ANTAIRA STW-601C Quick Start Manual - 4. Pin Assignments
Quick Start Guide
Wireless Serial to Ethernet Server
STW-601C
Copyright © 2013 Antaira Technologies, LLC
All rights reserved.
3
Configure by Telnet utility
Step 1: Telnet to the STW-601C using command “Telnet IP_address”. Default IP address is
10.0.50.100 and default password is null.
Step 2: COM ports and wireless settings can be configured individually.
Step 3: The connection status is shown from “AP version” column of monitoring tool
(Monitor.exe).
4. Pin assignments
Mini DIN connector pin assignments for Serial port:
Mini-DIN
DB9
Pin#
RS-232
2 wire RS-485
4 wire RS-422
1
DCD
2
RXD
Tx+
3
TXD
Data+
Rx+
4
DTR
5
SG (Signal Ground)
6
DSR
7
RTS
Data-
Rx-
8
CTS
Tx-
Terminal block pin assignments for Serial port and Power
5-pin for serial connections
RS-232
RS-485
RS-422
3-pin for Power input
SG
GND
GND
GND
FG
FG
RTS/R-
RTS
Data-
R-
Vin-
GND
TxD/R+
TxD
Data+
R+
Vin+
9~30V
CTS/T-
CTS
T-
RxD/T+
RxD
T+
5. Customer Services and Supports
1) Contact your local dealers or Antaira Technical Support at the following numbers.
1-877-229-3665
1-714-671-9000
2) Report the errors via website or e-mail
www.antaira.com / support@antaira.com