Quick start guide vectorstar ™ mn469xc series multiport test set vectorstar mn4694c, k connectors, for the ms4642a/b or ms4644a/b vna vectorstar mn4697c, v connectors, for the ms4645a/b or ms4647a/b vna part number: 10410-00738 revision: c published: june 2017 copyright 2017 anritsu company anritsu ...
1. Preparation qsg-2 pn: 10410-00738 rev. C vectorstar mn469xc qsg mn469xc series multiport test set this quick start guide provides a brief overview of the mn469xc multiport vna system assembly. For important safety and compliance information and for more details about the assembly, configuration, ...
2. System connections vectorstar mn469xc qsg pn: 10410-00738 rev. C qsg-3 2. System connections the figure below shows the front panel connections between the test set and vna. Make the semi-rigid cable connections as shown in figure 1 , figure 2 , and in table 1 . Front panel connections 1. Place t...
2. System connections qsg-4 pn: 10410-00738 rev. C vectorstar mn469xc qsg rear panel connections 1. Connect the gpib cable between the vna rear panel dedicated gpib connector and the test set ieee 488.2 gpib connector as shown in figure 2 . 2. On the vna rear panel, remove and set aside the eight sm...
2. System connections vectorstar mn469xc qsg pn: 10410-00738 rev. C qsg-5 table 1. Mn469xc multiport semi-rigid cable interconnect part numbers and locations (1 of 2) index part numbers description/torque connection from connection to front panel connections 1 3-62109-42 v (m-m) (mn4697c) -or- 3-673...
2. System connections qsg-6 pn: 10410-00738 rev. C vectorstar mn469xc qsg 8 3-62112-81 sma male-male semi-rigid tighten using an 8 mm (5/16 in) torque end wrench set to 0.9 n·m (8 lbf·in). Ms464xb port labeled: p1 source loop out mn469xc port labeled: to vna port 1 src output 9 3-62112-80 sma male-m...
3. Rear panel dip switch gpib address setting vectorstar mn469xc qsg pn: 10410-00738 rev. C qsg-7 3. Rear panel dip switch gpib address setting the mn469xc series test set gpib address must match the gpib address set on the vna and is set on the test set by rear panel dip switches. The factory defau...
Anritsu company 490 jarvis drive morgan hill, ca 95037-2809 usa http://www.Anritsu.Com anritsu utilizes recycled paper and environmentally conscious inks and toner..
