- DL manuals
- ANTAIRA
- Network Router
- LNX-1002C-SFP Series
- User Manual
ANTAIRA LNX-1002C-SFP Series User Manual
Summary of LNX-1002C-SFP Series
Page 1
Antaira industrial ethernet switches lnx-1202g-sfp series user manual v1.0 i lnx-1202g-sfp series 12-port industrial gigabit unmanaged ethernet switches 10*10/100/1000tx + 2*100/1000 sfp slot user manual version 1.0
Page 2
Antaira technologies - industrial ethernet switches lnx-1202g-sfp series user manual v1.0 ii © copyright 2015 antaira technologies, llc all rights reserved this document contains information, which is protected by copyright. Reproduction, adaptation or translation without prior permission is prohibi...
Page 3
Antaira technologies - industrial ethernet switches lnx-1202g-sfp series user manual v1.0 iii fcc notice this equipment has been tested and found to comply with the limits for a class-a digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection a...
Page 4: Table Of Contents
Antaira technologies - industrial ethernet switches lnx-1202g-sfp series user manual v1.0 iv table of contents 1.Overview ....................................................................... 1 1.1 key features .................................................... 1 1.2 package contents ..............
Page 5: 1. Overview
Antaira industrial ethernet switches lnx-1202g-sfp series user manual v1.0 1 1. Overview antaira technologies ’ lnx-1202g-sfp industrial gigabit unmanaged ethernet switch series is ip30 rated and din-rail mountable. Each unit is designed with 10 gigabit ethernet ports and two dual rate (100/1000) sf...
Page 6: 1.2 Package Contents
Antaira technologies - industrial ethernet switches lnx-1202g-sfp series user manual v1.0 2 1.2 package contents 1 - lnx-1202g-sfp (t): 12-port industrial gigabit unmanaged ethernet switch, with 10*10/100/1000tx + 2*100/1000 sfp slots 1 - user manual 1 - product cd 2 - wall mounting brackets a...
Page 7: 2. Hardware Description
Antaira technologies - industrial ethernet switches lnx-1202g-sfp series user manual v1.0 3 2. Hardware description 2.1 physical dimensions figure 2.1, below, shows the physical dimensions of antaira ’s lnx-1202g-sfp series: 12-port industrial gigabit unmanaged ethernet switch with 10*10/100/1000tx ...
Page 8: 2.2 Front Panel
Antaira technologies - industrial ethernet switches lnx-1202g-sfp series user manual v1.0 4 2.2 front panel the front panel of the lnx-1202g-sfp series industrial gigabit unmanaged ethernet switch is shown below in figure 2.2. 2.3 top view figure 2.3, below, shows the top panel of the lnx-1202g-sfp ...
Page 9: 2.4 Led Indicators
Antaira technologies - industrial ethernet switches lnx-1202g-sfp series user manual v1.0 5 2.4 led indicators there are led light indicators located on the front panel of the industrial ethernet switch that display the power status and network status. Each led indicator has a different color and ha...
Page 10
Antaira technologies - industrial ethernet switches lnx-1202g-sfp series user manual v1.0 6 rj-45 pin assignments (table 2.2) pin number assignment 1 rx+ 2 rx- 3 tx+ 6 tx- all ports on this industrial ethernet switch support automatic mdi/mdi-x operation. Users can use straight-through cables (see f...
Page 11
Antaira technologies - industrial ethernet switches lnx-1202g-sfp series user manual v1.0 7 the following figures show the 10,100, and 1000 ethernet rj-45 pin outs. Figure 2.7 figure 2.8 straight-through cable schematic crossover cable schematic figure 2.6 rj45 ethernet port pin outs.
Page 12: 2.6 Cabling
Antaira technologies - industrial ethernet switches lnx-1202g-sfp series user manual v1.0 8 2.6 cabling use the four twisted-pair, category 5e, or the above cabling for rj-45 port connections. The cable between the switch and the link partner (switch, hub, workstation, etc.) must be less than 100 me...
Page 13
Antaira technologies - industrial ethernet switches lnx-1202g-sfp series user manual v1.0 9 second, insert the fiber cable of the lc connector into the transceiver as shown below in figure 2.11. To remove the lc connector from the transceiver, please follow the steps shown below: 1. Press the upper ...
Page 14
Antaira technologies - industrial ethernet switches lnx-1202g-sfp series user manual v1.0 10 2.7 wiring the power inputs please follow the steps below to insert the power wire. 1. Insert the positive and negative wires into the pwr1 (v1+, v1-) and pwr2 (v2+, v2-) contacts on the terminal block conne...
Page 15
Antaira technologies - industrial ethernet switches lnx-1202g-sfp series user manual v1.0 11 2.8 wiring the fault alarm contact the fault alarm contact is in the middle of the terminal block connector as the picture shows below in figure 2.16. By inserting the wires, it will detect the fault status ...
Page 16: 3. Mounting Installation
Antaira technologies - industrial ethernet switches lnx-1202g-sfp series user manual v1.0 12 3. Mounting installation 3.1 din-rail mounting the din-rail is pre-installed on the industrial ethernet switch from the factory. If the din-rail is not on the industrial ethernet switch, please see figure 3....
Page 17
Antaira technologies - industrial ethernet switches lnx-1202g-sfp series user manual v1.0 13 follow the steps below to learn how to hang the industrial ethernet switch. 1. Use the screws to install the din-rail bracket on the rear side of the industrial ethernet switch. 2. To remove the din-rail bra...
Page 18: 3.2 Wall Mounting
Antaira technologies - industrial ethernet switches lnx-1202g-sfp series user manual v1.0 14 3.2 wall mounting follow the steps below to mount the industrial ethernet switch using the wall mounting bracket as shown below in figure 3.4. 1. Remove the din-rail bracket from the industrial ethernet swit...
Page 19: 4. Hardware Installation
Antaira technologies - industrial ethernet switches lnx-1202g-sfp series user manual v1.0 15 4. Hardware installation 4.1 installation steps this section will explain how to install antaira ’s lnx-1202g-sfp series: 12-port industrial gigabit unmanaged ethernet switch with 10*10/100/1000tx + 2*100/10...
Page 20: 5. Network Application
Antaira technologies - industrial ethernet switches lnx-1202g-sfp series user manual v1.0 16 5. Network application this segment provides an example of an industrial ethernet switch application (figure 5.1). Figure 5.1 industrial ethernet switch application reference.
Page 21: 6. Trouble Shooting
Antaira technologies - industrial ethernet switches lnx-1202g-sfp series user manual v1.0 17 6. Trouble shooting verify you have the right power cord or adapter. Never use a power supply or adapter with a non-compliant dc output voltage or it will burn the equipment. Select the proper utp or stp cab...
Page 22: 7. Technical Specifications
Antaira technologies - industrial ethernet switches lnx-1202g-sfp series user manual v1.0 18 7. Technical specifications table 7.1 has the technical specifications for antaira ’s lnx-1202g-sfp series: 12-port industrial gigabit unmanaged ethernet switch with 10*10/100/1000tx + 2*100/1000 sfp slots. ...
Page 23
Antaira technologies - industrial ethernet switches lnx-1202g-sfp series user manual v1.0 19 installation din-rail mounting, wall mounting (optional) operating temperature standard: -10 o c to 70 o c (14° to 158° f) eot: -40 o c to 75 o c (-40° to 167° f) operating humidity 5% to 95% (non-condensing...