1 f-1 fazer user manual english © 2014 antari lighting and effects ltd..
2.
3 user manual - english safety information please read the following safety information carefully before operating the machine. This information includes important safeguards about installation, usage, and maintenance. Pay attention to all warning labels and instructions in this manual and printed o...
4 ․ only use antari fluid. Other fluid may lead to heater clog and malfunction. ․ if the machine fails to work, unplug the machine and stop operation immediately. Contact your local antari dealer for advise. ․ before transporting the machine, make sure the fluid tank is completely drained. ․ fog flu...
5 product overview setting up step 1: place the machine on a flat surface and in a suitable large area with at least 50 cm open space around the machine. Step 2: fill the fluid tank with antari approved fluid. Step 3: connect the machine to suitable rated power supply.To determine the power requirem...
6 step 5: to start making haze, press the volume button on the control panel. Step 6: to turn off the machine, hold the stop button for 3 seconds; the machine will automatically run a self-cleaning process and shut off after the process is done. Operation control panel operation the machine can be o...
7 set output volume at timer mode from 1 to 100 % set output volume at volume mode from 1 to 100 % set fan speed from 20 to 100% set dmx/w-dmx address from 1 to 511 turn on/off wireless remote control function turn on/off air pump sensor select dmx mode from 2ch, 1ch, and sync mode turn on/off w-dmx...
8 dmx connector pin assignment the machine provides a 3- or 5-pin xlr connector for dmx connection. The diagram below indicates pin assignment information. Pin function 1 ground 2 data- 3 data+ dmx operation making the dmx connection – connect the machine to a dmx controller or to one of the machine...
9 dmx channel function channel mode channel value function 2 1 0-4 faze off 5-255 faze 1-100% 2 0-4 fan 20% 5-255 fan 21-100% 1 1 0-4 faze off fan 100% 5-255 faze 1-100% fan 100% sync 1 0-4 faze off fan 20% 5-255 faze 1-100% fan 21-100% status of w-dmx connection (optional) symbol on the liquid crys...
10 *transmitter with the transmitter, it is possible to make haze output via radio signal at maximum distance of 50 meters. Press the button “a” to produce haze output and press the button “b” to stop hazing. *receiver if the optional wireless remote control function is selected and included, a radi...
11 3. One machine can be controlled by up to 5 transmitters while one transmiter can be registered to unlimited number of machines. Service and maintenance ․ do not allow the machine and fluid to become contaminated. ․ regularly fill distilled water to fluid tank and run the machine to clean the sys...
12 c08f00100
