, microfilm, electronic media or any other form without the manufacturer’s prior consent. This also applies to the corresponding diagrams and/or charts. Foreword...

  • Page 6

    6 2016/12 rev. 2.0 optivend ng 1. Introduction optivend ng explanation optivend ng type designation: designation meaning description dispensing hight cup thermos jug 1e digit number canisters 1 - 6 2e digit number of mixers 1 - 3 s narrow compact execution 118mm - cups / mugs 118mm ts thermos small ...

  • Page 7

    Optivend ng en 2016/12 rev. 2.0 7 1.1 model code standard canister configuration the optivend ng models are standard executed according below mentioned canister configuration printed in bold. Alternative canister configuration the optivend ng models can be altered with a alternative canister configu...

  • Page 8

    8 2016/12 rev. 2.0 optivend ng optivend ng / 1 mixer 1 1 2 1 2 3 1 1 3 5 1 3 5 6 1 2 5 6 3 1 2 4 6 3 5 mixer 1 mixer 1 mixer 1 mixer 2 dv 1 dv 1 dv 2 dv 1 mixer 1 dv 1 dv 2 dv 1 dv 3 dv 2 dv 1 dv 3 dv 1 dv 3 dv 1 dv 3 unit 1 unit 1 unit 1 unit 2 unit 1 unit 1 unit 3 unit 1 unit 2 unit 3 unit 1 unit ...

  • Page 9

    Optivend ng en 2016/12 rev. 2.0 9 optivend ng / 1 mixer 1 1 2 1 2 3 1 1 3 5 1 3 5 6 1 2 5 6 3 1 2 4 6 3 5 mixer 1 mixer 1 mixer 1 mixer 2 dv 1 dv 1 dv 2 dv 1 mixer 1 dv 1 dv 2 dv 1 dv 3 dv 2 dv 1 dv 3 dv 1 dv 3 dv 1 dv 3 unit 1 unit 1 unit 1 unit 2 unit 1 unit 1 unit 3 unit 1 unit 2 unit 3 unit 1 un...

  • Page 10

    10 2016/12 rev. 2.0 optivend ng optivend ng / 1 mixer 1 1 2 1 2 3 1 1 3 1 2 3 1 2 3 4 1 3 5 1 3 5 6 1 2 5 6 3 1 2 4 6 3 5 mixer 1 mixer 1 mixer 1 mixer 2 mixer 1 mixer 2 dv 1 dv 1 dv 2 dv 1 mixer 1 dv 2 dv 1 dv 1 dv 2 dv 1 dv 2 dv 1 dv 2 dv 1 dv 3 dv 2 dv 1 dv 3 dv 1 dv 3 dv 1 dv 3 mixer 1 mixer 2 m...

  • Page 11

    Optivend ng en 2016/12 rev. 2.0 11 1 2 5 6 3 dv 1 dv 3 unit 1 unit 2 unit 3 dv 6 dv 2 optivend ng hs duo 53 ts hs duo 1 3 mixer 1 mixer 2 dv 2 dv 1 unit 1 unit 2 dv 6 dv 5 22 ts hs duo 1 2 3 4 dv 2 dv 1 mixer 1 mixer 2 unit 1 unit 2 dv 6 dv 5 42 ts hs duo dv 5 mixer 1 mixer 3 2 43 ts hs duo 1 3 5 6 ...

  • Page 12

    12 2016/12 rev. 2.0 optivend ng 2. First menu settings after installation the following data must be set in the operator and service menus immediately after the machine’s first use. The language factory setting is english. Switch on machine ● follow the instructions on the display switch the machine...

  • Page 13

    Optivend ng en 2016/12 rev. 2.0 13 water hardness table water quality hardness service moment after x (cups) °d °f mmol/l mgcaco3/l very hard 18-30 32-55 3,2-5,3 321- 536 5000 hard 12-18 22-32 2,2-3,2 268-321 12.500 average 8-12 15-22 1,4-2,2 214-268 20.000* soft 4-8 7-15 0,7-1,4 72-214 40.000 very ...

