ANJAN DTS-07 User Manual - page 3
3
1.
Use auto, manual or direct frequency input to locate the station.
2.
Press the Memory button , the LCD indicator will blink.
3.
Press the numeric buttons to store into the selected channel.
4.
Press the Memory button again to confirm.
Wake-to-Radio
Alarm Time Setting
Press the AL Set button to turn on the wake-to-radio function. The Alarm icon will be displayed. Long
press the AL. Set button to adjust the alarm time. You can use the numeric buttons or Hour/Min button
to set the alarm time. When finished, you will see the Alarm icon stay on. Press the AL. Set button
again to turn off the function.
(The radio will automatically turn on at the preset time. If no other operation is made, the radio will
turn off after 90 minutes’ operation or you can long press the Power button to turn off the radio)
Snooze Function
When the radio is turned on by the wake-to-radio button, press the AL Set button will enter into snooze
function i.e. the radio will suspend operation for 5 minutes. After that the radio will turn on again.
Sleep Mode
1.
Sleep Time Setting
(i)
Press the Power button will enter into 90 minutes sleep mode.
(ii)
Short press the Sleep button continuously to select the sleep time from 90 to 10 minutes
or OFF.
(iii)
When finished, the radio will return into radio mode for 5 seconds.
2.
Turn Off Sleep Mode - You can continuously press the Sleep button until you see the Sleep icon
disappear.
Intelligent Backlight
At day time, press the Night Light button to turn on the backlight. The backlight will stay on 8 seconds.
At night time, you can turn on the backlight by pressing any button. Long press the Night Light button
for 2 seconds and the backlight will remain always on. Press the button again to turn it off.
Use of Antenna :
1.
MW : The built-in magnetic antenna inside the radio is used. Rotate body to get best reception.