Isk 300-65 u ser ’ s m anual.
1 t able of c ontents i ntroduction 1.1 case specifications.…..………………………………………………………………………………….. 3 1.2 diagram…………………………………………………………………….…………………………………. 3 1.3 power supply specifications…………………………………………………………………………. 4 h ardware i nstallation g uide 2.1 removing the top panel.…………………………………………………………………...
2 isk 300-65 u ser ’ s m anual at antec, we continually refine and improve our products to ensure the highest quality. It’s possible that your new case will differ slightly from the descriptions in this manual. This isn’t a problem; it’s simply an improvement. As of the date of publication, all feat...
3 1.1 c ase s pecifications case type mini-itx desktop color black dimensions 96mm (h) x 222mm (w) x 328mm (d) 3.8” (h) x 8.7” (w) x 12.9” (d) net weight 5.5 lbs / 2.5 kg cooling 1 x side 80mm tricool™ fan drive bays 3 drive bays: - 1 x external 5.25” slim drive bay - 2 x internal 2.5” drive bays ex...
4 1.3 p ower s upply s pecifications the isk 300-65 is powered by an ep-65 power adapter. Input characteristics: input voltage range frequency range 100 vac ~ 240 vac 50 hz ~ 60 hz output characteristics: continuous power rated voltage voltage range output current ripple & noise 65w 19v 18.4v ~ 20.0...
5 h ardware i nstallation g uide 2.1 r emoving the top panel place the case flat on an even, stable surface. 1. Remove the three thumbscrews from the rear of the top panel. 2. Grip the top panel and slide it back several inches until it stops. 3. Grip the panel from the sides and lift it up until it...
6 2.4 i nternal 2.5” d evice i nstallation remove the top panel as described in section 2.1. Included at the top of the drive tray assembly is a hdd tray that can support up to two 2.5” devices. 1. On the right side of the drive tray assembly, remove the thumbscrew holding the hdd tray to the rest o...
7 pin signal names pin signal names 1 usb power 1 2 usb power 2 3 negative signal 1 4 negative signal 2 5 positive signal 1 6 positive signal 2 7 ground 1 8 ground 2 9 key (no connection) 10 empty pin pin signal names (hda) pin signal names (ac’97) 1 mic2 l 1 mic in 2 agnd 2 gnd 3 mic2 r 3 mic power...
8 3.4 p ower s witch / r eset s witch / h ard d isk d rive led c onnectors connected to your front panel are led and switch leads for power, reset, and hdd led activity. Attach these to the corresponding connectors on your motherboard. Consult your motherboard user’s manual for specific pin header l...
9 c ooling s ystem 4.1 t ri c ool ™ e xhaust f an there is a 80 x 25mm tricool™ fan pre-installed on the right-hand side of the case. It has an external, three-speed switch that allows you to choose between quiet performance, or maximum cooling. The default speed setting is low. The fan is mounted s...
10 antec, inc. 47900 fremont blvd. Fremont, ca 94538 usa tel: 510-770-1200 fax: 510-770-1288 antec europe b.V. Stuttgartstraat 12 3047 as rotterdam netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 customer support: us & canada 1-800-22antec customersupport@antec.Com europe +31 (0) 10 46...