  • Page 14

    14 2016/12 rev. 2.0 optivend ng 2.1 how to program a recipe? Every machine contains pre-programmed basic recipes. Each key can be changed, if required. In below example button 1 will be change from coffee into cappuccino . 2.2 button settings │ └── 2.1.01 button 1 │ │ └─── recipe │ │ └──────────────...

  • Page 15

    Optivend ng en 2016/12 rev. 2.0 15 start * 2.2 how do you correct a recipe? Easy way to check the dispensed drink- volume and taste without leaving the menu! 2.1 quick recipe pro │ └── 2.1.01 coffee (recipe) │ │ └─── coffee │ ingrediënt (coffee) │ │ 2.1.04 cappuccino (recipe) └─── cappuccino │ cup v...

  • Page 16

    16 2016/12 rev. 2.0 optivend ng ? Gram topping choco start test 2.3 how do you measure the weight of an ingredient only? Only the ingredient motor will be driven (no mixer motor is driven and no water is dispensed). It is recommended to check the ingredient measurements using a mini scale. These are...

  • Page 17

    Optivend ng en 2016/12 rev. 2.0 17 2.4 advanced recipe settings before changing the advanced recipe settings (service menu 2.3) you should first know how the various parts such as valves, coffee grinder, ingredient motors and mixers work together, see section time line recipe settings. Keep to the f...

  • Page 18

    18 2016/12 rev. 2.0 optivend ng 3. Principle of operation 3 1 2 1 2 3 12 7 8 5 11 10 6 4 9 optivend 32 ng item description item description 1. Instant canisters 7. Water inlet mixer bowl 2. Im 1-6 canister drive motor 8. Hot water spout 3. Dv 1-6 dispensing valves 9. Drink spout 4. H 2-3 boiler 10. ...

  • Page 19

    Optivend ng en 2016/12 rev. 2.0 19 3.1 water management 3/8 “ kw1 nrv wf nrv ntc sensor dv1 dv2 dv4 t1 h1 mixer mm 3 1 2 3 1 2 3 1 2 3 3/4 “ dv3 1 2 3 mixer mm 2 boiler lsl lsh dv1 - 5 boiler mixer mm 1 1 2 3 dv5 excl. Hs duo * hot & cold kw1 3/4 “ kw3 * 1 2 3 3 2 1 hot water ingredient 1/2 ingredie...

  • Page 20

    20 2016/12 rev. 2.0 optivend ng 3.2 components components image inlet valve kw1 [02801] opens and closes the water supply, 24 vdc coil closure. Flow speed abt. 2,5 l/min. Inlet valve kw1 [1005239] opens and closes the water supply, 24 vdc coil closure. Flow speed abt. 7,0 l/min. Boiler optivend ng (...

  • Page 21

    Optivend ng en 2016/12 rev. 2.0 21 components image solid state relais (ssr) [02799] the heating element is controlled by a solid state relay. Pay attention for the polarity of the 24vdc side! Ssr 12-30 vdc 230 vac cup detection sensor [1003231] reflection infrared sensor. This sensor can optionally...

  • Page 22

    22 2016/12 rev. 2.0 optivend ng 3.3 cup detection (optional) (excl. Hs duo) the sensors detect the presence of a cup below the coffee outlet of the beverage dispenser. Coffee is only prepared when a cup has been placed. Also the outlet for hot water is equipped with a cup sensor. The sensitive senso...

  • Page 23

    Optivend ng en 2016/12 rev. 2.0 23 3.4 instant group the instant product (ingredient) is pushed out of the canister [ 1 ] by a worm screw and falls via the dispensing nozzle into the mixer unit [ 3.4 ]. At the same time, hot water is dispensed into the mixer unit. The instant product and the water a...

  • Page 24

    24 2016/12 rev. 2.0 optivend ng 3.4.1 adjustable mixer speed the mixer speed is adjustable from 20 to 100%. During the running time two speeds can set, speed 1 and speed 2 . It’s possible to adjust the percentage of time speed 1. Speed 2 is then performed over the remaining mixing time . Dv 1wt dv 1...

