New solution series nsk 3300 user’s manual manuel de l’utilisateur anwenderhandbuch manuale per l’operatore manual del usuario পᡅ䂀ᯢ.
1 at antec, we continually refine and improve our products to ensure the highest quality. So it’s possible that the new case may differ slightly from the descriptions in this manual. This isn’t a problem; it’s simply an improvement. As of the date of publication, all features, descriptions, and illu...
2 the dual chamber structure the case is divided into two chambers — the motherboard chamber and the power supply chamber to separate heat and noise from each section for maximum quiet and cool operation. Set up 1. Take the case out of the box. Remove the biodegradable carton and plastic bag. 2. Pla...
3 2. Connect the reset switch (labeled reset sw) to the motherboard at the rst connector. Make sure the label always faces the front of the case. 3. Power led (labeled power led) connector is located behind the reset connector. 4. Power switch (labeled power sw) connects to the pwr connector on the ...
4 pin assignment for front panel ieee 1394 connector connecting the audio ports there is an intel standard 10-pin connector (with 7 individual wires with connectors) coming out from the front panel speaker and microphone connection. If the motherboard supports intel’s standard onboard audio connecto...
5 note: we recommend using the upper drive tray (the one inside the lower 5.25” drive bay) as it will provide better cooling and cable management. Using the hdd bay at the bottom of the case may result in being unable to use the 4th pci slot depending on the length of the card used. 5. Find a 4-pin ...
6 specifications: size: 120 x 120 x 25.4mm rated voltage: dc 12v operating voltage: 10.2v ~ 13.8v the front 92mm fans this case comes with two optional 92mm fan mounts in the front of the case. The front fan should be installed so that the air is blowing into the case from the front. We recommend us...
Antec, inc. 47900 fremont blvd. Fremont, ca 94538 usa tel: 510-770-1200 fax: 510-770-1288 antec europe b.V. Sydneystraat 33 3047 bp rotterdam the netherlands tel: +31 (0) 10 462-2060 fax: +31 (0) 10 437-1752 customer support: us & canada 1-800-22antec customersupport@antec.Com europe +31 (0) 10 462-...
