Antec Fusion Remote Max User Manual

Other manuals for Fusion Remote Max: User Manual

Summary of Fusion Remote Max

  • Page 1

    Fusion remote max user’s manual manuel de l’utilisateur anwenderhandbuch manuale per l’operatore manual del usuario পᡅ䂀ᯢ᳌ tm media components Ё᭛Փ⫼᠟ݞ.

  • Page 2: Disclaimer

    1 at antec, we continually refine and improve our products to ensure the highest quality. As such, it’s possible that your new case may differ slightly from the description in this manual. This isn’t a problem; it’s simply an improvement. As of the date of publication, all features, descriptions, an...

  • Page 3

    2 1. Lay the case down, with the top open. 2. Make sure you have the correct i/o panel for your motherboard. If the panel provided with the case isn’t suitable, please contact your motherboard manufacturer for the correct i/o panel. 3. Line up your motherboard with the standoff holes, and remember w...

  • Page 4

    3 the 10-pin connector to the motherboard headers so that the blocked pin fits over the missing header pin. Note: please check the motherboard manual for the usb header pin layout and make sure it matches the following table. Motherboard usb pin layout pin signal names pin signal names 1 usb power 1...

  • Page 5

    4 pin assignment for audio ports (hda and ac’97) pin signal names (hda) pin signal names (ac’97) 1 mic2 l 1 mic in 2 agnd 2 gnd 3 mic2 r 3 mic power 4 avcc 4 nc 5 fro-r 5 line out (r) 6 mic2_jd 6 line out (r) 7 f_io_sen 7 nc 8 key (no pin) 8 key (no pin) 9 fro-l 9 line out (l) 10 line2_jd 10 line ou...

  • Page 6

    5 c. Navigating imedian hd use the 4-way buttons to navigate imedian hd. Holding the left and right buttons will take you to the “home” and “menu” screens d. Local media users can easily enjoy music, videos, and pictures on their pc by using just the remote control. Imedian hd supports every essenti...

  • Page 7

    6 3. Find a 4-pin molex or sata connector on the power supply and connect it to the power connector on the device. The cable management there is a cable management compartment under the 5.25” flip-up cage. Remove the cage to expose the compartment. Hide or route your excess cables to this compartmen...

  • Page 8

    7 note: the minimum voltage to start the fan is 5v. We recommend our users to set the fan speed to high if you choose to connect the fan to a fan control device. A fan-controller regulates the fan speed by varying the voltage to it. The voltage may start as low as 4.5v to 5v. Connecting a tricool™ f...

  • Page 9

    8 the washable air filters there are two filters located behind the front bezel door. 1. Flip down the front bezel door. 2. Push to release one of the filters from its holding position 3. Wash the filter with water. 4. Insert the filter back to its original position until it clicks. From time to tim...

  • Page 10

    9 rm200 1. Application exit: close the active window or close imedian hd [alt + f4] 2. Power: turn the pc on/off (power switch also located on the internal receiver) 3. Record 4. Media control group 1: play/pause/stop/open/prev/next/rew/f.Fwd 5. Mouse/keyboard: switch the pad controller between a mo...

  • Page 11

    Antec, inc. 47900 fremont blvd. Fremont, ca 94538 usa tel: 510-770-1200 fax: 510-770-1288 antec europe b.V. Stuttgartstraat 12 3047 as rotterdam the netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 customer support: us & canada 1-800-22antec customersupport@antec.Com europe +31 (0) 10 4...