Summary of Scan16
Page 2
Ansr audio scan16 professional wireless table of contents 1. Introduction 3 2. Safety 3 3. Environment 3 4. Wireless note 3 5. Quick start guide 4 6. Product description 6.1 receiver 6.2 handheld transmitter microphone 6.3 bodypack transmitter 5 7 8 7. Setting up 7.1 connecting the receiver to power...
Page 3
Wireless wireless note fcc statement this device complies with part 15 of the fcc rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired ...
Page 4
Quick start wireless 5. Quick start guide 1. Insert fully charged batteries into the transmitter. Your ansr audio transmitter will operate on either rechargeable or alkaline batteries. 2. Make audio output and power connections as described in section 7. 3. If connecting to a mixer mic input, set th...
Page 5
Wireless product description 6. Product description 6.1 receiver the aw-25 receiver is designed for use only with ansr audio 16-channel selectable channels transmitters. The receiver operates in uhf 682-697 mhz frequency band with pll synthesized control. Powered by 12v dc..
Page 6
1. Power: press for 4 seconds to power the receiver on or off. 2. Channel display: led channel displays the channel number. 3. Button △: when the led display starts flashing, press this button to change the channel forward. 4. Button ▽: when the led display starts flashing, press this button to chan...
Page 7
Wireless product description 6.2 aw-1 handheld microphone the handheld microphone operates in uhf band frequency with pll synthesized control. Uhf 16 pre-programmed selectable frequencies to avoid interference. Uni-directional dynamic element provides excellent sound and durability. Use 2 x dc1.5v a...
Page 8
Product description wireless 5.3 aw-6 bodypack transmitter the bodypack transmitter operates in uhf band frequency with pll synthesized control. Uhf 16 preprogrammed selectable frequencies to avoid interference. Use 1.5v x 2 aa size dry or rechargeable batteries for low operating cost. 1. Mini xlr c...
Page 9
Wireless setting up 7. Setting up notice: prior to setting up, please check that the transmitter and receiver are tuned to the same frequency. Two or more transmitters operating in the same frequency can not be used at the same time and area. So for each extra transmitter, please select a different ...
Page 10
Setting up wireless 7.3 setting up channel on receiver notice: do not put two or more transmitters operating nearby when setting up the frequency channel. Please keep transmitter at least one meter away from receiver. 7.3.1 manual mode setting interference-free channel by manual operation. Press but...
Page 11
Wireless troubleshooting 7.6 setting up the bodypack transmitter a. Connecting a microphone open the battery cover. Push the mic/line switch to “mic” and use the supplied screw- driver to adjust the gain at appropriate position. Plug the mini xlr connector of the microphone cable into the audio inpu...
Page 12
2 1 3 5 4 balanced audio output unbalanced line 8/9 6/7 10/11 l o u tpu t r squelch m ic 12v 500ma dc only ac/dc adapter basic connections wireless 9. Basic connections connect the receiver output to the audio mixer or amplifier input, using a standard audio cable with 6.3 ϕ phone plugs. Never use t...
Page 13
Power o r rf af set/scan dc out volume o pe n wireless basic connections to combine two receivers in a 19” standard rack by using 2 short l type plastics racks (l2) and 2 metal connecting plates (c1). (each system includes a l2 and a c1.) c1 l2 l1 charging connecting diagram connect the supplied dc1...
Page 14
Features & specifications wireless 10. System features operating in an fcc-safe uhf frequency band – 16 operating frequencies over 3 television channels (49, 50, 51). Automatically scans upward to the next open frequency at the touch of a button. Switching antenna diversity to ensure the reception q...
Page 15
Wireless microphones the ansr audio aw-6 bodypack transmitter will accept any properly wired ansr audio or special projects microphone. A wide variety of headworn and lavalier microphones are available from your ansr audio / special projects dealer. Am-17 / am-17t the ultimate in headworn wireless. ...