  • Page 25

    Optivend ng en 2016/12 rev. 2.0 25 3.4.2 multi shot coffee recipe normally it is sufficient to dispense the instant coffee product in one single shot (see left) in the mixer bowl. Visually a quite short of concentrated coffee runs into the cup, the rest is water. In the optional recipes there are so...

  • Page 26

    26 2016/12 rev. 2.0 optivend ng 3.4.3 ventilation mixer group the fan on the rear side of the machine ventilates the mixer group. The fan is easy to remove by turning the screw underneath. The fan speed can be adjusted in the service menu: 2.4 settings │ └── 2.4.05 ventilator │ └─── fan time │ └─── ...

  • Page 27

    Optivend ng en 2016/12 rev. 2.0 27 3.5 boiler system turn on the device using the on/off switch. The display will light up. The magnetic valve [1.7] will open and the hot water reservoir [1] will be filled to the maximum level electrode [1.2]. The heating element [1.5] will be switched on when the m...

  • Page 28

    28 2016/12 rev. 2.0 optivend ng level regulation when a drink is being dispensed the water level drops and the maximum level electrode [1.2] is released; the inlet valve [1.7] (2.5 litres/min.) opens and immediately refills the reservoir until the maximum level [1.2] is reached again. If the water l...

  • Page 29

    Optivend ng en 2016/12 rev. 2.0 29 3.5.1 dispensing valves [03250] after a drink has been selected one of the dispensing valves [dv] opens and lead the hot water to the brewer or mixer system. The flow rate of each valve is adjusted by means of the adjusting screw [2.5.3] on the valve. The outflow q...

  • Page 30

    30 2016/12 rev. 2.0 optivend ng 3.5.2 removing / replacing the hot water dispensing valves are accessible by dismantling the cover behind the ingredients canisters. 1. Switch off the machine. 2. Drain the water heater with the drain hose. Attention: hot water. 3. Take the coffee- and instant caniste...

  • Page 31

    Optivend ng en 2016/12 rev. 2.0 31 4. Menu structure 4.1 the operator / service menu most of the settings, including the product settings are secured by a pin code. This pin code is intended to prevent the user accessing the service menu. It is recommended not to leave this document with the user af...

  • Page 32: ▲

    32 2016/12 rev. 2.0 optivend ng • menu items are connected to each other in a ‘loop’. • exit the operator menu; press the x key 1x. • exit the service menu; press the x key 2x. • after exiting the service menu, a long peep signal follows as a sign that changed settings are being stored in the memory...

  • Page 33

    Optivend ng en 2016/12 rev. 2.0 33 4.2 the operator menu operator menu main item sub-item range set description 1.0 free vend yes-no yes set the machine for free or paid vending. (if activated) 1.1 clock time hh:mm set the clock to the correct local time. Date dd-mm-yyyy set the clock to the correct...

  • Page 34

    34 2016/12 rev. 2.0 optivend ng example: three switching times set machine automatically switches from stand-by to on at 9 am. At 11am back to stand-by, etc., etc. During stand-by the key panel is switched off and the boiler temperature drops to the set stand-by temperature (menu 2.4 settings / stan...

  • Page 35

    Optivend ng en 2016/12 rev. 2.0 35 operator menu continued... Main item sub-item range set description 1.3 recipe counters recipe 1 recipe 12 total cups total count per recipe (from free till jugs). Number of drinks free number of drinks paid low price number of drinks paid high price number of drin...

  • Page 36

    36 2016/12 rev. 2.0 optivend ng 4.3 the service menu service menu main item sub-item range set description 2.1 quick recipe pro 1 12 cup volume 50-200 ml 120ml use this for setting the volume and strength of coffee, milk, sugar and cocoa easily per recipe (drink key). Only the ingredients applicable...

  • Page 37

    Optivend ng en 2016/12 rev. 2.0 37 key switch software menu parameter key switch key switch multicup free vend payment system g13 / mdb (off) (on) table 0 yes n.A. Free cup free cup no yes paid cup free cup no free cup free cup >1 yes n.A. Free jug free jug no yes paid jug free jug no free jug free ...

