Summary of Z-1520 RGB
Page 1
1 z-1520 rgb fog machine user manual english © 2014 antari lighting and effects ltd..
Page 2
2 user manual - english safety information please read the following safety information carefully before operating the machine. Information includes important safety information about installation, usage, and maintenance. Pay attention to all warning labels and instructions in this manual and printe...
Page 3
3 ․ before transporting the machine, make sure the fluid tank is completely drained. ․ smoke fluid may present health risks if swallowed. Do not drink smoke fluid. Store it securely. In case of eye contact or if fluid is swallowed immediately look for medical advice. Unpacking and inspection immedia...
Page 4
4 product overview setting up step 1: place the machine on a flat surface and in a suitable large area with at least 50 cm open space around the machine. Step 2: fill the fluid tank with antari approved fluid. Step 3: connect the machine to suitable rated power supply. To determine the power require...
Page 5
5 fog”. Now the machine is ready for operation. Step 5: to start making fog, locate the volume button on the control panel, and press the button to start making fog. Step 6: to turn off the machine, press stop button and turn powercon to the off position. Operation control panel operation the machin...
Page 6
6 turn led on or off set led output color from macro 1 to 10 set led chase from 1 to 15 set interval from 15 to 360 seconds set duration from 1 to 5 seconds turn on or off wireless control set wireless remote button function macro color 1 to 10 or chase 1 to 15 and off. Set wireless remote button fu...
Page 7
7 setting for led to turn on with fog only or always on. Set led delay time from 0 to 5 seconds. Turn on/off run last setting function wireless operation wireless remote control system w-2 consist of a transmitter equipped with four buttons to activate four user configurable led setting and fog; wit...
Page 8
8 section to setup each buttons. In a free open space the effective distance is 50 meters, actual usage depending on obstacle level the effective distance is 10-25 meters. Registering transmitter transmitter can be pair or deleted from the receiver. Each receiver can pair up to 10 transmitters. Foll...
Page 9
9 pin function 1 ground 2 data- 3 data+ dmx channel function channel 1 dmx value range function fog 0 – 4 5 – 255 fog off fog on channel 2 dmx value range function red led 0-255 0-100% channel 3 dmx value range function green led 0-255 0-100% channel 4 dmx value range function blue led 0-255 0-100% ...
Page 10
10 chase speed 0-255 0-255 step per min channel 7 dmx value range function master dimmer 0-255 0-100% channel 8 dmx value range function strobe 0-255 1-20 hz fluid only use antari flc water-based liquid for the z-1520 rgb fogger. The machine is tested and calibrated with this liquid to get the best ...
Page 11
11 step 1: disconnect ac power step 2: flip breaker to on position step 3: turn on machine to test breaker 120v = 15a 250v 230v = 9a 250v technical specifications input voltage 120v 60hz 230v 50hz breaker 120v = 15a 250v 230v = 9a 250v heater 1550w warm-up time 5 min. (approx.) coverage volume heigh...
Page 12
12 c08z15200