ANTAIRA MSC-202A-V2 Installation Manual

Page of 4

Download

Bookmark us

Congratulations on your purchasing this high performance PCI

Express serial and parallel I/O adapter. The adapter is high

speed PCI Express bus based and plug-and-play compliant. Its

serial ports are fully 16C950 UART compatible with most of the

RS232C devices available from the market.

The common features of the PCI Express I/O family as follows:

Full x1 PCI Express Throughput, 250Mbytes/sec

Works in 5V and 3.3V Tolerance Options

Fully Compliant with PCI Express Base

Specifications, Revision 1.0a

16C950 UARTs, Fully Compatible with 16C550, Baud Rate up

to 921.6Kbps

Low Profile PCI Express model available with different

brackets

Supports Win98/Me, NT, 2000, XP, Vista, 2003, & Windows 7

Figure 2-1. 2S Model Board Layout

MSC-202A-V2

Installation Guide

S1 Internal Header Connector JP2 External Power Enabler

JP3 External Power Selector

J7 Aux. Power

Connector

1. Introduction

2. Board Layouts

1 2 3 4 Next › »

Page 1
Congratulations on your purchasing this high performance pci express serial and parallel i/o adapter. The adapter is high speed pci express bus based and plug-and-play compliant. Its serial ports are fully 16c950 uart compatible with most of the rs232c devices available from the market. The common f...
Page 2: 3. Jumper Settings
Pci express multi serial i/o adapter 2 jp2- external power enabler: there are 4 jumpers that control the pin-9 signal of the 4 serial ports connectors (s1~s4) respectively. If the jumper(s) is at the “dis” position (factory default), the pin-9 was connected with the ri signal as standard rs232 defin...
Page 3: Note:
Pci express multi serial i/o adapter 3 note: please do not let windows auto search the drivers on the cd, it will cause problems because the inf files will be conflict in this case. Instead, please browse to the correct location (folder) manually to make sure the correct drivers are chosen and insta...
Page 4
Pci express multi serial i/o adapter 4 3. Click〝 next 〞to continue, and click〝 finish 〞to complete the installation. 4. To check the installation, right click on〝my computer〞and choose〝manage〞. Choose〝 device manager 〞and double click 〝 ports 〞..