  • Page 38

    38 2016/12 rev. 2.0 optivend ng service menu continued …. Main item sub item sub item range description 2.3 recipe setting 1 12 unit 1 dv 1 wt 0,0-30,0 s delay time water 1 dv 1 0-100 ml dispensing amount water 1 rinse 1 wt 0,0-20,0 s delay time rinsing water 1 rinse 1 0-15 ml dispensing amount rins...

  • Page 39

    Optivend ng en 2016/12 rev. 2.0 39 service menu continued… main item sub item sub item range description 2.3 recipe setting (continued…) 1 12 unit 3 dv 3 wt 0,0-30,0 s waiting time water 3 dv 3 0-100 ml dispensing amount water 3 rinse 3 wt 0,0-20,0 s waiting time rinsing water 3 rinse 3 0-15 ml disp...

  • Page 40

    40 2016/12 rev. 2.0 optivend ng service menu continued… main item sub item item range set- ting description 2.4 instellingen taal english language choice display. Ex factory setting english. Nederlands (dutch) deutsch (german) français (french) svenska (swedish) norsk (norwegian) suomi (finnish) dan...

  • Page 41

    Optivend ng en 2016/12 rev. 2.0 41 service menu continued ….. Main item sub item item range set- ting description 2.4 settings (continued...) coin system none no payment system connected g13 coin channel 1 coin channel 6 0-100.00 + token € 0.05 € 0.10 € 0.20 € 0.50 € 1.00 € 2.00 coin value per chann...

  • Page 42

    42 2016/12 rev. 2.0 optivend ng service menu continued ... Main item sub-item item range set description 2.4 instellingen (vervolg...) i/0 reset counters yes-no no add menu item reset counters to the operator menu. I/0 quick recipe yes-no no menu item snelrecept aan het opera- tormenu toevoegen drip...

  • Page 43

    Optivend ng en 2016/12 rev. 2.0 43 service menu vervolg ... Hoofd item sub item item bereik set beschrijving 2.6 service boiler service moment cups 0-50.000 20.000 after reaching the set service mo- ment (cups or month), the message service boiler appears in the display on switching on. See also cha...

  • Page 44

    44 2016/12 rev. 2.0 optivend ng service menu continued ... Main item sub-item sub range description 2.7 hardware test inputs temperature boiler temp shows the status of the sensors/switches concerned. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 17 18 1 2 3 4 5 16 level sensors high yes/no low yes/no drip tr...

  • Page 45

    Optivend ng en 2016/12 rev. 2.0 45 service menu continued…. Main item sub item sub range description 2.7 hardware test (continued...) calib. Valves test by holding in test button (for 1 sec.) to open the rel- evant valve for 10 seconds. Dv1 15 ml / sec. Calibrate to 150ml (10sec. X 15ml) dv2 15 ml /...

  • Page 46

    46 2016/12 rev. 2.0 optivend ng service menu continued…. Main item sub-item item description 2.8 read log last 20 error messages including time and date will be saved 2.9 erase log are you sure? Log will be erased 2.10 load defaults # see section 1.1 model code model # hs duo ov11s ov22 ts ov53 ts o...

  • Page 47

    Optivend ng en 2016/12 rev. 2.0 47 service menu continued ... Main item sub-item item description 2.11 sd menu (continued....) save data memory card memory card personal settings with this menu item personal settings can be saved on an sd memory card and/or copied to another machine. All changed set...

  • Page 48

    48 2016/12 rev. 2.0 optivend ng service menu continued ... Main item sub-item item range set description 2.12 change pin code new pin code repeat pin code with this menu item the pin code can be changed. Use only the keys 1 to 4. The complete service menu is secured behind this pin code. This pin co...

  • Page 49

    Optivend ng en 2016/12 rev. 2.0 49 5. Software 5.1 memory card specs type: sd (secure digital card) size: 16 mb or bigger 5.2 machine setting management the following changed settings can be saved on an sd memory card and/or copied to another machine: - personal settings - recipes the following data...

