ANTAIRA msc-216a Installation Manual

Summary of msc-216a

  • Page 1

    1 congratulations on purchasing the high performance pci express multi-serial host adapter. The adapter is high speed pci express bus based and plug-and-play compliant. Its 16c950 uart based serial ports (128-byte deep fifo) are fully 16c550 uart compatible with most of the rs232c devices available ...

  • Page 2: 3. Jumper Settings

    16-port rs-232 multi serial pci express card 2 1. Jp1, jp2- external power enabler: these 2 jumpers are used to enable or disable the option of supplying power over pin 9 of the eight db9 connectors of s1~s8 and s9~s16. Jp1, jp2: external power enabler settings disable power on db9m pin 9 (default) ...

  • Page 3: 4. Software Installation

    16-port rs-232 multi serial pci express card 3 the drivers of the pcie card for each operating system were shipped in the following different folders on the driver cd: when the windows detect the pcie card, it will invoke its installation wizard: 4. Software installation drivers are in each correspo...

  • Page 4

    16-port rs-232 multi serial pci express card 4 note: for windows 2000 installation, we recommend you to choose “install from a list or specific location (advanced)” from the following menu, then browse to the correct driver location (\io\oxford2\2000\...) for windows 2000. It will prevent from the w...

  • Page 5

    16-port rs-232 multi serial pci express card 5 *note: the pin 9 of the db9 male connector supports dc5v or dc12v depends on the settings of the jp1 and jp2, please refer to the above sections for more detail information check windows version showed in the folder here: xp32 in this example 5. Male db...

  • Page 6: 6. Specification

    16-port rs-232 multi serial pci express card 6 db9(male) to db9(male) wiring type specification connectors cable bus interface number of ports rs-232 signals baud rate data bits stop bits i/o address/irq parity vhdci-68 vhdci-68-to-db9mx16 octopus type 1-lane pci express 16 txd, rxd, rts, cts, dtr, ...

  • Page 7

    16-port rs-232 multi serial pci express card 7 flow control power requirement operating temperature operating humidity storage temperature rts/cts, xon/xoff 3.3v/500ma 0 to 55 ° c(32 to 132 ° f) 5 to 95% rh -20 to 85 ° c (-4 to 185 ° f).