ANTAIRA MSC-202AL Installation Manual

Page of 4

Download

Bookmark us

Congratulation on your purchasing this high performance PCI Express

Multi Serial I/O adapter. The adapter is high speed PCI Express bus

based and plug-and-play compliant. Its serial ports are fully 16C950

UART compatible with most of the RS232C devices available from the

market.

Features:

Full x1 PCI Express Throughput, 250Mbytes/sec

Fully Compliant with PCI Express Base

Specifications, Revision 1.0a

16C950 UARTs, Fully Compatible with 16C550, Baud Rate up to

921.6Kbps

Multi-mode compatible (SPP, EPP, ECP) (for 2S1P and 4S1P models

only)

Low Profile PCI Express model available with different brackets

Supports Win98/Me, NT, Windows 2000 and XP, 2003 and Vista

MSC-202AL/ALP

Installation Guide

1. Introduction

2. Layout

J8: DB44 pin

Connector to

Cable

J7: Aux. Power

Connector

J2~J5: Internal S1~S4 with

10-pin Header Connectors

JP3: Aux Power

Source Selector

JP2: Power over

Serial Connectors

Enable/Disable

JP1: Parallel Port

Disable/Enable

1 2 3 4 Next › »

Page 1
1 congratulation on your purchasing this high performance pci express multi serial i/o adapter. The adapter is high speed pci express bus based and plug-and-play compliant. Its serial ports are fully 16c950 uart compatible with most of the rs232c devices available from the market. Features: full x1 ...
Page 2
Pci express multi serial i/o card 2 jp3 external power selector (pin 9) settings power source is +5vdc, from j7 aux power connector. Power source is +12vdc, from j7 aux power connector. Power source is +12vdc, from pci express golden finger (motherboard’s pcie slot). (default) db9-male pin assignmen...
Page 3: Note:
Pci express multi serial i/o adapter 3 1. Turn the system power off before installation! 2. Use static electricity discharge precautions. 3. Remove the chassis cover from your computer 4. Locate an unused pci express slot (typically white and smaller) and remove the corresponding slot cover from com...
Page 4
Pci express multi serial i/o card 4 1. When the pci card was inserted, it will invoke windows’ new hardware wizard. Click〝 next 〞to continue, select〝 install from a list or specific location（advanced）〞and click〝 next 〞. 2. Select〝 include this location in the search 〞then click〝 browse 〞 to specify...