  • Page 50

    50 2016/12 rev. 2.0 optivend ng when loading new software the following changed settings (data) are lost: - changed recipes - changed personal settings - a non-standard language file will be overwritten by the standard language file nl/gb/du/fr counts, log and operating hours will be preserved! 1. D...

  • Page 51

    Optivend ng en 2016/12 rev. 2.0 51 6. Maintenance 6.1 daily rinsing program after 1 day the display shows rinse. This message will disappear again after the rinsing program is executed. 1. Activate the rinsing program [1] and follow the instructions in the display. 2. The rinsing program can also be...

  • Page 52

    52 2016/12 rev. 2.0 optivend ng 6.2 periodic maintenance 6.2.1 service boiler during installation of the machine the boilers service moment has been set. See service menu item 2.6 service boiler / 2.6.1 service moment during use, the drinks are counted. When the boiler service moment is reached the ...

  • Page 53

    Optivend ng en 2016/12 rev. 2.0 53 6.2.2 service contracts preface preventative maintenance will lengthen the life cycle of the device and reduce the chance of malfunction. Before carrying out maintenance, read the safety instructions in the user manual, service manual, and recommended cleaning agen...

  • Page 54

    54 2016/12 rev. 2.0 optivend ng service activity time product art.No. Optivend ng x1(s) x2(s) x3 mixer(s) 10 min. Check the motor shaft for dirt and wear. Apply food grade grease to the water connection. Replace mixer blade. 1003569 1x 2x 3x replace the seals in the green mixer mounting ring. Or rep...

  • Page 55

    Optivend ng en 2016/12 rev. 2.0 55 warning • the machine has to be opened to descale the water reservoir. This will expose parts under voltage that can easily be touched. This can lead to life threatening situations! Warning • do not leave the device during maintenance work. • when descaling always ...

  • Page 56

    56 2016/12 rev. 2.0 optivend ng 3. Remove the rear plate [ 2 ] and unscrew the reservoir lid [ 3 ]. Take care: hot! 4. Read the warnings and instructions for use on the animo descaler sachets before dissolving two 50g sachets (8-10 dessert spoons) into 2 litres warm water. 5. Slowly pour the 1 litre...

  • Page 57

    Optivend ng en 2016/12 rev. 2.0 57 9. Disassemble the valves. There are three possibilities: a cleaning / descaling remove the seals and place them in a descaler solution. After the parts are cleaned build the valves back together. See section 3.5.1 dispensing valves b fit a replacement set after th...

  • Page 58

    58 2016/12 rev. 2.0 optivend ng rince! 12. Drain the boiler completely empty using the drain hose [ 8 ] and inspect if the boiler is clean. Repeat the above scaling procedure if there is still scale in the boiler. 13. Turn on the machine, the boiler refills with fresh water and heats up. 14. Turn of...

  • Page 59

    Optivend ng en 2016/12 rev. 2.0 59 7. Transport / storage please do the following before transporting or putting the device in storage. 1. Carry out the brewer and mixer unit cleaning programme. 2. Clean the ingredient canister(s), mixer system, leaking tray and casing. 3. Switch off the device and ...

  • Page 60

    60 2016/12 rev. 2.0 optivend ng 8. Component accessibility ventilator interface mixers optivend ng 34 ts hot water outlet main switch sd-cardholder drink outlet instant canisters ingredient motors dispensing valves service panel.

  • Page 61

    Optivend ng en 2016/12 rev. 2.0 61 ventilator ingredient motors mixer optivend ng 43 ts water reservoir level / ntc solid state relais boil protection main power cord ventilator ts modellen only heating element main pc board boil dry safety inlet valve 24v power supply drip tray full sensor key swit...

  • Page 62

    62 2016/12 rev. 2.0 optivend ng 9. Electronics summary warning during repairs or maintenance work, avoid electrostatic discharge (esd) on the control unit. ● main pc board .............................................. 9.1 ● interface / display .......................................... 9.2 ● power ...

  • Page 63

    Optivend ng en 2016/12 rev. 2.0 63 9.1.1 main circuit board inputs connector j12 connector cable between the main circuit and door circuit connector j250 (pwm fan) pin fan colour notes 1 pwm signal black 2 - 3 pos red 4 neg blue connector j7 (inputs) pin sensor colour notes 1-2 - - 3 lb drip tray ye...

  • Page 64

    64 2016/12 rev. 2.0 optivend ng 9.1.2 main circuit board outputs connector j2 pin motor colour notes 17-18 mixer 1 black pay attention to the right direction! Common +24 vdc (red wire) to red point on mixer and ingredient motor. 15-16 mixer 2 violet 13-14 mixer 3 pink 11-12 ingredient motor 1 brown ...

  • Page 65

    Optivend ng en 2016/12 rev. 2.0 65 9.1.3 main circuit board communication the machine has standardized vending machine con- nections for connecting coin mechanism, coin changer or cashless payment systems. These connectors meet the mdb protocol for vending machines. For further information or advice...

  • Page 66

    66 2016/12 rev. 2.0 optivend ng 9.2 interface / display the interface board [art.No. 1004066] connects all the components located in and on the door and is connected by a cable to the main control. 9.2.1 connections interface & display conn notes j100 main control j101 front membrane panel j102 serv...

  • Page 67

    Optivend ng en 2016/12 rev. 2.0 67 9.3 power supply the 24 vdc supply [art.No. 1004606] consists of a 24 vdc – 65 w switched power supply and can be accessed by removing the rear wall. ● on an overload, the power supply switches itself off automatically. Reset the power supply by turning the main sw...

  • Page 68

    68 2016/12 rev. 2.0 optivend ng 10. Fault analysis warning ● when carrying out repairs and cleaning the device, the plug should always be removed from the wall socket before the device is opened. Preface before searching for the defect, check that all parts are in their correct position. To do this,...

  • Page 69

    Optivend ng en 2016/12 rev. 2.0 69 10.3 display messages during use display possible cause action make your choice rinsing rinse program not activated in time. Run the rinse program and follow the instructions in the display. See chapter 6. Maintenance / 6.1 daily rinsing program make your choice se...

  • Page 70

    70 2016/12 rev. 2.0 optivend ng display possible cause action your drink has been canceled the cup was taken away to quickly keep the cup in position during the drink preparation. Make your choice cup sensor left error the cup detection sensor as shown in the display is faulty cup detection window i...

  • Page 71

    Optivend ng en 2016/12 rev. 2.0 71 10.4 troubleshooting display possible cause action out of order e1 level error minimum electrode error: mini- mum electrode detects no water but maximum electrode does. Inlet valve shuts. Ensure the actual water level by opening the boiler. Water level up to max. L...

  • Page 72

    72 2016/12 rev. 2.0 optivend ng display possible cause action e8 mixer 2 error mixer 2 motor stalled. Mixer 2 motor output(s) over- loaded (current too high). The control has disabled the output. Check whether mixer 2 is contami- nated or incorrectly mounted. Clean and/or check whether the rotor tur...

  • Page 73

    Optivend ng en 2016/12 rev. 2.0 73 display possible cause action e20 software error software error reset the machine. Load the defaults. Install new software. E21 boiler timeout heating element active for 8 mi- nutes. If the boiler has still not come up to temperature, this error results. Steam- and...

  • Page 74

    74 2016/12 rev. 2.0 optivend ng 11. Special options 11.1 installation optivend ng hot & cold required equipment: • optivend h&c • base cabinet with cooling unit 1. Build the cooling unit in the cabinet according the instructions supplied. 2. Connect the machine to the water (incl. Water filter) and ...

  • Page 75

    Optivend ng en 2016/12 rev. 2.0 75 12. Payment systems 12.1 coin mechanism (optional) the optivend is available with an optional coin mechanism suitable for euros (€0.05 - €2.00). Other currencies are available on request. The coin mechanism can also easily be programmed to accept tokens. It is also...

  • Page 76

    76 2016/12 rev. 2.0 optivend ng s1 s2 10x 10x 12.1.3 activate existing token the token shown here is programmed in the coin mechanism as standard. Configure the service menu as described in the following section from point 4. Token art. No. : 03344 12.1.4 programming a new token ● required: 10 token...

  • Page 77

    Optivend ng en 2016/12 rev. 2.0 77 12.1.6 accepting tokens only (no euro’s) carry out sections 12.1.3 and 12.1.4 beforehand. 1. Open the service menu 2. Set to token using menu 2.2 button settings / button 1-12 / price. 3. Block the €0.05 - €2.00 coins using the coin mechanism dil switches and the t...

  • Page 78

    78 2016/12 rev. 2.0 optivend ng 12.2 coin changer (optional) the optivend is available with an optional coin changer suitable for euros (€ 0.05 to 2.00). Other currencies are available on request. The changer has 6 change tubes (€ 0.05 / 2x 0.10 / 0.20 / 0.50 / 1.00). 1. Return button 6. Coin insert...

  • Page 79

    Optivend ng en 2016/12 rev. 2.0 79 12.2.3 programme a new token the token shown opposite is already programmed in the coin changer [token a]. For programming a new token {[b] see detailed token teach instructions in the nri technical documentation. Attention; switch the machine off/on twice after a ...

  • Page 80: Optivend 32S Ng

    80 2016/12 rev. 2.0 optivend ng 248 56 8 501 72 112 149 224 36 0 50 1 11 8 501 91 61 5 327 23 6 80 5 optivend 11s ng optivend 21s ng optivend 22s ng optivend 32s ng ~ volt coin sy st em (optional) coin sy st em (optional) coin sy st em (optional) 308 - 320 coin sy st em (optional).

  • Page 81: Optivend 11S Ts Ng

    Optivend ng en 2016/12 rev. 2.0 81 686 72 224 360 501 501 112 149 308 - 320 235 100-155 248 91 615 327 922 236 501 optivend 11s ts ng ~ volt coin sy st em (optional) coin sy st em (optional) coin sy st em (optional) coin sy st em (optional).

  • Page 82

    82 2016/12 rev. 2.0 optivend ng 56 8 92 387 36 0 52 1 521 96 162 303 11 8 409 80 5 23 6 488 91 77 7 optivend 43 ng optivend 53 ng optivend 63 ng ~ volt * coin sy st em (optional) coin sy st em (optional) coin sy st em (optional) coin sy st em (optional) 468 - 480 optivend 32 ng optivend 42 ng optive...

  • Page 83

    Optivend ng en 2016/12 rev. 2.0 83 68 5 92 387 36 0 52 1 521 96 162 303 409 23 5 10 0- 15 5 488 91 77 7 92 2 23 6 ~ volt * coin sy st em (optional) 468 - 480 coin sy st em (optional) coin sy st em (optional) coin sy st em (optional) optivend 33 ts ng optivend 43 ts ng optivend 53 ts ng optivend 63 t...

  • Page 84

    84 2016/12 rev. 2.0 optivend ng 80 5 92 387 36 0 52 1 521 96 162 303 409 35 5 10 0- 15 5 77 7 488 91 10 41 23 6 optivend 11 tl ng.

  • Page 85

    Optivend ng en 2016/12 rev. 2.0 85 68 5 92 387 36 0 52 1 521 96 162 293 409 23 5 11 5 500 103 77 7 92 2 23 6 ~ volt * coin sy st em (optional) 468 - 480 coin sy st em (optional) coin sy st em (optional) coin sy st em (optional) optivend 22 ts hs duo ng optivend 42 ts hs duo ng optivend 53 ts hs duo ...

  • Page 86

    86 2016/12 rev. 2.0 optivend ng.

  • Page 87

    Optivend ng en 2016/12 rev. 2.0 87.

  • Page 88: Animo B.V.

    2016/12 rev. 2.0 art.Nr 1003785 dedicated to every cup animo b.V. Dr. A.F. Philipsweg 47 9403 ad assen the netherlands tel. No. +31 (0) 592 376376 fax no. +31 (0) 592 341751 e-mail: info@animo.Nl www.Animo.Eu.